![]() |
市場調査レポート
商品コード
1725139
スターリングエンジン市場の2032年までの予測:タイプ別、用途別、エンドユーザー別、地域別の世界分析Stirling Engine Market Forecasts to 2032 - Global Analysis By Type (Alpha Stirling Engine, Beta Stirling Engine and Gamma Stirling Engine), Application, End User and By Geography |
||||||
カスタマイズ可能
|
スターリングエンジン市場の2032年までの予測:タイプ別、用途別、エンドユーザー別、地域別の世界分析 |
出版日: 2025年05月03日
発行: Stratistics Market Research Consulting
ページ情報: 英文 200+ Pages
納期: 2~3営業日
|
Stratistics MRCによると、スターリングエンジンの世界市場は2025年に13億米ドルを占め、予測期間中のCAGRは8.5%で、2032年には24億米ドルに達する見込みです。
スターリングエンジンは熱機関の一種であり、温度差のある空気や他の気体の圧縮と膨張を繰り返すことで作動し、熱エネルギーを機械的な仕事に変換します。スターリング・サイクルは、ガスを加熱して膨張させ、冷却して圧縮するという2つの主要段階を経て作動します。内燃機関とは異なり、スターリングエンジンは外部燃焼機関です。つまり、燃焼はエンジンの外部で行われるため、高効率で低排出ガスです。
IEAによると、2021年の原油平均価格は1バレル当たり70.91ドルとなり、2015年以来2番目に高い水準となります。
クリーンエネルギー・ソリューションに対する需要の高まり
クリーンエネルギー・ソリューションに対する需要の高まりは、持続可能な技術の革新と採用を促進することで、スターリングエンジン市場に絶対的な影響を与えています。高効率と低排出ガスで知られるスターリングエンジンは、太陽光発電やバイオマス発電などの再生可能エネルギー発電システムで支持を集めています。こうした関心の高まりが市場の成長を促し、投資を促進し、環境に優しい代替エネルギーの市場開拓を可能にしています。地球環境への関心が高まる中、スターリングエンジンは、より環境に優しいエネルギーソリューションへの確実な道筋を提供します。
高い初期コスト
スターリングエンジンの初期コストが高いことが、市場成長の大きな障壁となっています。これらのエンジンは高価な材料と高度な製造技術を必要とするため、広く普及させるには手が届きにくいです。その結果、消費者や企業はスターリングエンジン技術への投資をためらい、自動車や再生可能エネルギーといった産業への拡大が妨げられる可能性があります。高額な先行投資が潜在的な購入者を躊躇させ、市場浸透を遅らせています。
技術の進歩
技術の進歩は、効率、信頼性、拡張性を高めることによって、スターリングエンジン市場に大きな変化をもたらしています。材料、精密工学、制御システムの革新により、より優れた熱管理と機械的損失の低減が可能になり、全体的な性能が向上しています。こうした改善により、太陽光発電や廃熱回収などの再生可能エネルギー用途での採用が拡大しています。その結果、市場は持続可能なソリューションとエネルギー効率の高い代替品に重点を置く産業からの関心が高まり、着実な成長と技術革新の原動力となっています。
限定的な市場浸透
市場浸透が限定的であることは、スターリングエンジン市場の広範な普及と成長を制限し、有害かつ阻害的な影響を及ぼしています。この技術は比較的ニッチであるため、規模の経済が阻害され、研究開発への投資が減少しています。このような認識不足と限られたインフラは、技術革新の遅れ、製造コストの上昇、消費者の信頼の低下を招き、最終的に市場の拡大を遅らせ、スターリングエンジンが既存の技術と競争することを難しくしています。
COVID-19の影響
COVID-19の大流行は、スターリングエンジン市場に大きな影響を与え、サプライチェーンを混乱させ、生産を遅らせ、財務上の不安を引き起こしました。新技術への投資が減少し、産業の優先順位がシフトしたため、短期的には成長が鈍化しました。しかし、パンデミック後は持続可能なエネルギーソリューションへの注目が高まり、再生可能エネルギーや環境システム向けのスターリングエンジン・アプリケーションへの関心が再び高まり、市場は回復力を示しました。
予測期間中、冷凍システム分野が最大になる見込み
高効率で環境に優しい冷却ソリューションのため、冷凍システム分野は予測期間中最大の市場シェアを占めると予想されます。クローズドサイクル運転と低排出ガスで知られるスターリングエンジンは、持続可能性を優先する冷凍用途での採用が増加しています。その静かな運転と様々な熱源を利用できる能力は、商業・住宅両方の分野でその魅力を高めています。こうした需要の高まりが技術革新を支え、スターリングエンジン技術の市場拡大を加速しています。
予測期間中、発電分野が最も高いCAGRが見込まれる
予測期間中、発電分野が最も高い成長率を示すと予測されます。スターリングエンジンは太陽熱やバイオマスなど様々な熱源を利用できるため、低排出で再生可能なエネルギーソリューションの需要が高まるにつれて、ますます人気が高まっています。メンテナンスの必要性が低く、効率が高く、運転音が静かなため、オフグリッドや分散型電源の用途にはさらに魅力的です。イノベーションと市場成長は、再生可能エネルギー発電に対する消費者の欲求の高まりによって直接後押しされています。
