![]() |
市場調査レポート
商品コード
1687179
太陽光発電インバーター:市場シェア分析、産業動向・統計、成長予測(2025年~2030年)Solar PV Inverters - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030) |
||||||
カスタマイズ可能
適宜更新あり
|
太陽光発電インバーター:市場シェア分析、産業動向・統計、成長予測(2025年~2030年) |
出版日: 2025年03月18日
発行: Mordor Intelligence
ページ情報: 英文 220 Pages
納期: 2~3営業日
|
太陽光発電インバーター市場規模は2025年に143億3,000万米ドルと推定され、予測期間(2025-2030年)のCAGRは4.73%で、2030年には180億5,000万米ドルに達すると予測されます。
調査対象市場は2020年にCOVID-19の影響を受けたもの、回復して流行前の水準に達しています。
太陽光発電の需要拡大は、予測期間中の太陽光発電インバーター市場の成長を刺激すると予想されます。投資の増加と野心的な太陽エネルギー目標が、調査された市場の成長を促進すると予想されます。しかし、ストリングインバーターの技術的な欠点が予測期間中の太陽光発電インバーター市場の成長を妨げると予想されます。
太陽光発電インバーターにおける製品革新と最新技術の適応は、予測期間中に太陽光発電インバーター市場に有利な成長機会を生み出すと予想されます。アジア太平洋地域が市場を独占しており、予測期間中に最も高いCAGRで推移すると予想されます。この成長は、インド、中国、オーストラリアを含むこの地域の国々における投資の増加と政府の支援政策によるものです。
セントラルインバーターは大型の系統連系装置です。定格出力が100kWpを超える太陽光発電システムで使用されることが多いです。床置きまたは地上設置型のインバーターは、太陽電池アレイから集めた直流電力をグリッド接続用の交流電力に変換します。これらの装置の容量は約50kWから1MWで、屋内でも屋外でも使用できます。
セントラルインバーターは、1つのDC-AC変換ステージで構成されています。MPP(最大電力点)電圧範囲を拡大するために、DC-DC昇圧段を備えているインバーターもあります。交流電圧を昇圧し、出力を絶縁するために低周波変圧器が使われることもあります。しかし、これは効率を低下させ、インバーターのサイズ、重量、コストを増加させる。
セントラルインバーターの最大入力電圧は通常1,000Vです。しかし、最新のセントラルインバーターには、すでに1,500Vの入力電圧を持つものもあります。これらのインバーターは、最大電圧1,500Vに基づくPVアレイを可能にし、より少ないBOS(バランス・オブ・システム)コンポーネントを必要とします。
セントラルインバーターには、モノリシック型(単一のパワートレインとマルチMPPTトラッカーを使用)とモジュール型(複数のパワートレインを使用)があります。モジュール式インバーターはより複雑だが、1つまたは複数のモジュールが故障した場合に出力を低下させて維持することができ、マルチMPPTまたはマスター・スレーブ制御アプローチのいずれかを使用できます。マルチMPPTシステムは、各フローティング・サブアレイに個別のコンバータとMPPTを使用し、部分的な遮光条件下での全体的なエネルギー収穫量を増加させる。マスター・スレーブ方式では、コントローラー・モジュールは常にオンになっています。アレイからより多くの電力が得られると、スレーブ・モジュールにスイッチを入れるよう命令し、低日射環境でのインバーター効率を最大化します。
セントラルインバーターはユーティリティ・スケールのアプリケーションに使用されるため、使用される電力網の電圧と周波数と同じものを生成する必要があります。世界にはさまざまな送電網の規格があるため、メーカーはこれらのパラメーターを相数という特定の要件に合わせてカスタマイズすることが許されており、製造されるセントラルインバーターのほとんどは三相インバーターです。
2022年1月、Sungrowはアブダビで開催された世界未来エネルギー・サミットで、出力容量1.1MWの新しい1+Xセントラルモジュラー・インバーターを発表しました。この1+Xモジュール式インバーターは、8台のユニットを組み合わせて8.8MWの出力に達することができ、エネルギー貯蔵システム(ESS)を接続するためのDC/ESSインターフェースを備えています。
このため、電力需要の増加、電力部門の脱炭素化に向けた政府の取り組み、セントラルインバーターのコスト低下が、予測期間中の同分野の成長を牽引するとみられます。
2021年にはアジア太平洋地域が太陽光発電インバーター市場を席巻し、今後もその優位性は続くとみられます。需要の大半は、世界最大の太陽エネルギー生産国でもある中国からもたらされると予想されます。
中国では、ゼロ電圧ライドスルー(ZVRT)方式を提供するソーラー・インバーターが重視されるようになっています。この制度の基準を満たすためには、太陽光発電所は壊れることなく稼働し続けなければならないです。世界最大の太陽光発電量を抱える国であるだけに、この意義はさらに大きいです。
