AIN DBC基板市場レポート：2030年までの動向、予測、競合分析

AIN DBC基板の動向と予測

世界のAIN DBC基板市場の将来は、IGBTパワーデバイス、自動車、航空宇宙市場での機会により有望視されています。世界のAIN DBC基板市場は、2024～2030年にかけて13.5%のCAGRで成長すると予想されます。この市場の主要促進要因は、パワーエレクトロニクス用途におけるAIN DBC基板の需要の増加と、AIN DBC基板の小型化です。

• Lucintelの予測では、タイプカテゴリーでは、汎用性とコスト効率の高さから、予測期間中もAIN 1.0mmがより大きなセグメントであり続けます。
• 用途別では、IGBT（絶縁ゲート型バイポーラトランジスタ）がモータードライブ、電源、インバーターなどのパワーエレクトロニクス・用途に広く採用されていることから、IGBTパワーデバイスが引き続き最大セグメントとなります。
• 地域別では、中国、韓国、台湾のエレクトロニクス製造業の急成長により、アジア太平洋が予測期間中最大の地域であり続けると考えられます。

AIN DBC基板市場の戦略的成長機会

技術開拓、産業ニーズの変化、新しい用途は、AIN DBC基板市場に戦略的成長機会を与える原動力の一部です。企業はこうした機会を活用することで、市場でより大きな存在感を示すことができると考えられます。

• 自動車用途への参入：自動車エレクトロニクスのニーズは増加の一途をたどっており、採用される高性能電子部品にさらなる進歩の道が開かれるため、自動車セグメントは事業拡大の好機となります。自動車セグメントでは、AIN DBC基板は非常に重要であり、基板技術のさらなる進歩は、電気自動車や自律走行車のニーズへの対応に役立つと考えられます。
• RF/マイクロ波基板の開発：高周波用途のなかでも、RF/マイクロ波用途のAIN DBC基板の開発が成長セグメントとなります。高性能基板は、その使用により、通信システムの信号の完全性と信頼性が向上するため、非常に求められています。
• 再生可能エネルギー用途の重視：信頼性の高い性能を持つ基板への需要の高まりにより、ソーラーインバータや風力タービンといった再生可能エネルギーシステムへの用途セグメントが広がっています。AIN DBC基板は、パワーエレクトロニクスの性能と信頼性を向上させることで貢献し、これらのシステムの成長要件を満たすことで、再生可能エネルギーの成長機会を開きます。
• 環境に優しい基板の開発：AIN DBC基板のスマート包装ソリューションの成長機会は、センサーやIoT技術との統合を想定している可能性があります。このような場合、スマート基板はさらに一歩進んで、性能モニタリングの改善といった追加機能を提供することになり、スマートエレクトロニクスやIoTの動向と一致することになります。
• 新興市場への参入：先端基板市場の成長は、エレクトロニクスや自動車産業で需要が急拡大している地域の新興市場において、非常に大きなものとなると考えられます。企業は、アジア太平洋やラテンアメリカような地域での需要拡大を対象に、先端基板需要の増加を活用して市場でのプレゼンスを拡大することができます。

自動車用用途、高周波基板、再生可能エネルギー、スマート包装、新興国市場などの成長機会を戦略的に開拓することで、市場拡大と開拓の余地が生まれます。こうした機会は、産業内で起きている動向に沿ったものであり、AIN DBC基板市場を後押しします。

AIN DBC基板市場促進要因・課題

AIN DBC基板市場の各セグメントの成長には、さまざまな促進要因・課題がつきまとう。技術の進歩、経済的要因、規制要件への適合は、市場力学を決定する他のいくつかの重要な要因です。

AIN DBC基板市場を牽引する要因は以下の通りです。

• 高性能エレクトロニクスの利用の高まり：先端電子デバイスの優れた性能に対する需要が、先端AIN DBC基板の需要を牽引しています。パワーエレクトロニクス、自動車システム、通信において、高い熱伝導性と信頼性を実現する基板が求められています。
• 材料科学の進歩：材料科学で行われている製造技術の中でも、新しい配合がAIN DBC基板の能力を向上させています。これらにより、ハイパワーと高周波用途に対する需要の高まりに対応する性能が向上しています。
• 成長するエレクトロニクスと自動車産業：エレクトロニクス産業と自動車産業の成長による需要の増加が、AIN DBC基板の需要を促進しているからです。言い換えれば、これらの産業が成長し変化するにつれて、先進的熱管理と機械的特性を備えた基板へのニーズが高まっている
• エネルギー効率への関心の高まり：電子機器や自動車用途では、エネルギー効率と持続可能性への関心が高まっています。AIN DBC基板は、持続可能性と規制要件という世界の目標に向けた重要な要素であるエネルギー効率と性能の向上に貢献します。
• 基板設計における技術革新：市場成長の原動力となる技術的進歩の中でも、先進的接合・成膜技術は、さまざまな産業におけるニーズの変化に対応するため、基板の性能、信頼性、製造効率を高める上で重要な役割を果たしています。

