デフォルト表紙
市場調査レポート
商品コード
1643075

英国の3Dプリンティング-市場シェア分析、産業動向と統計、成長予測(2025年~2030年)

United Kingdom 3D Printing - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)


出版日
ページ情報
英文 100 Pages
納期
2~3営業日
カスタマイズ可能
適宜更新あり
価格
価格表記: USDを日本円(税抜)に換算
本日の銀行送金レート: 1USD=150.69円
英国の3Dプリンティング-市場シェア分析、産業動向と統計、成長予測(2025年~2030年)
出版日: 2025年01月05日
発行: Mordor Intelligence
ページ情報: 英文 100 Pages
納期: 2~3営業日
GIIご利用のメリット
  • 全表示
  • 概要
  • 目次
概要

英国の3Dプリンティング市場規模は、2025年に7億4,000万米ドルと推定され、予測期間(2025~2030年)のCAGRは11.7%で、2030年には12億8,000万米ドルに達すると予測されています。

United Kingdom 3D Printing-Market-IMG1

英国の3Dプリンティング市場が成長しているのは、アディティブマニュファクチャリングを利用する産業が増え、より高い能力を持つプリンターに多くの資金が費やされ、技術が向上し、政府の施策が改善されているからです。

主要ハイライト

  • 3Dプリンティングの焦点は、デザインやプロトタイピングから価値あるアイテムの製造へとシフトしています。従来の製造技術とは対照的に、3Dプリンティングは金型を必要としないため、金型コストの高さなど様々な障害を克服することができます。従来の製造は1個あたりのコストは低いが、初期の金型費用が高く、少量生産は割高になります。3Dプリンティングは、コンポーネントを層ごとに構築することで、製造プロセスで発生する廃棄物の量を減らすことができます。3Dプリンティングが従来の製造よりも優れているもう1つのセグメントは、特に短納期の大量カスタマイズです。
  • 3Dプリンティングが企業や消費者に包括的かつ拡大する技術的・経済的メリットをもたらすにつれ、製造プロセスのパラダイムは、金型や低コストの人件費に制約された集中型工場での大量生産から、分散型製造による大量パーソナライゼーションへと変化しています。そのため、ほとんどすべてのセグメントで採用が進んでいます。最近、Rolls-Royceは3Dプリンティングで製造された最も重要な金属部品を発表しました。これはトレントXWB-97航空機エンジンの部品です。
  • 過去5年間、研究開発への投資が増加したことで、技術革新が促進され、3Dプリンティングの需要が高まった。政府は、ブレグジット後の英国経済に生命線を提供するとして、世界の3Dプリンティング市場における市場シェアを5%から2025年には8%に拡大するため、2億米ドル以上を積層造形に投資しました。
  • さらに、COVID-19の大流行により、世界中で2万5,000人以上が感染し、1万7,000人以上が死亡しています。英国だけでも1,000人以上が感染しており、フェイスマスクのような重要な防護具が不足しています。多くの3Dプリンター企業が、フェイスマスクの製造に積層造形法を用いることで問題を解決しようとしています。すでに何千枚もの3Dプリンティングマスクを製造し、病院、薬局、救急隊員、社会福祉施設などに寄贈している企業もあります。さらに、英国の3DCrowdグループは、緩和医療の医師であるジェームズ・コクソンによって設立され、パンデミックのために使用されるGoFundMeのクラウドファンディング・キャンペーンを通じて4万米ドルを集めました。現在までに、同グループは希望資金の半分を集めることに成功しています。
  • しかし、試作手順に関する中小企業にありがちな誤解が、積層造形の採用を妨げています。設計に携わる企業、特に中小企業は、試作の長所と短所を把握しようとする前に、試作投資が良い投資かどうかを考えています。こうした企業の典型的な考え方は、プロトタイピングは製造前の高価なステップに過ぎないというものです。プロトタイプに対する誤解、技術的知識の不足、伝統的プロセス管理の欠如は、すべて市場の成長を鈍らせる可能性が高いです。