アジア太平洋を中心に、工業化に伴う公害への懸念が世界中で高まる中、地域の太陽光発電は大きな勢いを得た。パリ協定の公約の一環として、インド政府は2022年までに175GWの再生可能エネルギー容量を達成するという野心的な目標を設定しました。この175GWのうち、100GWが太陽光発電に充てられ、そのうち40GW(40%)は分散型および屋上規模の太陽光発電プロジェクトによって達成される予定でした。この巨大な目標を達成するため、政府は2019年に、ソーラー屋上フェーズ2、PM-KUSUM、ウルトラメガ再生可能エネルギー発電パーク(UMREPPs)の開発など、いくつかの新しいプログラムを開始しました。
インドの太陽光発電ポテンシャルは750GW以上であり、同国のエネルギー安全保障シナリオ2047では、2047年までに太陽光発電設備容量479GW程度を達成する可能性が示されています。高い日射量に恵まれたインドの太陽光発電は、すでにグリッド・パリティを達成しており、太陽光発電を主流のエネルギー源として採用することを促し、ユーティリティ・スケールと屋根上太陽光発電の分野での設備容量を押し上げています。
2021年11月現在、サングロー・パワー・サプライは2014年以来、インドで10GW以上の太陽光インバーターを出荷しています。これは国全体の太陽エネルギー需要の増加によるものです。2022年3月、サングローはインドの工場能力を年産10GWに増強しました。製造部門におけるこのような大規模な開発は、予測期間中に調査された市場の成長を促進すると予想されます。
したがって、中国、インド、マレーシアなどが打ち出したさまざまな政府イニシアティブにより、予測期間中、アジア太平洋地域が太陽光発電インバーター市場を独占すると予想されます。
太陽光発電インバーター市場は細分化されています。市場の主要企業(順不同)には、FIMER SpA, Schneider Electric SE, Siemens AG, Mitsubishi Electric Corporation, Omron Corporationなどがあります。
The Solar PV Inverters Market size is estimated at USD 14.33 billion in 2025, and is expected to reach USD 18.05 billion by 2030, at a CAGR of 4.73% during the forecast period (2025-2030).
Although the market studied was affected by COVID-19 in 2020, it has recovered and reached pre-pandemic levels.
The growing demand for solar power is expected to stimulate the growth of the solar PV inverters market during the forecast period. Increasing investments and ambitious solar energy targets are expected to drive the growth of the market studied. However, technical drawbacks of string inverters are expected to hamper the growth of the solar PV inverters market during the forecast period.
Product innovation and adaptation of the latest technologies in solar PV inverters are anticipated to create lucrative growth opportunities for the solar PV inverters market during the forecast period. Asia-Pacific dominates the market, and it is expected to record the highest CAGR during the forecast period. This growth is attributed to the increasing investments and supportive government policies in the countries of this region, including India, China, and Australia.
A central inverter is a large grid feeder. It is often used in solar photovoltaic systems with rated outputs over 100 kWp. Floor or ground-mounted inverters convert DC power collected from a solar array into AC power for grid connection. These devices range in capacity from around 50kW to 1MW and can be used indoors or outdoors.
