含浸樹脂市場レポート：動向、予測、競合分析 (2031年まで)

世界の含浸樹脂市場の将来性は、モーター・発電機、家電製品、変圧器、自動車部品市場に機会があり、有望視されています。含浸樹脂の世界市場は、2025年から2031年までのCAGRが6.6%で、2031年までに推定30億米ドルに達すると予想されます。この市場の主な促進要因は、電気産業、特に配電に使用される変圧器や自動車のパワートレインシステムのローターやモーターなどの用途での需要が増加していること、高出力化、モーターや発電機の長寿命化、最先端機械の導入などのニーズが高まっていることです。

• Lucintel社によると、種類別では、優れた安定性、強力な反応性、常温含浸性、柔軟な加工性により、予測期間中、無溶剤型がより大きなセグメントであり続けると予測しています。
• 用途別では、電気自動車需要の増加により、自動車部品のが最も高い成長を示すと予想されます。
• 地域別では、発展途上国における農村部の電化により、アジア太平洋が予測期間中に最も高い成長を遂げると予想されます。

含浸樹脂市場の戦略的成長機会

含浸樹脂市場には、技術や産業要件の変化による主要用途を通じて、戦略的な成長機会が生まれています。これらの機会は、市場での存在感を高め、樹脂ソリューションの技術革新を推進する上で重要です。

• エレクトロニクス産業：エレクトロニクス産業は、特に優れた電気絶縁性と熱安定性を必要とする用途において、含浸樹脂の大きな可能性を示しています。近代的で統合されたエレクトロニクスは、高い信頼性を可能にする性能向上樹脂をますます要求しています。
• 自動車産業：この業界は、靭性、耐久性、悪条件への耐性を必要とする部品に樹脂含浸の膨大な用途を見出すと思われます。樹脂配合の改善は高性能自動車部品の製造につながり、市場の成長を促進します。
• 再生可能エネルギーの応用：風力発電や太陽光発電プロジェクトの開発により、過酷な条件下でも保護と性能を発揮する含浸樹脂の需要が高まっています。エネルギー用途の部品の耐久性を高める樹脂は、この成長市場に参入することができます。
• インフラ開発：橋やビルなどのインフラプロジェクトが勢いを増しており、含浸樹脂の機会を生み出しています。建設用途では含浸樹脂の需要が増加し、耐久性と性能が強化されるため、市場成長が促進されると予想されます。
• 消費財：家電製品や電子機器に加え、消費財分野も樹脂含浸のもう一つの有利な分野であり、審美的・機能的特性の向上が期待できます。先進的な樹脂ソリューションは、消費財分野でますます要求されるようになった高品質を満たすことができます。

エレクトロニクスから再生可能エネルギーまで、様々な用途における技術の進歩は、含浸樹脂市場における戦略的成長機会を含んでいます。こうした機会を捉えることで、イノベーションが促進され、新製品の提供による市場開拓が進み、全体的な成長が確保されます。

含浸樹脂市場の促進要因・課題

含浸樹脂市場は、技術、経済、規制に関連する市場促進要因・課題に直面すると思われます。これらの要因は、市場動向、成長の可能性、革新的な樹脂ソリューションの開発を形成します。

含浸樹脂市場を牽引する要因は以下の通りです：

• 技術の向上：配合や硬化技術の改良など、樹脂技術の革新が市場を前進させる。これらの進歩は、より優れた性能と用途の多様性をもたらし、エレクトロニクスや自動車などの産業で高まる需要を満たします。
• 高性能材料への需要の増加：航空宇宙、自動車、再生可能エネルギーなどの業界からの高性能材料に対する需要の高まりが、高度含浸樹脂の必要性を高めています。高性能樹脂は、耐久性、絶縁性、保護性に優れ、産業界のニーズに応えます。
• 持続可能性に関する規制支援：環境に優しい樹脂を採用する大きな原動力となっているのが、持続可能性に関する支援的な規制とインセンティブです。低VOC樹脂やバイオベース樹脂は、業界がエコロジカル・フットプリントを削減するために様々な環境規制を遵守しようとしていることから、人気を集めています。
• 産業とインフラプロジェクトの成長：産業とインフラプロジェクトの拡大により、材料の性能を高め寿命を延ばす含浸樹脂の需要が増加しています。建築や製造プロセスの加速に伴い、高品位樹脂ソリューションへのニーズが高まっています。
• 技術の統合：センサーなどのスマート技術を樹脂に組み込むことが、技術革新と市場成長を促進します。スマート樹脂は、リアルタイムでのモニタリングと性能の最適化を可能にし、高度なソリューションを求める業界にアピールします。

