シリカ系マット剤の世界市場規模：技術別、用途別、地域別展望と予測

シリカ系マット剤の市場規模と予測

シリカ系マット剤市場規模は、2024年に4億8,803万米ドルと評価され、2026～2032年の予測期間中にCAGR 4.40%で成長し、2032年には6億8,873万米ドルに達すると予測されています。

保護塗料は従来型塗料よりも耐久性があり、透明度が高いため、その需要がこの上昇を牽引しています。保護塗料は顔料エクステンダーとして頻繁に使用され、塗料が表面をより均一に覆うことを可能にし、毎回の塗料使用量を少なくします。産業はまた、つや消し仕上げの表面や自動車の需要の急増によっても牽引されています。この調査レポートは、シリカ系マット剤の世界市場を総合的に評価・分析しています。主要セグメント、動向、市場促進要因、市場抑制要因、競合情勢、市場で重要な役割を果たしている要因などを包括的に分析しています。

シリカ系マット剤の世界市場促進要因

シリカ系マット剤市場の市場促進要因は、様々な要因によって影響を受ける可能性があります。これらには以下が含まれます。

エンドユーザー産業の需要拡大：シリカ系マット剤は、表面につや消しやサテンの外観を与えるため、塗料やコーティング剤、インク、接着剤、プラスチックなど様々な産業で広く利用されています。シリカ系マット剤のニーズは、家具、包装、建築、自動車産業において、美観に優れ、優れた表面処理を求める需要が拡大していることが背景にあります。

環境規制への関心の高まり：シリカ系マット剤には、揮発性有機化合物（VOC）の排出が少ない、毒性がない、環境保護庁（EPA）やREACH（化学品の登録、評価、認可、制限）が定める規則に適合しているなどの利点があります。エコフレンドリーマット剤の使用は、環境問題や法律に関する一般市民の知識の高まりによって奨励されています。

塗料・コーティングセグメントの成長：塗料・コーティングセグメントは、シリカ系マット剤の重要なユーザーであり、耐久性、質感、均一性といった特定の表面特性を生み出すために使用されます。シリカ系マット剤へのニーズは、特に新興国における産業用塗料、自動車再塗装、建設市場の成長が牽引しています。

高性能コーティングへの嗜好：耐スクラッチ性、耐摩耗性、アンチブロッキング性を向上させ、つや消し仕上げを維持することで、シリカ系マット剤はコーティングの性能と外観を向上させています。シリカ系マット剤の使用は、卓越した弾力性、耐候性、耐薬品性を備えた高性能コーティングへのニーズが原動力となっています。

技術の進歩粒度分布、表面改質方法、分散技術、シリカ系マット剤の配合はすべて、継続的な研究開発によって改善されています。市場の成長と差別化は、コーティング特性の向上、光沢変動の低減、艶消し効率の改善を目標とした技術革新によって促進されます。

無溶剤と水性配合への移行：環境と規制への配慮の結果、水性と無溶剤塗料への傾斜が強まっているため、これらの配合と相性の良いシリカ系マット剤へのニーズが高まっています。水性マット剤の市場受容は、揮発性有機化合物（VOC）排出量の低減、作業員の安全性向上、後片付けの簡素化といった利点によって促進されています。

マット仕上げに対する顧客の嗜好の高まり：現代的な美的魅力、耐指紋性、防眩性のため、艶消し仕上げは、電子機器、民生用電子機器製品、家具、包装を含む様々な製品に使用され、顧客の間でますます人気が高まっています。生産者は、シリカをベースとするマット剤を使用することで、さまざまな用途で艶消し表面に対する消費者の需要を満たすことができます。

3Dプリンティング材料へのニーズの高まり：表面の質感、印刷解像度、後処理能力を向上させるため、3Dプリンティング材料はシリカ系マット剤を使用しています。アディティブ・マニュファクチャリングセグメントの成長と、自動車、ヘルスケア、航空宇宙、消費財産業における新たな用途の創出により、特殊なマット剤の需要が高まっています。

シリカ系マット剤の世界市場抑制要因

シリカ系マット剤市場には、いくつかの要因が抑制要因や課題として作用する可能性があります。これらには以下が含まれます。

健康と安全への懸念シリカ系マット剤を使用している人が吸い込む呼吸性の結晶性シリカ粒子は、健康上の懸念をもたらす可能性があります。肺がん、慢性閉塞性肺疾患、珪肺症は、仕事中のシリカ粉塵暴露（COPD）から生じる可能性のある呼吸器疾患の一つです。市場の拡大は、厳しい労働安全衛生法とシリカに関連するリスクに対する一般市民の意識の高まりによって制約を受ける可能性があります。