英国の3Dプリンティング市場動向

産業用3Dプリンターの需要拡大

  • 産業用3Dプリンターは、治具や冶具から最終的な工具に至るまで、英国で長年確立されてきた製造業を根底から覆そうとしています。企業は、従来の方法の数分の一のコストで特殊で少量の装置や治具を製造できるようになり、設計者やエンジニアの時間をより収益性の高いプロジェクトに充てることができます。大規模で国際的な製造業者は、ショッピングモールの小規模な製造業者と同じメリットをプロ仕様の3Dプリンターから得ることができるようになりました。これは、ダウンタイムを削減する一方で、業務の改善とスピードアップに役立ちます。
  • 英国商務省によると、昨年、英国には約551万社の民間企業があり、そのうち約91万4,475社が建設業、約76万2,480社が専門・科学技術業でした。多くの企業が、産業用3Dプリンティングの参入企業が市場シェアを獲得するために新製品を開発する機会を創出すると考えられます。
  • 自動車産業は積層造形技術をリードしており、Audiなどの有名企業が3Dプリンターを使用しています。世界のAudiだけでなく、各自動車メーカーのレーシングカーチームやOEMメーカーも3Dプリンターを使用しています。自動車メーカーが3Dプリンターを最も早く導入したのは、製造を支援するための治具や工具を作成するためでした。自動車産業で最もよく印刷される部品は、治具、クレードル、試作品です。これらの製品は、頑丈で耐久性があり、長持ちしなければならないです。
  • カスタマイズ性から軽量化まで、いくつかの特性が優れたロボット部品となり、3Dプリンティング機能をうまく補完します。製造にはコストがかかり、多様な用途に対応するグリッパーやセンサマウントなどの部品には特殊な設計が必要です。ロボット工学の専門家は、グリッパーフィンガーからロボット部品全体に至るまで、アーム終端ツールや最終用途の部品に3Dプリンタを使用して、製品の総重量を軽減し、ツールがより速く動き、より重い荷重を運搬できるようにしています。
  • 顧客のさまざまな要求に応えるため、各社はさまざまな産業グレードの3Dプリンターを提供しています。例えば、StratasysはFortus 450mc Industrial FDM 3Dプリンター、F900 Industrial 3Dプリンターなどを提供しています。StratasysのFDM 3Dプリンターは、最高の精度、速度、多様な熱可塑性材料を備えています。

医療産業は予測期間に大きな成長を遂げる

  • 3Dプリンティングアプリケーションは医療セグメントで急速に拡大しており、医療に革命をもたらすと期待されています。医療産業では、組織や臓器の製造、カスタマイズ型人工装具、インプラント、解剖学的モデル、ドラッグの剤形やデリバリー、発見に関連する製薬研究など、いくつかの幅広いカテゴリーで3Dプリンティングが使用されています。医療製品、医薬品、機器のカスタマイズやパーソナライゼーション、費用対効果、効率的な生産性など、いくつかの利点があります。国家統計局によると、英国の医療支出は昨年約2,900億米ドルに上った。
  • 3Dプリンティングされ、パーソナライズされ、より優れた性能を持つインプラントのニーズが急増しているため、病院や組織が協力して3Dプリンターを提供したり、医療専門家に機器を開発するためのトレーニングを提供したりしています。例えば、医療製造サービスプロバイダーであるAxial3は、英国のNewcastle Hospitalsと提携し、現場の3Dプリンティングラボを提供しています。このラボは、主に整形外科と脊椎外科で医師が使用し、術前計画のために患者固有のモデルをプリントします。
  • 3Dプリンティングが提供する設計の柔軟性が、より高い性能を持つ3Dプリンティングインプラントの需要を促進しています。インプラントは多孔質の表面構造で設計できるため、生きた骨と人工インプラントの一体化がより速く進みます。3DLifePrintは、120万米ドルの投資を獲得し、病院やクリニックにわたる組み込み医療用3Dプリンティングハブのポートフォリオを拡大し、研究開発を継続するために生物医療エンジニアと3D技術者を追加採用しました。
  • 最新の人工装具を製造するために3Dプリンティングの応用を拡大することで、コストが削減され、ユーザーの間でその適応が急増しています。英国では、切断や先天性四肢欠損で専門リハビリテーションサービスセンターに通う患者の数は約6万人と推定されています。英国のNHSは、リハビリテーションサービスに年間約6,000万米ドルを費やしています。このことから、英国の医療セグメントにおける3Dプリンティング市場に大きな機会があることがわかる。
  • さらに、バース大学とブリストル大学の研究チームは、超音波を活用して3Dバイオプリンティング技術を開発しました。この新しいアプローチでは、複数の超音波定在波を重ね合わせて制御可能な音響放射力を発生させ、空気中の液滴を正確なプールに集積させることで、ユニークな生体材料の微細構造を迅速に生成・変更できるようにしました。