含浸樹脂市場の課題は以下の通りです：

• 高い開発コスト：高度な含浸樹脂の開発には、研究開発に多額の投資が必要です。高コストは中小企業の足かせとなり、新技術の参入を遅らせ、結果的に市場成長の妨げとなります。
• 複雑な規制対応：異なる地域間の規制要件を乗り越えることは困難です。樹脂製品を開発・市場開拓する際に、様々な環境・安全基準を遵守することは、複雑さと費用を増大させる。
• 価格圧力と市場競争：競争の激化は、好調な含浸樹脂市場に水を差す可能性があります。競争力と収益性を維持するためには、企業は技術革新とコスト管理のバランスを取る必要があります。

技術進歩や規制支援といった市場促進要因が含浸樹脂市場の成長に寄与する一方で、高い開発コストや複雑な規制が市場促進要因・課題となります。これらの要因に対処することは、機会を活用し、市場の継続的な成長を確保するために不可欠です。

目次

第1章 エグゼクティブサマリー

第2章 世界の含浸樹脂市場：市場力学

• イントロダクション、背景、分類
• サプライチェーン
• 業界の促進要因と課題

第3章 市場動向と予測分析 (2019年～2031年)

• マクロ経済動向 (2019～2024年) と予測 (2025～2031年)
• 世界の含浸樹脂市場の動向 (2019～2024年) と予測 (2025～2031年)
• 世界の含浸樹脂市場：種類別
  • 無溶剤型
  • 溶剤系
  • その他
• 世界の含浸樹脂市場：用途別
  • モーター・発電機
  • 家電製品
  • 変圧器
  • 自動車部品
  • その他

第4章 地域別の市場動向と予測分析 (2019年～2031年)

• 世界の含浸樹脂市場：地域別
• 北米の含浸樹脂市場
• 欧州の含浸樹脂市場
• アジア太平洋の含浸樹脂市場
• その他地域の含浸樹脂市場

第5章 競合分析

• 製品ポートフォリオ分析
• 運用統合
• ポーターのファイブフォース分析

第6章 成長機会と戦略分析

• 成長機会分析
  • 世界の含浸樹脂市場の成長機会：種類別
  • 世界の含浸樹脂市場の成長機会：用途別
  • 世界の含浸樹脂市場の成長機会：地域別
• 世界の含浸樹脂市場の新たな動向
• 戦略的分析
  • 新製品の開発
  • 世界の含浸樹脂市場の生産能力拡大
  • 世界の含浸樹脂市場における企業合併・買収 (M&A)、合弁事業
  • 認証とライセンシング

第7章 主要企業のプロファイル

• Elantas
• Axalta Coating Systems
• Von Roll Holdings
• Henkel
• Kyocera

The future of the global impregnating resins market looks promising with opportunities in the motors & generators, home appliances, transformers, and automotive components markets. The global impregnating resins market is expected to reach an estimated $3 billion by 2031 with a CAGR of 6.6% from 2025 to 2031. The major drivers for this market are the increasing demand from the electrical industry, particularly for applications like transformers used to distribute electricity and rotors and motors in car powertrain systems, and the need for high output, the extended lifespan of motors and generators, and the introduction of cutting-edge machinery.

• Lucintel forecasts that, within the type category, solventless will remain the larger segment over the forecast period due to outstanding stability, strong reactivity, room temperature impregnation, and flexible processability.
• Within this market, the application category of automotive components is expected to witness the highest growth due to increasing demand for electric vehicles.
• In terms of regions, APAC is expected to witness the highest growth over the forecast period due to electrifying rural areas in developing nations.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Impregnating Resins Market

The impregnating resins market is in its development stage, and several emerging trends in technology, sustainability, and applications have been recorded. These trends shape the landscape of the market and influence product development.