規制：健康と環境への懸念から、世界中の規制機関が結晶シリカを含む特定のシリカ系マット剤の使用に制限を設けています。製造業者は、REACH（化学品の登録、評価、認可、制限）やOSHA（労働安全衛生局）の基準などの規制を遵守するために、調査、検査、コンプライアンス対策に投資しなければなりません。このため、操業コストが増加し、製品の入手が制限されます。

代替マット剤による代替：ポリマー、ワックス、沈殿シリカ、炭酸カルシウムなど、有機化合物も無機化合物も、シリカ系マット剤と競合します。コスト、分散性、耐スクラッチ性の向上、人体や環境に対する危険性の低減などの点で、代替品の方が有利な場合があり、市場競争や代替が促進される可能性があります。

コーティング特性への影響：シリカ系マット剤は、高い添加量になると、密着性、透明性、皮膜の完全性、耐スクラッチ性などのコーティング特性に影響を与える可能性があります。配合者やエンドユーザーにとって、艶消し仕上げの要求とコーティングの特性のバランスを取ることは難しく、その結果、コーティングの配合において妥協やトレードオフを余儀なくされることがあります。

相溶性の問題：シリカ系マット剤の分散安定性、皮膜形成、コーティング性能は、特定のコーティング樹脂、添加剤、顔料、溶剤系との不適合によって影響を受ける場合があります。相溶性の問題は、配合の変更、より多くの検査、最適化作業を必要とする可能性があり、メーカーの開発時間と費用を増加させることになります。

粒度分布の難しさ：シリカ系マット剤を使用する場合、適切な艶消し仕上げと表面テクスチャーを得るためには、粒度分布、形態、表面形態を正確にコントロールする必要があります。粒子特性や分布のばらつきによって、コーティングの外観、光沢度、つや消し効率にばらつきが生じ、最終製品の品質や顧客の満足度に影響を及ぼす可能性があります。

コスト感覚：他のマット剤や光沢低減添加剤と比較して、シリカ系マット剤、特に最適化された特性を持つ特殊グレードは高価である可能性があります。エンドユーザーの価格感応度は、シリカ系マット剤の使用を制限し、特に価格競争の激しいセグメントや不況時には、より安価な代替品への需要を高める可能性があります。

目次

第1章 シリカ系マット剤の世界市場のイントロダクション

• 市場概要
• 調査範囲
• 前提条件

第2章 エグゼクティブサマリー

第3章 VERIFIED MARKET RESEARCHの調査手法

• データマイニング
• バリデーション
• 一次資料
• データソース一覧

第4章 シリカ系マット剤の世界市場展望

• 概要
• 市場力学
  • 促進要因
  • 抑制要因
  • 機会
• ポーターのファイブフォースモデル
• バリューチェーン分析

第5章 シリカ系マット剤の世界市場：技術別

• 概要
• 水性
• 溶剤ベース
• 放射線硬化と高固形分
• 粉末

第6章 シリカ系マット剤の世界市場：用途別

• 概要
• 産業用
• アーキテクチャ
• 皮革
• 木材
• 印刷インキ
• その他

第7章 シリカ系マット剤の世界市場：地域別

• 概要
• 北米
  • 米国
  • カナダ
  • メキシコ
• 欧州
  • ドイツ
  • 英国
  • フランス
  • その他の欧州
• アジア太平洋
  • 中国
  • 日本
  • インド
  • その他のアジア太平洋
• その他
  • ラテンアメリカ
  • 中東

第8章 世界のシリカ系マット剤市場の競合情勢

• 概要
• 各社の市場ランキング
• 主要開発戦略

第9章 企業プロファイル

• Evonik Industries AG
• W.R. Grace & Co.-Conn
• PPG Industries
• PQ Corporation
• The Lubrizol Corporation
• Imerys
• Akzo Nobel N.V.

第10章 付録

• 関連調査

Silica-Based Matting Agents Market Size And Forecast

Silica-Based Matting Agents Market size was valued at USD 488.03 Million in 2024 and is projected to reach USD 688.73 Million by 2032, growing at a CAGR of 4.40% during the forecasted period 2026 to 2032.

Since protective coatings are more enduring and have higher clarity than traditional paints, demand for them has been driving this rise. These are frequently used as pigment extenders, allowing the paint to cover surfaces more evenly and using less paint each application. The industry is also being driven by a surge in demand for matte-finished surfaces and automobiles. The Global Silica-Based Matting Agents Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Silica Based Matting Agents Market Drivers

The market drivers for the Silica Based Matting Agents Market can be influenced by various factors. These may include:

Growing End-Use Industry Demand: To give surfaces a matte or satin appearance, silica-based matting agents are extensively utilised in a variety of industries, including paints & coatings, inks, adhesives, and plastics. The need for silica-based matting agents is driven by the expanding demand in the furniture, packaging, construction, and automotive industries for aesthetically pleasing and superior surface treatments.