AIN DBC基板市場課題は以下の通りです。

• 高い製造コスト：先進的AIN DBC基板は、その価格を非常に高くする製造間接費に直面しており、それゆえ市場の値ごろ感に影響を及ぼしています。メーカーによるコストと性能のバランスは、競合を確保し、品質基準に対する産業の要求を満たすために不可欠です。
• 規制とコンプライアンス要件：規制・コンプライアンス要件の複雑さは、AIN DBC基板市場の成長を妨げます。基材は、産業標準や環境規制を満たすために膨大な資源と労力を必要とし、こうした問題は市場への参入と開拓を妨げます。
• 代替技術との競合：市場は、同等またはそれ以上の性能を提供する代替技術や代替材料との競争も受ける。こうした競合技術は市場シェアや価格戦略に影響を及ぼすため、継続的な技術革新と差別化が求められます。

高性能エレクトロニクスに対する需要の高まり、材料科学の進化、産業の成長、エネルギー効率の重視、技術の登場は、AIN DBC基板市場の主要促進要因として作用しています。生産コストの高さ、規制規範、競合への脅威は、市場が直面する課題のいくつかです。これらの要因に取り組むことが、市場のさらなる成長と成功に不可欠です。

目次

第1章 エグゼクティブサマリー

第2章 世界のAIN DBC基板市場：市場力学

• イントロダクション、背景、分類
• サプライチェーン
• 産業の促進要因と課題

第3章 2018～2030年の市場動向と予測分析

• マクロ経済動向（2018～2023年）と予測（2024～2030年）
• 世界のAIN DBC基板市場の動向（2018～2023年）と予測（2024～2030年）
• AIN DBC基板の世界市場：タイプ別
  • 0.635mm
  • 1.0mm
• AIN DBC基板の世界市場：用途別
  • IGBTパワーデバイス
  • 自動車
  • 航空宇宙
  • その他

第4章 2018～2030年の地域別市場動向と予測分析

• 地域別AIN DBC基板の世界市場
• 北米AIN DBC基板市場
• 欧州AIN DBC基板市場
• アジア太平洋 AIN DBC基板市場
• その他地域 AIN DBC基板市場

第5章 競合分析

• 製品ポートフォリオ分析
• 運用統合
• ポーターのファイブフォース分析

第6章 成長機会と戦略分析

• 成長機会分析
  • 世界のAIN DBC基板市場における成長機会：タイプ別
  • 世界のAIN DBC基板市場の成長機会：用途別
  • AIN DBC基板市場の成長機会：地域別
• 世界のAIN DBC基板市場の新たな動向
• 戦略分析
  • 新製品開発
  • 世界のAIN DBC基板市場の生産能力拡大
  • 世界のAIN DBC基板市場における合併、買収、合弁事業
  • 認証とライセンシング

第7章 主要企業の企業プロファイル

• Rogers/Curamik
• KCC
• Ferrotec
• Nanjing Zhongjiang

AIN DBC Substrate Trends and Forecast

The future of the global AIN DBC substrate market looks promising with opportunities in the IGBT power device, automotive, and aerospace markets. The global AIN DBC substrate market is expected to grow with a CAGR of 13.5% from 2024 to 2030. The major drivers for this market are the increasing demand for AIN DBC substrates in power electronics applications and the miniaturization of AIN DBC substrates.

• Lucintel forecasts that, within the type category, AIN 1.0mm will remain a larger segment over the forecast period due to its versatility and cost-effectiveness.
• Within the application category, IGBT power devices will remain the largest segment due to the widespread adoption of IGBTs (insulated-gate bipolar transistors) in power electronics applications, such as motor drives, power supplies, and inverters.
• In terms of regions, APAC will remain the largest region over the forecast period due to the rapid growth of the electronics manufacturing industry in China, South Korea, and Taiwan.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the AIN DBC Substrate Market

The modern-day has been trending towards transformation in the AIN DBC substrate market, influenced by rapid technological advancement, increasing demand for high-performance electronics, and changing industrial requirements. It transforms the market capabilities of substrates, resulting in higher performance and diversified application areas.