• Bio-Based Resins: Bio-based resins represent a growing interest in resin impregnation based on renewable raw materials. The objective of replacing traditional resins is to achieve a lesser environmental impact and reduce dependence on fossil sources. This trend is increasingly under pressure due to regulatory rules and consumer demand for greener products, providing an ecological alternative without compromising performance.
• High-Performance Formulation: High-performance formulation involves the development of advanced resin formulations with high resistance to heat, electricity, and chemicals. The demands within key markets such as automotive, aerospace, and electronics are being met through innovations that enhance the reliability and service life of the products.
• Low-VOC and Eco-Friendly Impregnating Resins: The increasing demand for low-VOC and eco-friendly impregnating resins is a response to rising environmental regulations and sustainability considerations. Such impregnating resins help reduce harmful emissions, improving indoor air quality and minimizing harm to the environment and human health.
• Curing Technologies: Curing technologies are continuously developing, such as UV curing and thermal curing, improving the efficiency and speed of resin processing. These technologies allow faster production cycles, ensuring better control of resin properties and improving manufacturing efficiency for the production of high-performance products.
• Smart Resins with Embedded Sensors: The trend for smart technologies to integrate into impregnating resins is expressed through various integrated sensors that offer real-time monitoring of products. These smart resins will provide valuable data about material performance and condition, enabling proactive maintenance and optimization of the functionality of end-use products.

Emerging trends in the impregnating resin market show a movement toward the use of advanced, sustainable, and high-performance solutions. This drives the need for innovation and the accomplishment of regulatory requirements to meet the needs of specific industries, reshaping the market and expanding applications of impregnating resins.

Recent Developments in the Impregnating Resins Market

Recent developments within the impregnating resin market emphasize performance improvement, sustainability, and adaptability. These innovations represent technological advancements and increased demands across diversified industrial applications, dictating the market's prospects and potential.

• Improving Performance of Epoxy Resins: New formulations in epoxy resins provide improved thermal stability and electrical insulation. These improvements are vital in enhancing the performance of impregnating resins in critical applications such as electronics and automotive components, where durability and reliability are major concerns.
• Introduction of Eco-Friendly Formulations: In line with growing environmentally friendly requirements, resin formulations are being made in an eco-friendly manner. The introduction of low-VOC and bio-based formulations reduces the ecological footprint of many industrial processes and products.
• Development of High-Performance Polyurethane Resins: Improvements in polyurethane resins have enhanced their mechanical properties and resistance to chemical attack. Applications of such resins in high-performance uses within the motor and industrial sectors provide enhanced protection and resistance to wear.
• Curing Technologies: Advances in curing technologies, such as UV and microwave curing, are improving the efficiency and quality of resin processing. These technologies replace older, more labor-intensive methods, allowing faster production times and greater control over resin properties.
• The integration of smart technologies into impregnating resins, such as sensors for real-time monitoring, is also advancing. These smart resins capture valuable data about material performance and condition, facilitating improved maintenance and performance optimization.

Key events taking place in the impregnating resin market include improved performance, the ecological greening of formulations, and process technology improvements. Innovations of this nature cater to the requirements of industries, improving product quality and enabling application development, which drives the market's future.

Strategic Growth Opportunities for Impregnating Resins Market

Strategic growth opportunities are emerging in the impregnating resin market through key applications driven by technology and changing industrial requirements. These opportunities are significant for enhancing market presence and driving innovation in resin solutions.