Growing Concern for Environmental Regulations: Silica-based matting agents have benefits like low emissions of volatile organic compounds (VOCs), non-toxicity, and conformity with rules set forth by the Environmental Protection Agency (EPA) and REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals). The use of environmentally friendly matting agents is encouraged by rising public knowledge of environmental issues and laws.

Growth in the Paints and Coatings Sector: The paints and coatings sector is a significant user of matting agents based on silica, which are used to produce specific surface properties like durability, texture, and uniformity. The need for silica-based matting agents is driven by the growth of the industrial coatings, automotive refinish, and construction markets, especially in emerging nations.

Preference for High-Performance Coatings: By enhancing scratch resistance, abrasion resistance, and anti-blocking qualities while preserving a matte finish, silica-based matting agents improve coating performance and appearance. The use of silica-based matting agents is driven by the need for high-performance coatings with exceptional resilience, weatherability, and chemical resistance.

Technological Advancements: Particle size distribution, surface modification methods, dispersion technologies, and silica-based matting agent formulations are all improved by continuous research and development. Market growth and differentiation are fueled by innovations targeted at increasing coating characteristics, decreasing gloss fluctuations, and improving matting efficiency.

Transition to Solvent-Free and Waterborne Formulations: The need for silica-based matting agents that work well with these formulations is driven by the increasing inclination towards aqueous and solvent-free coatings as a result of environmental and regulatory considerations. Market acceptance of water-based matting agents is fueled by advantages such lower volatile organic compound (VOC) emissions, increased worker safety, and simpler cleanup.

Growing Customer Preference for Matte Finishes: Because of their modern aesthetic appeal, resistance to fingerprints, and anti-glare qualities, matte finishes are becoming more and more popular among customers for use in a variety of products, including electronics, appliances, furniture, and packaging. Producers are able to satisfy consumer demand for matte surfaces in a variety of applications by using matting agents based on silica.

Growing Need for 3D Printing Materials: To improve surface texture, print resolution, and post-processing capabilities, 3D printing materials use silica-based matting agents. Specialised matting agents are in high demand due to the growth of the additive manufacturing sector and the creation of new applications in the automotive, healthcare, aerospace, and consumer goods industries.

Global Silica Based Matting Agents Market Restraints

Several factors can act as restraints or challenges for the Silica Based Matting Agents Market. These may include:

Health and Safety concerns: Respirable crystalline silica particles that are breathed by individuals using silica-based matting products may present health concerns. Lung cancer, chronic obstructive pulmonary disease, and silicosis are among the respiratory conditions that can result from silica dust exposure at work (COPD). Market expansion may be constrained by tight occupational health and safety laws and rising public awareness of the risks associated with silica.

Regulations: Because of health and environmental concerns, regulatory bodies around the world have placed limitations on the use of specific silica-based matting agents that contain crystalline silica. Manufacturers must invest in research, testing, and compliance measures in order to comply with regulations like REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) and OSHA (Occupational Safety and Health Administration) standards. This increases operational costs and restricts the availability of products.

Substitution by Alternative Matting Agents: Both organic and inorganic compounds, such as polymers, waxes, precipitated silica, and calcium carbonate, compete with silica-based matting agents. Alternatives may be more advantageous in terms of cost, greater dispersibility, increased scratch resistance, or decreased dangers to human health and the environment, which could encourage market rivalry and substitution.

Effect on Coating Properties: At higher loading levels, silica-based matting agents can have an impact on coating characteristics like adhesion, clarity, film integrity, and scratch resistance. For formulators and end users, striking a balance between the demands for a matte finish and the characteristics of a coating can be difficult, resulting in compromises or trade-offs in coating formulations.

Compatibility Problems: The dispersion stability, film formation, and coating performance of silica-based matting agents may be impacted by their incompatibility with specific coating resins, additives, pigments, or solvent systems. Compatibility issues could necessitate formula changes, more testing, and optimisation work, which would add to the time and expense of development for manufacturers.

Difficulties with Particle Size Distribution: Precise control over particle size distribution, shape, and surface morphology is necessary when using silica-based matting agents to achieve the appropriate matte finish and surface texture. Inconsistencies in coating look, gloss levels, and matting efficiency can result from variations in particle properties and distribution, which can affect the quality of the final product and the happiness of the customer.

Cost Sensitivity: Compared to other matting agents or gloss-reducing additives, silica-based matting agents, especially specialty grades with optimised characteristics, may be more expensive. Price sensitivity among end users may restrict the uptake of silica-based matting agents and increase demand for less expensive alternatives, especially in price-competitive sectors or during recessions.

Global Silica-Based Matting Agents Market Segmentation Analysis

The Global Silica-Based Matting Agents Market is Segmented on the basis of Technology, Application, And Geography.

