Product Code: SR1122A389_Report
The global cone beam imaging market size reached US$ 698.5 Million in 2021. Looking forward, IMARC Group expects the market to reach US$ 1,193.6 Million by 2027, exhibiting a growth rate (CAGR) of 9.4% during 2022-2027. Keeping in mind the uncertainties of COVID-19, we are continuously tracking and evaluating the direct as well as the indirect influence of the pandemic on different end use sectors. These insights are included in the report as a major market contributor.
Cone beam imaging refers to a computed tomography technique used for maxillofacial and dental surgeries. It generates three dimensional (3D) images of bones, nerve paths, soft tissues and dental structures in the craniofacial region. The imaging machine includes a cone-shaped digital X-ray scanner mounted on a 360-degree rotating arm to obtain images from multiple angles in a single scan. In comparison to the traditionally used techniques, the cone-beam technique is non-invasive, requires lesser radiation dose and provides high-quality 3D images. As a result, it is extensively used for various clinical applications, such as dental implant planning, visualization of abnormal teeth, evaluation of face and jaw deformities, cleft palate assessment and diagnosis of dental caries.
The increasing prevalence of oral problems, along with the rising geriatric population across the globe, represents one of the key factors driving the growth of the market. Furthermore, the growing consumer preference for cosmetic dentistry is creating a positive outlook for the market. Healthcare providers are also using cone beam imaging for the improved study of airway pathology and anesthesiology. Additionally, various technological advancements, such as the development of flat panel detectors for conducting image-guided surgeries, are acting as other growth-inducing factors. Imaging device manufacturers are producing novel variants by integrating X-ray tubes, mobile C-arm platforms, and digital displays to enhance the convenience for the operator. Other factors, including rising healthcare expenditures of the individuals, along with significant improvements in the healthcare infrastructure, especially in developing nations, are anticipated to drive the market further.
Key Market Segmentation:
- IMARC Group provides an analysis of the key trends in each sub-segment of the global cone beam imaging market report, along with forecasts at the global, regional and country level from 2022-2027. Our report has categorized the market based on application, patient position, detector type and end user.
Breakup by Application:
- Implantology
- Orthodontics
- Oral Surgery
- Endodontics
- Periodontology
- Orthopedics
- ENT
- Others
Breakup by Patient Position:
Breakup by Detector Type:
- Flat Panel Image Detector
- Image Intensifier Type Detector
Breakup by End User:
- Hospitals and Clinics
- Diagnostic Centers
- Others
Breakup by Region:
- North America
- United States
- Canada
- Asia-Pacific
- China
- Japan
- India
- South Korea
- Australia
- Indonesia
- Others
- Europe
- Germany
- United Kingdom
- Italy
- Spain
- Russia
- Others
- Latin America
- Brazil
- Mexico
- Others
- Middle East and Africa
Competitive Landscape:
- The competitive landscape of the industry has also been examined along with the profiles of the key players being Asahi RoEntgen Ind. Co. Ltd., Carestream Health Inc., Cefla S.C., Curve Beam LLC, Danaher Corporation, Dentsply Sirona, J. Morita Mfg. Corp., Planmeca Group, Prexion Corporation and Vatech Co. Ltd.
- Key Questions Answered in This Report
- 1. What was the size of the global cone beam imaging market in 2021?
- 2. What is the expected growth rate of the global cone beam imaging market during 2022-2027?
- 3. What has been the impact of COVID-19 on the global cone beam imaging market?
- 4. What are the key factors driving the global cone beam imaging market?
- 5. What is the breakup of the global cone beam imaging market based on application?
- 6. What is the breakup of the global cone beam imaging market based on the patient position?
- 7. What is the breakup of the global cone beam imaging market based on the end user?
- 8. What are the key regions in the global cone beam imaging market?
- 9. Who are the key players/companies in the global cone beam imaging market?