• Electronics Industry: The electronics industry shows significant potential for impregnating resins, especially in applications requiring superior electrical insulation and thermal stability. Modern and integrated electronics increasingly demand performance-enhancing resins that enable high reliability.
• Automotive Industry: This industry will find immense applications for resin impregnation in parts requiring toughness, durability, and resistance to adverse conditions. Improvements in resin formulation can lead to the creation of high-performance automotive parts, driving market growth.
• Applications of Renewable Energy: The development of wind and solar power projects has increased the demand for impregnating resins that provide protection and performance in extreme conditions. Resins that enhance the durability of components in energy applications can enter this growing market.
• Infrastructure Development: Infrastructural projects such as bridges and buildings are gaining momentum, creating opportunities for impregnated resins. It is anticipated that construction applications will increase demand for impregnated resins, enhancing durability and performance thereby driving market growth.
• Consumer Goods: Besides appliances and electronics, the consumer goods sector represents another lucrative area for resin impregnation, offering improved aesthetic and functional properties. Advanced resin solutions can thus meet the high quality increasingly required by the consumer sector.

Technological advancements across various applications, from electronics to renewable energy, include strategic growth opportunities in the impregnating resins market. Capturing these opportunities will facilitate innovation and lead to market development by offering new products, ensuring overall growth.

Impregnating Resins Market Driver and Challenges

The impregnating resin market will face drivers and challenges related to technology, economics, and regulations. These factors will shape market trends, growth possibilities, and the development of innovative resin solutions.

The factors driving the impregnating resins market include:

• Technological Improvement: Innovations in resin technologies, such as improved formulations and curing techniques, propel the market forward. These advancements result in better performance and application versatility, meeting growing demands in industries such as electronics and automotive.
• Increasing Demand for High-Performance Materials: The growing demand for high-performance materials from industries such as aerospace, automotive, and renewable energy drives the need for advanced impregnating resins. High-performance resins provide superior durability, insulation, and protection to meet industrial needs.
• Sustainability Regulatory Support: Supportive regulations and incentives for sustainability are major driving forces for adopting eco-friendly resins. Low-VOC and bio-based resins are gaining popularity as the industry seeks to comply with various environmental regulations to reduce its ecological footprint.
• Growth in Industrial and Infrastructure Projects: The expansion of industry and infrastructure projects increases the demand for impregnating resins that enhance performance and extend the life of materials. With the acceleration of building and manufacturing processes, there is a greater need for high-grade resin solutions.
• Integrating Technologies: Integrating smart technologies into resins, such as sensors, drives innovation and market growth. Smart resins ensure real-time monitoring and optimization of performance, appealing to industries seeking advanced solutions.

Challenges in the impregnating resins market include:

• High Development Costs: Developing advanced impregnating resins requires significant investment in research and development. High costs deter smaller companies and may delay the entry of new technologies, ultimately hindering market growth.
• Complex Regulatory Compliance: Navigating regulatory requirements across different regions can be challenging. Compliance with various environmental and safety standards while developing and marketing resin products adds complexity and expense.
• Price Pressures and Market Competition: Intense competition may dampen this otherwise booming market for impregnating resins. To remain competitive and profitable, companies must balance innovation with cost control.

Drivers such as technological advancement and regulatory support contribute to growth in the impregnating resins market, while high development costs and regulatory complexities pose challenges. Addressing these factors is essential for leveraging opportunities and ensuring continuous market growth.

List of Impregnating Resins Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. through these strategies impregnating resins, companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the impregnating resins companies profiled in this report include-

• Elantas
• Axalta Coating Systems
• Von Roll Holdings
• Henkel
• Kyocera

Impregnating Resins by Segment

The study includes a forecast for the global impregnating resins market by type, application, and region.

Impregnating Resins Market by Type [Analysis by Value from 2019 to 2031]:

• Solventless
• Solvent Based
• Others

Impregnating Resins Market by Application [Analysis by Value from 2019 to 2031]:

• Motors & Generators
• Home Appliances
• Transformers
• Automotive Components
• Others

Impregnating Resins Market by Region [Analysis by Value from 2019 to 2031]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Impregnating Resins Market

The impregnating resin market is experiencing remarkable development due to rapid technological innovations, increased demand for high-performance materials, and changing industrial applications. Various developments are occurring in significant global markets.