予測期間中、クリーンで効率的なエネルギーソリューションに対する需要の高まりから、アジア太平洋地域が最大の市場シェアを占めると予想されます。再生可能エネルギーへの注目の高まり、持続可能な技術に対する政府の支援、同地域の産業基盤の拡大が市場成長を後押ししています。さらに、複数の熱源で作動するエンジンの能力は、発電や自動車を含む多様な用途に理想的であるため、技術革新が促進され、地域全体での採用が拡大しています。
予測期間中、北米地域は最も高いCAGRを示すと予想されます。持続可能な電源に対する需要の高まりにより、スターリングエンジンは、住宅、商業施設、遠隔地での用途に理想的な低排出の代替手段を提供します。その静かな運転と、太陽熱や廃熱を含む多様な熱源を利用する能力は、エネルギーの多様化と回復力に貢献します。この市場の成長は、環境目標を支援し、エネルギー安全保障を強化し、地域全体のクリーンエネルギー技術の革新を促進します。
According to Stratistics MRC, the Global Stirling Engine Market is accounted for $1.3 billion in 2025 and is expected to reach $2.4 billion by 2032 growing at a CAGR of 8.5% during the forecast period. A Stirling engine is a type of heat engine that operates by cyclic compression and expansion of air or another gas at different temperatures, converting heat energy into mechanical work. It works on the Stirling cycle, involving two main phases: heating the gas to expand it and cooling it to compress it, often using external heat sources like solar energy or combustion. Unlike internal combustion engines, Stirling engines are external combustion engines, meaning the combustion takes place outside the engine, offering high efficiency and low emissions.
According to the IEA, the average price of oil in 2021 will be $70.91 per barrel, the second-highest level since 2015. energy prices will skyrocket in 2021.
Rising Demand for Clean Energy Solutions
The rising demand for clean energy solutions is absolutely impacting the Stirling engine market by driving innovation and adoption of sustainable technologies. Stirling engines, known for their high efficiency and low emissions, are gaining traction in renewable energy systems such as solar and biomass power generation. This surge in interest is fostering market growth, encouraging investments, and enabling the development of eco-friendly energy alternatives. As global environmental concerns grow, stirling engines offer a reliable path toward greener energy solutions.
High Initial Costs
The high initial costs of stirling engines pose a significant barrier to market growth. These engines require expensive materials and advanced manufacturing techniques, making them less affordable for widespread adoption. As a result, consumers and businesses may hesitate to invest in stirling engine technology, hindering its expansion into industries like automotive and renewable energy. The high upfront investment can deter potential buyers, slowing market penetration.