英国の3Dプリンティング産業概要

英国の3Dプリンティング市場は競争が激しく、Renishaw PLC、Stratasys Limited、EOS GmbH、Materialise NV、AnisoPrintなどの大手企業が独占しています。圧倒的な市場シェアを誇るこれらの大手企業は、海外における顧客基盤の拡大に注力しています。これらの企業は、市場シェアと収益性を高めるために戦略的な共同イニシアティブを活用しています。しかし、技術の進歩や製品の革新に伴い、中堅・中小企業は新規契約の獲得や新市場の開拓によって市場での存在感を高めています。

2022年10月:Fieldmade ASとMark3D UKは、Mark3D UKが英国でFieldmade Nomad LWポータブル3Dプリンターを独占販売する戦略的提携を発表しました。この発表は、MarkforgedをベースとしたFieldmade Nomad LWシリーズの供給、サポート、サービスにおける市場アプローチに大きな転換をもたらすものです。

2022年5月:連続繊維3Dプリンティングソリューションを提供するAnisoprintは、国際宇宙ステーション(ISS)の商業利用に携わる民間宇宙サービス企業Nanoracks Space Outpost Europeと覚書を締結し、宇宙技術開発者としての地位を強化し、地球低軌道(LEO)と月経済諸国への参入を目指します。Anisoprintは、連続繊維3Dプリンティング技術を微小重力環境に適応させるため、ESRICのスタートアップ支援プログラムのプレインキュベーションに選ばれた後、リソースネットワークの拡大に向けて大きな成果を上げています。

その他の特典

  • エクセル形式の市場予測(ME)シート
  • 3ヶ月間のアナリストサポート

目次

第1章 イントロダクション

  • 調査の成果
  • 調査の前提
  • 調査範囲

第2章 調査手法

第3章 エグゼクティブサマリー

第4章 市場力学

  • 市場概要
  • 市場促進要因
    • 政府施策の好ましい変化
    • 産業用3Dプリンターの需要拡大
  • 市場抑制要因
    • 価格競争と競合価格の高騰
  • バリューチェーン/サプライチェーン分析
  • ポーターのファイブフォース分析
    • 新規参入業者の脅威
    • 買い手/消費者の交渉力
    • 供給企業の交渉力
    • 代替品の脅威
    • 競争企業間の敵対関係の強さ
  • COVID-19の産業への影響評価

第5章 市場セグメンテーション

  • プリンタータイプ
    • 産業用
    • デスクトップ
  • 材料タイプ
    • 金属
    • プラスチック
    • セラミック
    • その他
  • 用途
    • 自動車
    • 航空宇宙・防衛
    • 医療
    • 建築・アーキテクチャ
    • その他

第6章 競合情勢

  • 企業プロファイル
    • Renishaw PLC
    • Stratasys Limited
    • EOS GmbH
    • Materialise NV
    • AnisoPrint
    • Nexa 3D Inc.
    • Protolabs
    • HP Development Company LP
    • GE Additives

第7章 投資分析

第8章 市場機会と今後の動向

目次
Product Code: 69605

The United Kingdom 3D Printing Market size is estimated at USD 0.74 billion in 2025, and is expected to reach USD 1.28 billion by 2030, at a CAGR of 11.7% during the forecast period (2025-2030).

United Kingdom 3D Printing - Market - IMG1

The 3D printing market in the UK is growing because more industries are using additive manufacturing, more money is being spent on printers with higher capacities, technology is getting better, and government policies are getting better.