A central inverter consists of one DC-AC conversion stage. Some inverters also have a DC-DC boost stage to increase their MPP (maximum power point) voltage range. Low-frequency transformers are sometimes used to boost the AC voltage and provide isolation at the output. However, this reduces efficiency and increases the inverter's size, weight, and cost.
A central inverter typically has a maximum input voltage of 1,000V. However, some newer central inverters already come with 1,500V input voltage. These inverters allow PV arrays based on a maximum voltage of 1,500V, requiring fewer BOS (balance of system) components.
Central inverters can be monolithic (using a single power train and multi-MPPT tracker) or modular (using multiple power trains). Modular inverters are more complex but can maintain reduced power output if one or more modules fail and can use either a multi-MPPT or a master-slave control approach. The multi-MPPT system uses a separate converter and MPPT for each floating sub-array, increasing the overall energy harvest under partial shading conditions. In the master-slave approach, the controller module is always on. It commands the slave modules to switch on when more power is available from the array, which maximizes inverter efficiency in low-insolation environments.
As central inverters are used for utility-scale applications, they should produce the same voltage and frequency as that of the electric grid where they are used. As there are a lot of different electric grid standards worldwide, manufacturers are allowed to customize these parameters to match the specific requirements in terms of the number of phases; most central inverters manufactured are three-phase inverters.
In January 2022, Sungrow launched its new 1+X central modular inverter with an output capacity of 1.1MW at the World Future Energy Summit in Abu Dhabi. This 1+X modular inverter can be combined into eight units to reach a power of 8.8MW and features a DC/ESS interface for the connection of energy storage systems (ESS).
Therefore, the growing demand for electricity, the government's efforts to decarbonize the power sector, and the declining costs of central inverters are expected to drive the segment's growth during the forecast period.
Asia-Pacific dominated the solar PV inverter market in 2021, and it is expected to continue its dominance over the coming years. Most of the demand is expected to come from China, which is also the largest producer of solar energy in the world.
There has been an increased emphasis on solar inverters in China, providing a zero-voltage ride through (ZVRT) scheme. To meet the scheme norms, the solar PV power plants must continue to operate without breaking. This is even more significant as the country hosts the largest amount of solar power generation in the world.
With the rising concerns over pollution across the world due to industrialization, especially in Asia-Pacific, regional solar power generation gained considerable momentum. As part of the Paris Agreement commitments, the Government of India set an ambitious target of achieving 175 GW of renewable energy capacity by 2022. Out of the 175 GW, 100 GW was earmarked for solar capacity with 40 GW (40%), which was expected to be achieved through decentralized and rooftop-scale solar projects. To achieve this huge target, the government launched several new programs in 2019, like the solar rooftop phase-2, PM-KUSUM, and the development of ultra mega renewable energy power parks (UMREPPs).
India's solar potential is more than 750 GW, and the country's energy security scenario 2047 shows a possibility of achieving around 479 GW of solar PV installed capacity by 2047. Solar power in India, bestowed with high solar irradiance, has already achieved grid parity that encourages the adoption of solar power as a mainstream energy source, pushing forward the capacity installations in the utility-scale and rooftop solar segments.
As of November 2021, Sungrow Power Supply Co. Ltd has shipped more than 10 GW of solar inverters in India since 2014. This is due to the increased demand for solar energy across the country. In March 2022, Sungrow increased its fab capacity in India to 10GW/annum capacity. Such a large development in the manufacturing sector is expected to boost the growth of the market studied during the forecast period.
Therefore, with various government initiatives launched by China, India, Malaysia, etc., Asia-Pacific is expected to dominate the solar PV inverter market during the forecast period.
The solar PV inverters market is fragmented in nature. Some of the major players in the market (in no particular order) include FIMER SpA, Schneider Electric SE, Siemens AG, Mitsubishi Electric Corporation, and Omron Corporation.