• Advances in Thermal Management: There is an increasing demand for and development of AIN DBC substrates with improved thermal management properties: substrates manufactured with higher thermal conductivity, better heat dissipation properties, and specific thermal management features. These features will find applications in high-power electronic devices or other applications where effective thermal management is crucial to ensure reliability and performance.
• Integration with Advanced Packaging Technologies: Increasingly, AIN DBC substrates have been integrated with SiP and 3D advanced packaging. Substrate functionality is enhanced by enabling electronic assembly to be compact and efficient, thereby meeting ever-increasing demands for miniaturized and high-performance electronic devices.
• Emphasis on High-Power and High-Frequency Applications: This has resulted in recent years in an increased emphasis on the development of AIN DBC substrates for use in high-power and high-frequency applications. All this is because the fact is that substrates used in power electronics, RF systems, and automotive electronics should be reliable. Improved substrate characteristics mean there is much support for such performance and reliability in the most demanding applications.
• Adoption of Eco-Friendly Manufacturing Processes: This is an explanation of why the AIN DBC substrate market is facing an increasing interest in manufacturing processes that are more eco-friendly and sustainable. These companies are seeking green production methods and materials that contribute to less degradation of the environment, besides the fact that most of their regulatory standards do demand the same: environmental friendliness. The trend exhibits a significant cadence towards the aims of global sustainability and answers to the rising concerns over environmental degradation.
• Penetration into Emerging Economies: Due to this, the AIN DBC substrate market is extending its frontiers for the emergence of growing electronics and automotive industries. Several companies are targeting regions like Asia-Pacific and Latin America to leverage rising demand and investment in technology. In this way, it allows newer opportunities for growth and diversification of the marketplace.

The above trends are currently emerging in the AIN DBC substrate market, including improvements in thermal management, integration with advanced packaging technologies, a focus on high-power applications, the use of eco-friendly processes, and further penetration into emerging markets. Such trends enhance substrate performance, enable new applications, and secure further market growth.

Recent Developments in the AIN DBC Substrate Market

Various developments in recent years in the market for the AIN DBC substrate have marked significant improvements in material science, manufacturing technology, and its market. Performance, application, and growth paths taken in the advanced technologies of AIN DBC substrates are usually influenced by such three factors.

• Advanced Manufacturing Techniques: Innovations in manufacturing techniques, such as precision bonding and deposition methods, are improving substrate quality and performance. This enables the fabrication of substrates with superior mechanical strength and performance, along with improved electrical properties to meet the growing demands of high power and frequency applications.
• Expansion of Manufacturing Facilities: This is attributed to the rise in demand for products in the market, whereby different companies have involved themselves in expanding their production facilities by adding equipment and technologies that are used to develop and increase efficient lines of production. This expansion supports the rising needs that emanate from various industries, which include automotive, electronics, and renewable energy.
• Eco-Friendly Substrate Development: There is an increasing trend in developing eco-friendly AIN DBC substrates. This includes green materials with environmentally friendly manufacturing processes. The transition to greener substrates will be part of the general global trend for sustainability and a response to increasingly strict regulations and demanding consumers.
• Collaboration with Global Technology Providers: Collaborations with global technology providers advance AIN DBC substrate technology. This includes partnerships and joint ventures that have their operational focus on expertise and resource utilization towards innovating solutions and enhancing substrate performances. These help drive technological advancements and market growth.

Recent development involves improved material development, advanced manufacturing techniques, expansion of facilities, eco-friendly solutions, and worldwide collaboration. These are the factors that are helping in the improvement of substrate performance, the growth of the market, and satisfying the emerging need for industry segments.

Strategic Growth Opportunities for AIN DBC Substrate Market

Technological development, changes in industry needs, and newer applications are some of the driving forces that give strategic opportunities for growth in the AIN DBC substrate market. Companies may leverage these opportunities to arrive at a more significant presence in the market.

• Entry into Automotive Applications: The automotive sector presents a good avenue for business expansion since the need for automotive electronics is at an increase and opens avenues for more advances in high-performance electronic components that are employed. In automotive, AIN DBC substrates will be of immense importance, and further advancement in the technology of substrates would help in responding to the needs of electric and autonomous vehicles.
• Development of RF/Microwave Substrates: The development of AIN DBC substrates for use in RF and microwave applications, among other high-frequency uses, presents a ground for growth. High-performance substrates are highly sought after, since with their use, there is improvement in the integrity and reliability of the signal in communications systems-a way to keep up with the growing demand for advanced electronic devices.
• Emphasis on Renewable Energy Applications: Growing demand for substrates with reliable performance opens an application area in solar inverters and wind turbines, renewable energy systems. AIN DBC substrates contribute by enhancing power electronics performance and reliability to meet the growing requirements of these systems, thus opening opportunities for growth in renewable energy.
• Development of Eco-Friendly Substrates: The opportunities for growth in smart packaging solutions for AIN DBC substrates may contemplate integration with sensors and IoT technology. In such cases, smart substrates would go a step further in providing additional functionalities-improved performance monitoring-which would fall in line with trends in smart electronics and IoT.
• Entry into Emerging Markets: The growth of the advanced substrate market would be huge in the emerging markets of regions that are exhibiting fast growth in demand in the electronics and automotive industries. Companies can target the growing demand in geographies like Asia-Pacific and Latin America to leverage the increasing demand for advanced substrates to expand their market presence.