Silica-Based Matting Agents Market, By Technology

• Water-based
• Solvent-based
• Radiation Cure and High Solids
• Powder

Based on the Technology, the market is bifurcated into Water-based, Solvent-based, Radiation Cure and High Solids, and Powder. The Water-Based segment accounted for the largest market share in 2022 and is projected to grow at a significant CAGR during the forecast period. This is because Water-Based contains 80% water and 20% solvent. They are used in a wide variety of applications like wood coating, industrial coatings, architectural coating, plastic coating, etc. They have higher resistance and abrasion. In most cases, Silica based matting is used with Water-Based solutions.

Silica-Based Matting Agents Market, By Application

• Industrial
• Architectural
• Leather
• Wood
• Printing Inks
• Others

Based on Application, the Global Silica-Based Matting Agents Market has been segmented into Industrial, Architectural, Leather, Wood, Printing Inks, and Others. The architectural segment accounted for the largest market share in 2022 and is projected to grow at the highest CAGR during the forecast period. This is because both the interior and outside walls have architectural finishes. They are used for business, industrial settings, and domestic. They are also utilized for decorative purposes, such as in the case of murals, hardwood flooring, etc.

Silica-Based Matting Agents Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world

Based on Geography, the Global Silica-Based Matting Agents Market is classified into North America, Europe, Asia Pacific, and the Rest of the world. North America accounted for the largest market share and is projected to grow at a significant CAGR during the forecast period. The markets in China and India are responsible for this. The market is quite fertile as a result of these emerging countries, where there are numerous construction projects. Construction continues to account for a sizeable portion of the country's GDP despite the real estate industry's ups and downs throughout the years.

Key Players

The "Global Silica-Based Matting Agents Market" study report will provide valuable insight with an emphasis on the global market including some of the major players such as Evonik Industries AG, W.R. Grace & Co.-Conn, PPG Industries, PQ Corporation, The Lubrizol Corporation, Imerys, and Akzo Nobel N.V.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

Key Developments

• In November 2021, Three widely useful matting agents are now available from Evonik under the names ACEMATT OK 390, ACEMATT HK 390, and ACEMATT HK 520. Precipitated silica is the foundation of the ACEMATT product line.
• In August 2021, The "SYLOID MX 110 silica" product from Grace Company was introduced for use in general industrial coatings and high-performance coils.
• Ace Matrix Analysis
• The Ace Matrix provided in the report would help to understand how the major key players involved in this industry are performing as we provide a ranking for these companies based on various factors such as service features & innovations, scalability, innovation of services, industry coverage, industry reach, and growth roadmap. Based on these factors, we rank the companies into four categories as Active, Cutting Edge, Emerging, and Innovators.
• Market Attractiveness
• The image of market attractiveness provided would further help to get information about the region that is majorly leading in the Global Silica-Based Matting Agents Market. We cover the major impacting factors that are responsible for driving the industry growth in the given region.
• Porter's Five Forces
• The image provided would further help to get information about Porter's five forces framework providing a blueprint for understanding the behavior of competitors and a player's strategic positioning in the respective industry. Porter's five forces model can be used to assess the competitive landscape in the Global Silica-Based Matting Agents Market, gauge the attractiveness of a certain sector, and assess investment possibilities.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL SILICA-BASED MATTING AGENTS MARKET

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4 GLOBAL SILICA-BASED MATTING AGENTS MARKET OUTLOOK

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5 GLOBAL SILICA-BASED MATTING AGENTS MARKET, BY TECHNOLOGY

• 5.1 Overview
• 5.2 Water-based
• 5.3 Solvent-based
• 5.4 Radiation Cure and High Solids
• 5.5 Powder

6 GLOBAL SILICA-BASED MATTING AGENTS MARKET, BY APPLICATION

• 6.1 Overview
• 6.2 Industrial
• 6.3 Architectural
• 6.4 Leather
• 6.5 Wood
• 6.6 Printing Inks
• 6.7 Others

7 GLOBAL SILICA-BASED MATTING AGENTS MARKET, BY GEOGRAPHY

• 7.1 Overview
• 7.2 North America
  • 7.2.1 U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 Middle East

8 GLOBAL SILICA-BASED MATTING AGENTS MARKET COMPETITIVE LANDSCAPE

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9 COMPANY PROFILES

• 9.1 Evonik Industries AG
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 W.R. Grace & Co.-Conn
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 PPG Industries
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 PQ Corporation
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 The Lubrizol Corporation
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments
• 9.6 Imerys
  • 9.6.1 Overview
  • 9.6.2 Financial Performance
  • 9.6.3 Product Outlook
  • 9.6.4 Key Developments
• 9.7 Akzo Nobel N.V.
  • 9.7.1 Overview
  • 9.7.2 Financial Performance
  • 9.7.3 Product Outlook
  • 9.7.4 Key Developments

10 Appendix

• 10.1 Related Research