市場調査レポート
商品コード
1383261
衛星地上局の世界市場 (2023年~2033年)Global Satellite Ground Station Market 2023-2033 |
|||||||
|
衛星地上局の世界市場 (2023年~2033年) |
出版日: 2023年11月20日
発行: Aviation & Defense Market Reports (A&D)
ページ情報: 英文 150+ Pages
納期: 3営業日
|
衛星地上局は、宇宙を拠点とする人工衛星との通信に使用される施設です。衛星と地上の通信ネットワークをつなぐ重要な役割を果たし、衛星との間で信号・データ・指令を送受信できるようにします。地上局は衛星通信システムの重要な構成要素であり、通信・放送・リモートセンシング・科学研究などさまざまな用途を可能にします。
地上局には、パラボラアンテナやフェーズドアレイアンテナなど、さまざまなアンテナが設置されています。これらのアンテナは、衛星との間で信号を受信し、送信する役割を担っています。使用するアンテナのサイズや種類は、用途や周波数帯によって決まります。
地上局ではアップリンクチャンネルとダウンリンクチャンネルが分かれています。アップリンクチャンネルは地上局から衛星に信号を送信し、ダウンリンクチャンネルは衛星からの信号を受信します。これらのチャンネルは様々な周波数大気で動作し、最も一般的なのはマイクロ波や無線周波数の帯域です。地上局には、信号送受信装置であるトランシーバーが装備されています。トランシーバーは電気信号を衛星通信の周波数帯域に変換する役割を担っています。信号の品質を向上させ、電力レベルを管理するために、増幅器やフィルターなどのRF(無線周波数)機器が使用されます。モデム・マルチプレクサ・復調器などのベースバンド機器は地上局に備わっています。これらの機器は、地上波ネットワークでの送信やさらなる処理に備え、信号を処理しフォーマットします。
追跡システムは、上空を移動する衛星の正確なポインティングと追跡を確実にするために地上局に組み込まれています。衛星との継続的な通信を維持するため、これらのシステムは通常、電動アンテナマウントと高度な追跡アルゴリズムを採用しています。
地上局は、衛星データを処理・保存するためのコンピューティング能力とデータ保存能力を備えています。これには、受信信号の復号・復調・分析や、後の分析・配信のためのデータの保存が含まれます。衛星は、軌道制御、ペイロードの運用、システムの保守など、さまざまな理由で地上局から指令を受信します。衛星のテレメトリーデータは、衛星の健康状態・性能・ステータスを監視するために使用されます。地上局は通常、地上の通信ネットワークにリンクされており、地上局とエンドユーザーや他のネットワークノードとの間でデータや信号の転送を可能にしています。インターネットアクセス、電話、ビデオ放送などのサービスは、この接続性によって可能になります。
当レポートでは、世界の衛星地上局市場について分析し、全体的な市場規模の動向見通しや、地域別・国別の詳細動向、主要技術の概略、市場機会などを調査しております。
A satellite ground station, also known as an Earth station or ground terminal, is a facility used to communicate with space-based satellites. It acts as a vital link between satellites and terrestrial communication networks, allowing signals, data, and commands to and from satellites to be transmitted. Ground stations are critical components of satellite communication systems, enabling a variety of applications such as telecommunications, broadcasting, remote sensing, and scientific research.
Ground stations are outfitted with a variety of antennas, such as parabolic dish antennas and phased array antennas. These antennas are responsible for receiving and transmitting signals to and from satellites. The size and type of antenna used are determined by the application and frequency band.
Uplink and downlink channels are separate for ground stations. The uplink channel transmits signals from the ground station to the satellite, whereas the downlink channel receives signals from the satellite. These channels operate on various frequency bands, most commonly in the microwave or radio frequency spectrum. Ground stations are outfitted with transceivers, which are signal-transmitting and receiving devices. They are in charge of converting electrical signals into satellite communication frequency bands. To improve signal quality and manage power levels, RF (Radio Frequency) equipment such as amplifiers and filters are used. Baseband equipment such as modems, multiplexers, and demodulators can be found in ground stations. These devices process and format signals in preparation for transmission over terrestrial networks or further processing.
Tracking systems are built into ground stations to ensure precise pointing and tracking of satellites as they move across the sky. To maintain continuous communication with the satellites, these systems typically employ motorized antenna mounts and advanced tracking algorithms.
Ground stations have computing and data storage capabilities that allow them to process and store satellite data. This could include decoding, demodulating, and analyzing received signals, as well as storing the data for later analysis or distribution. Satellites receive commands from ground stations for a variety of reasons, including orbit control, payload operations, and system maintenance. They use satellite telemetry data to monitor their health, performance, and status. Ground stations are usually linked to terrestrial communication networks, allowing data and signals to be transferred between the ground station and end-users or other network nodes. Services such as internet access, telephony, and video broadcasting are made possible by this connectivity.