Advancements in Technology
Advancements in technology are significantly transforming the stirling engine market by enhancing efficiency, reliability, and scalability. Innovations in materials, precision engineering, and control systems have enabled better heat management and reduced mechanical losses, boosting overall performance. These improvements are driving wider adoption in renewable energy applications, such as solar power and waste heat recovery. As a result, the market is witnessing increased interest from industries focused on sustainable solutions and energy-efficient alternatives, fueling steady growth and innovation.
Limited Market Penetration
Limited market penetration has a damaging and hindering impact on the stirling Engine market by restricting its widespread adoption and growth. The technology remains relatively niche, preventing economies of scale and reducing investment in research and development. This lack of awareness and limited infrastructure results in slower innovation, higher production costs, and reduced consumer confidence, ultimately slowing market expansion and making it harder for the stirling Engine to compete with established technologies.
Covid-19 Impact
The COVID-19 pandemic had a significant impact on the stirling engine market, disrupting supply chains, delaying production, and causing financial uncertainty. Reduced investments in new technologies and shifts in industrial priorities led to slower growth in the short term. However, the market showed resilience, with an increasing focus on sustainable energy solutions post-pandemic, driving renewed interest in stirling engine applications for renewable energy and environmental systems.
The refrigeration systems segment is expected to be the largest during the forecast period
The refrigeration systems segment is expected to account for the largest market share during the forecast period, due to its high efficiency and eco-friendly cooling solutions. Stirling engines, known for their closed-cycle operation and low emissions, are increasingly being adopted in refrigeration applications that prioritize sustainability. Their quiet operation and ability to use various heat sources enhance their appeal in both commercial and residential sectors. This growing demand supports innovation and accelerates market expansion for stirling engine technologies.
The power generation segment is expected to have the highest CAGR during the forecast period
Over the forecast period, the power generation segment is predicted to witness the highest growth rate, as stirling engines can use a variety of heat sources, such as solar and biomass, they are becoming more and more popular as the demand for low-emission and renewable energy solutions increases. Their low maintenance requirements, great efficiency, and silent operation make them even more appealing for off-grid and distributed power applications. Innovation and market growth are directly boosted by consumers increasing desire for renewable electricity generation.
During the forecast period, the Asia Pacific region is expected to hold the largest market share due to rising demand for clean and efficient energy solutions. Increasing focus on renewable energy, government support for sustainable technologies, and the region's growing industrial base are propelling market growth. Additionally, the engine's ability to operate on multiple heat sources makes it ideal for diverse applications, including power generation and automotive, fostering innovation and expanding its adoption across the region.
Over the forecast period, the North America region is anticipated to exhibit the highest CAGR, owing to growing demand for sustainable power sources, stirling engines offer low-emission alternatives ideal for residential, commercial, and remote applications. Their quiet operation and ability to utilize diverse heat sources, including solar and waste heat, contribute to energy diversification and resilience. This market growth supports environmental goals, enhances energy security, and fosters innovation in clean energy technologies across the region.
Key players in the market
Some of the key players profiled in the Stirling Engine Market include Stirling Energy Systems, Microgen Engine Corporation, Infinia Corporation, EcoPower Technologies, Genoa Technology, Sunpower Inc., Philips, Clean Energy Systems, Armstrong Fluid Technology, Hitachi Zosen Corporation, Azelio AB, Glen Mills Inc., Skach Manufacturing Co., Swedish Stirling AB, Whisper Tech Limited, Genesis Scientific Ltd., ECOGEN and INNOGY.
In October 2021, Azelio, introduced its TES.POD system a long-duration electro-thermal energy storage solution. This system is designed for commercial and industrial applications, especially in areas with unstable or off-grid electricity access.
In June 2020, Azelio, has partnered with ALEC Energy, to advance renewable energy storage solutions in the Middle East and Africa. The collaboration, formalized through a Memorandum of Understanding (MoU), aims to install 49 MW of Azelio's thermal energy storage systems.