小火器サイレンサーの積層造形：積層造形の市場機会

積層造形（積層造形）業界では、確立された産業分野における現実的なソリューションのために、生産レベルでの積層造形の使用事例を開発することが重視されるようになってきています。

小火器製造は、新しいプロセスや生産手段を積極的に採用する分野であることが証明されていますが、この業界の特定の分野では、場合によっては1世紀もの間、製造分野で大きな技術革新が起きていません。サイレンサー製造は、そのような分野の1つであり、創業以来、旋盤、旋盤、CNCフライスといった減法的機械加工プロセスに依存してきました。

当レポートでは、小火器サイレンサーの積層造形について調査し、サイレンサー市場の歴史、市況、積層造形の発展と採用拡大に関する将来の見通しについて、市場データ、普及率、予測など、独自のモデリングと既存の積層造形調査市場データを用い、徹底的な調査と多数の業界関係者への直接インタビューの結果をまとめています。

目次

第1章 イントロダクション

第2章 サイレンサー製造における積層造形技術の歴史と市場状況

• 積層造形の現在の市場状況と普及率
  • 米国の商業市場におけるサイレンサーの需要は、規制手続きの変更により2024年に大幅に増加する見込み
  • 積層造形技術の浸透

第3章 積層造形技術が小火器サイレンサーの改良にどのように利用されているか

第4章 結論

A growing emphasis in the Additive Manufacturing (AM) industry has been on developing use cases for additive manufacturing at the production level, for real-world solutions in established areas of industry.

This report focuses on one such area in the global industry of small arms manufacturing. Small arms manufacturing has proven it is an area that is willing to adopt new processes and means of production, though specific areas of this industry have not seen significant technology innovation in the area of manufacturing for, in some cases, a century. Silencer manufacturing is one such area that has relied on subtractive machining processes-turning, lathe, and CNC milling-since their original inception.

In 2017, AM Research published a similar market perspective on additively manufactured silencers. That perspective, now seven years in the past as of the date of publication of this report, discussed several market factors and trends which are still present in the market today.

This concise but extremely valuable report describes the history, current markets and future outlook for the silencer market with respect to the development and increasing adoption of AM.

Market data, penetration rates, and forecasting are built using proprietary modeling and existing AM Research market data, and deepened and contextualized by exhaustive research and direct interviews with a number of industry players.

Companies and organizations mentioned or profiled include but are not limited to: Sig Sauer, EOS, Tronrud Engineering, Oceana Defense, Delta P Design, RAM3D, Daniel Defense, Surefire, HuxWurx, PWS, Dead Air, CGS, Radical Firearms, and the US Military.

AM Research's reports are intended as key strategic inputs for all senior executives planning 3D printing product/market strategies and for investors who are looking to take equity positions in 3D printing firms.

AM Research also offers customized consulting and due diligence analysis.

Table of Contents

1.0. Introduction

2.0. History and Market Status of Additive Manufacturing Technologies in Silencer Manufacturing

• 2.1. Current Market Status and Penetration of AM
  • 2.1.1. Demand for Silencers in U.S. Commercial Market to Experience Massive Growth in 2024 Due to Regulatory Processing Changes
  • 2.1.2. Penetration of Additive Manufacturing Technology

3.0. How Additive Manufacturing is Being Used to Improve Small Arms Silencers

4.0. Conclusion

• About AM Research
  • About the Analyst
  • Acronyms and Abbreviations Used In this Report

List of Exhibits

• Exhibit 2-1: Current Adopters of Additive Manufacturing for Silencer Manufacturing
• Exhibit 2-2: Total U.S. Silencers Purchased Compared to Additive Penetration Rate Estimate, 2019-2032 (f)