Table of Contents
1 Preface
2 Scope and Methodology
- 2.1 Objectives of the Study
- 2.2 Stakeholders
- 2.3 Data Sources
- 2.3.1 Primary Sources
- 2.3.2 Secondary Sources
- 2.4 Market Estimation
- 2.4.1 Bottom-Up Approach
- 2.4.2 Top-Down Approach
- 2.5 Forecasting Methodology
3 Executive Summary
4 Introduction
- 4.1 Overview
- 4.2 Key Industry Trends
5 Global Cone Beam Imaging Market
- 5.1 Market Overview
- 5.2 Market Performance
- 5.3 Impact of COVID-19
- 5.4 Market Forecast
6 Market Breakup by Application
- 6.1 Implantology
- 6.1.1 Market Trends
- 6.1.2 Market Forecast
- 6.2 Orthodontics
- 6.2.1 Market Trends
- 6.2.2 Market Forecast
- 6.3 Oral Surgery
- 6.3.1 Market Trends
- 6.3.2 Market Forecast
- 6.4 Endodontics
- 6.4.1 Market Trends
- 6.4.2 Market Forecast
- 6.5 Periodontology
- 6.5.1 Market Trends
- 6.5.2 Market Forecast
- 6.6 Orthopedics
- 6.6.1 Market Trends
- 6.6.2 Market Forecast
- 6.7 ENT
- 6.7.1 Market Trends
- 6.7.2 Market Forecast
- 6.8 Others
- 6.8.1 Market Trends
- 6.8.2 Market Forecast
7 Market Breakup by Patient Position
- 7.1 Standing
- 7.1.1 Market Trends
- 7.1.2 Market Forecast
- 7.2 Seating
- 7.2.1 Market Trends
- 7.2.2 Market Forecast
- 7.3 Supine
- 7.3.1 Market Trends
- 7.3.2 Market Forecast
8 Market Breakup by Detector Type
- 8.1 Flat Panel Image Detector
- 8.1.1 Market Trends
- 8.1.2 Market Forecast
- 8.2 Image Intensifier Type Detector
- 8.2.1 Market Trends
- 8.2.2 Market Forecast
9 Market Breakup by End User
- 9.1 Hospitals and Clinics
- 9.1.1 Market Trends
- 9.1.2 Market Forecast
- 9.2 Diagnostic Centers
- 9.2.1 Market Trends
- 9.2.2 Market Forecast
- 9.3 Others
- 9.3.1 Market Trends
- 9.3.2 Market Forecast
10 Market Breakup by Region
- 10.1 North America
- 10.1.1 United States
- 10.1.1.1 Market Trends
- 10.1.1.2 Market Forecast
- 10.1.2 Canada
- 10.1.2.1 Market Trends
- 10.1.2.2 Market Forecast
- 10.2 Asia-Pacific
- 10.2.1 China
- 10.2.1.1 Market Trends
- 10.2.1.2 Market Forecast
- 10.2.2 Japan
- 10.2.2.1 Market Trends
- 10.2.2.2 Market Forecast
- 10.2.3 India
- 10.2.3.1 Market Trends
- 10.2.3.2 Market Forecast
- 10.2.4 South Korea
- 10.2.4.1 Market Trends
- 10.2.4.2 Market Forecast
- 10.2.5 Australia
- 10.2.5.1 Market Trends
- 10.2.5.2 Market Forecast
- 10.2.6 Indonesia
- 10.2.6.1 Market Trends
- 10.2.6.2 Market Forecast
- 10.2.7 Others
- 10.2.7.1 Market Trends
- 10.2.7.2 Market Forecast
- 10.3 Europe
- 10.3.1 Germany
- 10.3.1.1 Market Trends
- 10.3.1.2 Market Forecast
- 10.3.2 United Kingdom
- 10.3.2.1 Market Trends
- 10.3.2.2 Market Forecast
- 10.3.3 Italy
- 10.3.3.1 Market Trends
- 10.3.3.2 Market Forecast
- 10.3.4 Spain
- 10.3.4.1 Market Trends
- 10.3.4.2 Market Forecast
- 10.3.5 Russia
- 10.3.5.1 Market Trends
- 10.3.5.2 Market Forecast
- 10.3.6 Others
- 10.3.6.1 Market Trends
- 10.3.6.2 Market Forecast
- 10.4 Latin America
- 10.4.1 Brazil
- 10.4.1.1 Market Trends
- 10.4.1.2 Market Forecast
- 10.4.2 Mexico
- 10.4.2.1 Market Trends
- 10.4.2.2 Market Forecast
- 10.4.3 Others
- 10.4.3.1 Market Trends
- 10.4.3.2 Market Forecast
- 10.5 Middle East and Africa
- 10.5.1 Market Trends
- 10.5.2 Market Breakup by Country
- 10.5.3 Market Forecast
11 SWOT Analysis
- 11.1 Overview
- 11.2 Strengths
- 11.3 Weaknesses
- 11.4 Opportunities
- 11.5 Threats
12 Value Chain Analysis
13 Porters Five Forces Analysis
- 13.1 Overview
- 13.2 Bargaining Power of Buyers
- 13.3 Bargaining Power of Suppliers
- 13.4 Degree of Competition
- 13.5 Threat of New Entrants
- 13.6 Threat of Substitutes
14 Price Analysis
15 Competitive Landscape
- 15.1 Market Structure
- 15.2 Key Players
- 15.3 Profiles of Key Players
- 15.3.1 Asahi RoEntgen Ind. Co. Ltd.
- 15.3.1.1 Company Overview
- 15.3.1.2 Product Portfolio
- 15.3.2 Carestream Health Inc.
- 15.3.2.1 Company Overview
- 15.3.2.2 Product Portfolio
- 15.3.2.3 SWOT Analysis
- 15.3.3 Cefla S.C.
- 15.3.3.1 Company Overview
- 15.3.3.2 Product Portfolio
- 15.3.3.3 Financials
- 15.3.3.4 SWOT Analysis
- 15.3.4 Curve Beam LLC
- 15.3.4.1 Company Overview
- 15.3.4.2 Product Portfolio
- 15.3.5 Danaher Corporation
- 15.3.5.1 Company Overview
- 15.3.5.2 Product Portfolio
- 15.3.5.3 Financials
- 15.3.5.4 SWOT Analysis
- 15.3.6 Dentsply Sirona
- 15.3.6.1 Company Overview
- 15.3.6.2 Product Portfolio
- 15.3.6.3 Financials
- 15.3.6.4 SWOT Analysis
- 15.3.7 J. Morita Mfg. Corp.
- 15.3.7.1 Company Overview
- 15.3.7.2 Product Portfolio
- 15.3.8 Planmeca Group
- 15.3.8.1 Company Overview
- 15.3.8.2 Product Portfolio
- 15.3.9 Prexion Corporation
- 15.3.9.1 Company Overview
- 15.3.9.2 Product Portfolio
- 15.3.10 Vatech Co. Ltd.
- 15.3.10.1 Company Overview
- 15.3.10.2 Product Portfolio