The strategic opening of growth opportunities in automotive applications, high-frequency substrates, renewable energy, smart packaging, and emerging markets creates space for market expansion and development. These opportunities are in line with the trend occurring within the industry and help boost the AIN DBC substrate market.

AIN DBC Substrate Market Driver and Challenges

A range of drivers and challenges surrounds the growth of each segment in the AIN DBC substrate market. Technological advancements, economic factors, and meeting regulatory requirements are a few other key factors that determine market dynamics.

The factors responsible for driving the ain DBC substrate market include:

• Rising Utilization of High-Performance Electronics: The demand for superior performance in advanced electronic devices drives the demand for advanced AIN DBC substrates. There is a need for substrates that allow high thermal conductivity and reliability in power electronics, automotive systems, and telecommunications.
• Advancements in Material Science: New formulation, among other manufacturing techniques carried out in material sciences, is improving the capability of AIN DBC substrates. All these improve performance to meet the growing demands for high-power and high-frequency applications.
• Growing Electronics and Automotive Industries: This is because increasing demand due to the growth of the electronics and automotive industries fuels demand for AIN DBC substrates. In other words, as these industries grow and change, there is a greater need for substrates with advanced thermal management and mechanical properties.
• Increased Interest in Energy Efficiency: There is an increased focus on energy efficiency and sustainability for electronic and automotive applications. AIN DBC substrates contribute to improvements in energy efficiency and performance key factors toward global goals of sustainability and regulatory requirements.
• Technological Innovations in Substrate Design: Among the technological advances that drive the growth of the market, advanced bonding and deposition techniques play a prominent role in boosting substrate performance, reliability, and manufacturing efficiency to meet changing needs across various industries.

Challenges in the AIN DBC substrate market are:

• High Production Costs: Advanced AIN DBC substrates face manufacturing overheads that raise their prices very high, hence affecting market affordability. The balancing of cost and performance by a manufacturer is indispensable to ensure competitiveness, and meeting industrial demands for standards of quality.
• Regulatory and Compliance Requirements: Complexity in regulatory and compliance requirements counteracts the growth of the AIN DBC substrate market. Substrates require immense resources and efforts to be qualified enough to meet industry standards and environmental regulations, and such issues counteract entry and the development of markets.
• Competition from Alternative Technologies: The market also receives competition from alternative technologies and materials that offer equivalent or even better performance. Such competing technologies are going to have their influence on market share and pricing strategy, therefore demanding continuous innovation and differentiation.

Rising demand for high-performance electronics, the evolution of material science, the growth of industries, the emphasis on energy efficiency, and the advent of technologies are acting as a key driver for AIN DBC substrate markets. The high cost of production, regulatory norms, and threat to competition are a few of the challenges facing the market. Engaging in the said factors will be pivotal to further growth and market success.

List of AIN DBC Substrate Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies AIN DBC substrate companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the AIN DBC substrate companies profiled in this report include-

• Rogers/Curamik
• KCC
• Ferrotec
• Nanjing Zhongjiang

AIN DBC Substrate by Segment

The study includes a forecast for the global AIN DBC substrate by type, application, and region.

AIN DBC Substrate Market by Type [Analysis by Value from 2018 to 2030]:

• AlN 0.635mm
• AlN 1.0mm

AIN DBC Substrate Market by Application [Analysis by Value from 2018 to 2030]:

• IGBT Power Device
• Automotive
• Aerospace
• Others

AIN DBC Substrate Market by Region [Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the AIN DBC Substrate Market

The AIN DBC substrate market is recording serious development at the moment, and such a tendency can be explained by increasing demand both for high-performance electronic gadgets and effective solutions for thermal management. Key movements within the US, China, Germany, India, and Japan evidence the latest developments in the field of material science, technological approaches to production, and application areas. Such development further refines the performance and new capabilities of AIN DBC substrates that will find their important implementations in power electronics, automotive, and industrial machinery.