• US: The US-impregnating resins market is advancing by focusing on high-performance epoxy and polyurethane resins. Improvements in formulations for better thermal and electrical insulation are driven by demand from the automotive and electronics sectors. Increased interest in electric vehicle manufacturing and renewable energy applications has partly fueled this interest.
• China: The Chinese impregnating resins market is showing significant growth, driven by the country's expanding industrial base and major infrastructure projects. Recent developments in resin formulations include greatly improved durability and environmental resistance. Current pressures for greener technologies have led to the development of low-VOC and eco-friendly resins.
• Germany: Germany's impregnating resin market is characterized by its strong emphasis on sustainability and high-tech applications. Innovations include the development of bio-based and recyclable resins to comply with environmental regulations. Key growth drivers come from industries such as automotive and aerospace, primarily with resins that guarantee top performance and adhere to high-quality standards.
• India: The demand for impregnating resins has rapidly increased due to growing industrial activities and infrastructure development within India. Key developments include the creation of economical resin solutions for applications such as electrical insulation and automotive components. Improvements in product performance will be pursued without compromising pricing to meet rising domestic demand.
• Japan: Japan's impregnating resins market is evolving toward high-performance and specialty resins. Recent developments involve processing resins with superior thermal stability and chemical resistance, driven by the electronics and energy-related sectors. Advanced resin technologies will be increasingly utilized as the market seeks high-quality and precision requirements.

Features of the Global Impregnating Resins Market

Market Size Estimates: Impregnating resins market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.

Segmentation Analysis: Impregnating resins market size by type, application, and region in terms of value ($B).

Regional Analysis: Impregnating resins market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different types, applications, and regions for the impregnating resins market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the impregnating resins market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the impregnating resins market by type (solventless, solvent based, and others), application (motors & generators, home appliances, transformers, automotive components, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Impregnating Resins Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2019 to 2031

• 3.1. Macroeconomic Trends (2019-2024) and Forecast (2025-2031)
• 3.2. Global Impregnating Resins Market Trends (2019-2024) and Forecast (2025-2031)
• 3.3: Global Impregnating Resins Market by Type
  • 3.3.1: Solventless
  • 3.3.2: Solvent Based
  • 3.3.3: Others
• 3.4: Global Impregnating Resins Market by Application
  • 3.4.1: Motors & Generators
  • 3.4.2: Home Appliances
  • 3.4.3: Transformers
  • 3.4.4: Automotive Components
  • 3.4.5: Others

4. Market Trends and Forecast Analysis by Region from 2019 to 2031

• 4.1: Global Impregnating Resins Market by Region
• 4.2: North American Impregnating Resins Market
  • 4.2.1: North American Impregnating Resins Market by Type: Solventless, Solvent Based, and Others
  • 4.2.2: North American Impregnating Resins Market by Application: Motors & Generators, Home Appliances, Transformers, Automotive Components, and Others
• 4.3: European Impregnating Resins Market
  • 4.3.1: European Impregnating Resins Market by Type: Solventless, Solvent Based, and Others
  • 4.3.2: European Impregnating Resins Market by Application: Motors & Generators, Home Appliances, Transformers, Automotive Components, and Others
• 4.4: APAC Impregnating Resins Market
  • 4.4.1: APAC Impregnating Resins Market by Type: Solventless, Solvent Based, and Others
  • 4.4.2: APAC Impregnating Resins Market by Application: Motors & Generators, Home Appliances, Transformers, Automotive Components, and Others
• 4.5: ROW Impregnating Resins Market
  • 4.5.1: ROW Impregnating Resins Market by Type: Solventless, Solvent Based, and Others
  • 4.5.2: ROW Impregnating Resins Market by Application: Motors & Generators, Home Appliances, Transformers, Automotive Components, and Others

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Impregnating Resins Market by Type
  • 6.1.2: Growth Opportunities for the Global Impregnating Resins Market by Application
  • 6.1.3: Growth Opportunities for the Global Impregnating Resins Market by Region
• 6.2: Emerging Trends in the Global Impregnating Resins Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Impregnating Resins Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Impregnating Resins Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Elantas
• 7.2: Axalta Coating Systems
• 7.3: Von Roll Holdings
• 7.4: Henkel
• 7.5: Kyocera