Key Highlights

  • The focus of 3D printing has shifted from design and prototyping to manufacturing valuable items. In contrast to traditional manufacturing techniques, 3D printing does not require tooling; thus, it can help overcome various obstacles, such as high tooling costs. Although conventional manufacturing has lower per-unit costs, the initial tooling expenses are high, making low-volume manufacturing more expensive. By building components layer by layer, 3D printing reduces the amount of waste generated during the manufacturing process. Another area where 3D printing is better than traditional manufacturing is mass customization, especially for short production runs.
  • As 3D printing presents companies and consumers with a comprehensive and expanding range of technical and economic benefits, it has changed the paradigm for manufacturing processes from mass production in centralized factories constrained by tooling and low-cost labor rates to mass personalization with distributed manufacture. It has fueled its adoption in almost every sector. Recently, Rolls-Royce unveiled the most significant metal part made by 3D printing, which is a component for a Trent XWB-97 aircraft engine.
  • Over the past five years, increased investment in research and development has encouraged innovation and boosted demand for 3D printing. The government has invested over USD 200 million into additive manufacturing to increase its market share from 5% to 8% in 2025 in the 3D printing market worldwide as it offers a lifeline to the British economy after Brexit.
  • Moreover, the COVID-19 outbreak has infected more than 25 lakh people worldwide and caused more than 1.7 lakh fatalities. More than one lakh people are affected in the United Kingdom alone, resulting in a scarcity of critical protective equipment such as face masks.Many 3D-printer organizations are trying to resolve the problem by using an additive manufacturing method to produce facemasks. Some companies have already produced thousands of 3D-printed masks that are donated to hospitals, pharmacies, paramedics, and social-care homes. Further, the 3DCrowd UK group was set up by palliative-medicine doctor James Coxon to raise USD 40,000 through a GoFundMe crowdfunding campaign that will be used for the pandemic. Up until now, the group has successfully raised half the desired funds.
  • However, small and medium-sized firms' common misconceptions about prototype procedures are impeding the adoption of additive manufacturing. Companies involved in the design, especially small and medium-sized businesses, are thinking about whether prototyping investments are good investments before trying to figure out what the pros and cons of the prototype are. The typical belief among these businesses is that prototyping is only an expensive step before manufacturing. Misconceptions about prototypes, a lack of technical knowledge, and a lack of traditional process controls are all things that are likely to slow the growth of the market.

United Kingdom 3D Printing Market Trends

Growing Demand for Industrial-grade 3D Printers

  • Industrial 3D printers are upending the long-established manufacturing industry in the United Kingdom, from jigs and fixtures to final tooling. Companies may now build specialized, low-volume equipment and fixtures for a fraction of the cost of traditional methods, freeing up designers' and engineers' time for more profitable projects. Large, international manufacturers can now get the same benefits from a professional 3D printer as small manufacturers in a mall. This helps to improve and speed up operations while cutting down on downtime.
  • According to the UK Department for Business, in the last year, there were around 5.51 million private sector enterprises in the United Kingdom, with approximately 914,475 of them being construction businesses and 762,480 being professional, scientific, and technological businesses. Many companies would create an opportunity for industrial 3D printing players to develop new products to capture market share.
  • The automobile industry has led the way in additive manufacturing, with renowned firms such as Audi using 3D printers. Not only are the Audis of the world using 3D printers, but race car teams and original equipment manufacturers from every automaker are also. The earliest application of 3D printing for vehicle manufacturers was to create fixtures and tools to aid manufacturing. The most common parts printed by the vehicle industry are fixtures, cradles, and prototypes. These products must be solid, durable, and long-lasting.
  • Several properties, ranging from customizability to reduced weight, make excellent robotics parts and complement 3D printing capabilities nicely. It is costly to manufacture and requires specialized designs for components such as grippers and sensor mounts for diverse applications. Robotics professionals use 3D printers for end-of-arm tooling and end-use parts ranging from gripper fingers to whole robot components to reduce total product weight and enable tools to move faster and carry heavier loads.
  • To meet the various demands of the customer, the firms are providing various industrial-grade 3D printers. For example, Stratasys provides the Fortus 450mc Industrial FDM 3D Printer, the F900 Industrial 3D Printer, and many more. Stratasys FDM 3D Printers have the highest accuracy, speed, and variety of thermoplastic materials.