• US: The AIN DBC substrate market in the US has gained significant momentum in recent times owing to the advancement of fabrication technology and increased focus on high-reliability applications. Many firms have invested millions of dollars in establishing the latest production facility to enhance the quality and performance of substrates. In addition, there is an emerging interest in the fabrication of substrates with improved thermal conductivity and mechanical strength to cater to the needs of high-power electronic devices for automotive and aerospace applications.
• China: Electronics manufacturing and value creation in technological innovation have set a rapid growth path for the AIN DBC substrate market in China. New production lines are being set up, while there is also collaboration with international technology providers for licensed production. In addition, Chinese manufacturers are scaling up their production capacity by enhancing substrate performance to meet the demand in automotive and consumer electronics and further optimizing cost efficiency in the production processes.
• Germany: High-value manufacturing and good material quality are the major drivers that shape developments in the AIN DBC substrate market in Germany. German companies are executing substrate deposition techniques, especially with newer technologies in bonding, to offer better thermal and electrical performances. The development of substrates for applications related to high frequency and high power is also a point of interest, reflecting Germany's strong leadership in the automotive and industrial technology sectors.
• India: India is showing growth in the demand for Indian AIN DBC substrate, majorly due to demand from the automotive and electronics industries. Some key recent developments in the country involve increasing local production capacities and even partnerships with international players aimed at upgrading substrate technologies. Indian manufacturers work towards enhancing efficiency in production and cost-effectiveness while meeting the growing requirement for reliable and high-performance substrates in power electronics and renewable energy applications.
• Japan: Over the years, the AIN DBC substrate market has continued to develop in Japan, along with innovations in substrate technology and materials. Some of the latest innovations involved substrates with high thermal conductivity and superior bonding techniques that meet the demands of the latest advanced electronic devices. Encouraged by the nation's strong emphasis on technological innovation and precision engineering, Japanese companies are also testing new applications in consumer electronics and industries.

Features of the AIN DBC Substrate Market

Market Size Estimates: AIN DBC substrate market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: AIN DBC substrate market size by various segments, such as by type, application, and region in terms of value ($B).

Regional Analysis: AIN DBC substrate market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different types, applications, and regions for the AIN DBC substrate market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the AIN DBC substrate market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the AIN DBC substrate market by type (AIN 0.635mm and AIN 1.0mm), application (IGBT power device, automotive, aerospace, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global AIN DBC Substrate Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2018 to 2030

• 3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
• 3.2. Global AIN DBC Substrate Market Trends (2018-2023) and Forecast (2024-2030)
• 3.3: Global AIN DBC Substrate Market by Type
  • 3.3.1: AIN 0.635mm
  • 3.3.2: AIN 1.0mm
• 3.4: Global AIN DBC Substrate Market by Application
  • 3.4.1: IGBT Power Device
  • 3.4.2: Automotive
  • 3.4.3: Aerospace
  • 3.4.4: Others

4. Market Trends and Forecast Analysis by Region from 2018 to 2030

• 4.1: Global AIN DBC Substrate Market by Region
• 4.2: North American AIN DBC Substrate Market
  • 4.2.1: North American Market by Type: AIN 0.635mm and AIN 1.0mm
  • 4.2.2: North American Market by Application: IGBT Power Device, Automotive, Aerospace, and Others
• 4.3: European AIN DBC Substrate Market
  • 4.3.1: European Market by Type: AIN 0.635mm and AIN 1.0mm
  • 4.3.2: European Market by Application: IGBT Power Device, Automotive, Aerospace, and Others
• 4.4: APAC AIN DBC Substrate Market
  • 4.4.1: APAC Market by Type: AIN 0.635mm and AIN 1.0mm
  • 4.4.2: APAC Market by Application: IGBT Power Device, Automotive, Aerospace, and Others
• 4.5: ROW AIN DBC Substrate Market
  • 4.5.1: ROW Market by Type: AIN 0.635mm and AIN 1.0mm
  • 4.5.2: ROW Market by Application: IGBT Power Device, Automotive, Aerospace, and Others

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global AIN DBC Substrate Market by Type
  • 6.1.2: Growth Opportunities for the Global AIN DBC Substrate Market by Application
  • 6.1.3: Growth Opportunities for the Global AIN DBC Substrate Market by Region
• 6.2: Emerging Trends in the Global AIN DBC Substrate Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global AIN DBC Substrate Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global AIN DBC Substrate Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Rogers/Curamik
• 7.2: KCC
• 7.3: Ferrotec
• 7.4: Nanjing Zhongjiang