Healthcare Industry will Experience Significant Growth in Forecast Period

  • 3D printing applications are expanding rapidly in the medical sector and are expected to revolutionize health care. The medical industry uses 3D printing in several broad categories, including tissue and organ fabrication, customized prosthetics, implants, anatomical models, and pharmaceutical research related to drug dosage forms, delivery, and discovery. It provides several benefits, such as customization and personalization of medical products, drugs, and equipment, cost-effectiveness, and efficient productivity. According to the national statistics office, healthcare expenditure in the UK accounted for approximately USD 290 billion last year.
  • The surging need for 3D-printed, personalized, and better-performing implants has fueled the collaboration of hospitals and organizations to offer 3D printers and training to health professionals to develop the devices. For example, Axial3, a medical manufacturing service provider, has partnered with Newcastle Hospitals in England to provide an on-site 3D printing lab that practitioners will primarily use in orthopedics and spinal surgery to print patient-specific models for presurgical planning.
  • The design flexibility offered by 3D printing is driving the demand for 3D-printed implants with higher performance. Implants can be designed with porous surface structures, which facilitates faster integration between a living bone and the artificial implant. The 3DLifePrint has secured an investment of USD 1.2 million to expand its portfolio of embedded medical 3D printing hubs across hospitals and clinics and to recruit additional bio-medical engineers and 3D technologists to continue research and development.
  • Increasing the application of 3D printing to produce modern prosthetics has decreased costs and surged its adaptation among users. The number of patients with an amputation or congenital limb deficiency attending specialist rehabilitation service centers in the United Kingdom is estimated to be around 60,000. The NHS in England spends about USD 60 million per year on rehabilitation services.This reveals the tremendous opportunity for the 3D printing market in the healthcare segment of the United Kingdom.
  • Further, a team of researchers from the University of Bath and the University of Bristol leveraged ultrasound to develop a 3D bioprinting technique. The new approach superimposed several ultrasonic standing waves to generate controllable acoustic radiation forces that could direct airborne droplets to accumulate into precise pools, enabling unique biomaterial microarchitectures to be produced and modified rapidly.

United Kingdom 3D Printing Industry Overview

The United Kingdom 3D printing market is competitive and is dominated by significant players like Renishaw PLC, Stratasys Limited, EOS GmbH, Materialise NV , and AnisoPrint. With a prominent market share, these major players focus on expanding their customer base across foreign countries. These companies leverage strategic collaborative initiatives to increase their market share and profitability. However, with technological advancements and product innovations, mid-size to smaller companies are growing their market presence by securing new contracts and by tapping new markets.

October 2022: Fieldmade AS and Mark3D UK have announced a strategic collaboration arrangement to see Mark3D UK exclusively sell Fieldmade Nomad LW portable 3D printers in the UK. The announcement marks a significant shift in the go-to-market approach for the Markforged-based Fieldmade Nomad LW range's supply, support, and servicing.

May 2022: Anisoprint, a provider of continuous fiber 3D printing solutions, has signed a memorandum of understanding (MOU) with Nanoracks Space Outpost Europe, a private in-space services company involved in the commercial utilization of the International Space Station (ISS), to strengthen its position as a space technology developer and enter the low-Earth orbit (LEO) and lunar economies. Anisoprint has made significant gains toward growing the resources network after being selected for pre-incubation in ESRIC's Startup Support Program to adapt continuous fiber 3D printing technology for microgravity settings.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Deliverables
  • 1.2 Study Assumptions
  • 1.3 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Favorable Changes in Government Policies
    • 4.2.2 Growing Demand for Industrial-grade 3D Printers
  • 4.3 Market Restraints
    • 4.3.1 High Price Competition and High Commodity Prices
  • 4.4 Value Chain / Supply Chain Analysis
  • 4.5 Porter's Five Forces Analysis
    • 4.5.1 Threat of New Entrants
    • 4.5.2 Bargaining Power of Buyers/Consumers
    • 4.5.3 Bargaining Power of Suppliers
    • 4.5.4 Threat of Substitute Products
    • 4.5.5 Intensity of Competitive Rivalry
  • 4.6 Assessment of COVID-19 Impact on the Industry

5 MARKET SEGMENTATION

  • 5.1 Printer Type
    • 5.1.1 Industrial
    • 5.1.2 Desktop
  • 5.2 Material Type
    • 5.2.1 Metal
    • 5.2.2 Plastic
    • 5.2.3 Ceramics
    • 5.2.4 Other Material Types
  • 5.3 Application
    • 5.3.1 Automotive
    • 5.3.2 Aerospace and Defense
    • 5.3.3 Healthcare
    • 5.3.4 Construction and Architecture
    • 5.3.5 Other Applications

6 COMPETITIVE LANDSCAPE

  • 6.1 Company Profiles
    • 6.1.1 Renishaw PLC
    • 6.1.2 Stratasys Limited
    • 6.1.3 EOS GmbH
    • 6.1.4 Materialise NV
    • 6.1.5 AnisoPrint
    • 6.1.6 Nexa 3D Inc.
    • 6.1.7 Protolabs
    • 6.1.8 HP Development Company LP
    • 6.1.9 GE Additives

7 INVESTMENT ANALYSIS

8 MARKET OPPORTUNITIES AND FUTURE TRENDS