航空宇宙用バルブ市場レポート：動向、予測、競合分析 (2031年まで)

世界の航空宇宙用バルブ市場の将来は、OEMとアフターマーケットにおける機会で有望視されています。世界の航空宇宙用バルブ市場は、2025年から2031年までのCAGRが4.5%で、2031年までに推定182億米ドルに達すると予想されています。この市場の主な促進要因は、航空機の納入台数の増加、航空宇宙用バルブの交換回数の減少、旅客数の増加、航空会社の大半が軽量バルブを求めていることです。

• Lucintelの予測によると、用途別では、重要な安全機能があり、その広範なサブシステムに航空宇宙用バルブが利用されているため、環境制御システムセグメントが予測期間中最大のセグメントであり続けるといいます。
• 最終用途産業カテゴリーではOEMが、特に軍事用途での航空機需要の増加により、航空宇宙用バルブの設置が増加すため、より高い成長を遂げると予想されます。
• 地域別では、北米は主要なバルブメーカーと航空機メーカーが存在し、需要の増加と技術の進歩が相まって、予測期間中最大の地域であり続けると思われます。

航空宇宙用バルブ市場の戦略的成長機会

航空宇宙用バルブ市場の戦略的成長機会は、技術の成長と航空宇宙システムの性能要求の成長に伴い、アプリケーション全体に広がっています。

• 商業航空宇宙での拡大民間航空宇宙分野の拡大により、バルブ技術向上の可能性が出てきています。効率的で信頼性の高い民間航空機のグロスとより良いバルブの需要が必要です。
• 宇宙開発の成長：宇宙開発産業の増加により、高温や低温に耐えられるバルブが期待されています。この市場では、高い運用効果を持つ宇宙船や人工衛星用のバルブが必要とされています。
• 軍事航空宇宙の進歩：軍用航空宇宙分野の進歩に伴い、軍用に使用されるより高度なバルブの入手が望まれています。そのような軍用レベルの用途のために、非常に高い強度と信頼性を持つバルブを作る余地があります。
• 都市型エアモビリティの開発：電動垂直離着陸機のような航空機で構成される都市型航空モビリティソリューションの成長は、設計中のこれらの新しいシステムに合わせて調整された高度なバルブ技術の成長の可能性を提供します。
• 持続可能な航空への注力：低負荷の航空技術の設計が重視されるようになっているため、持続可能な航空バルブが強く求められています。低排出ガスや燃費向上という目標の実現に役立つバルブを設計する余地があります。

このような戦略的成長機会は航空宇宙用バルブ市場に革命をもたらし、新製品は商業、宇宙、軍事、グリーン航空技術の必要性によって推進されています。

航空宇宙用バルブ市場促進要因・課題

航空宇宙用バルブ市場は、技術、経済、規制などの要因を含む市場促進要因・課題といった様々な市場の下で運営されています。市場の動向を追う際には、これらの問題を十分に考慮する必要があります。

航空宇宙用バルブ市場を牽引する要因は以下の通りである：

• 高度な航空宇宙システムに対する需要の増加：高度な航空宇宙システムに対する需要の増加：高度な性能という観点から、航空宇宙システムに対する高い需要が高度なバルブ技術を要求しています。この動向はまた、寸法と信頼性において強化されたシステムコンポーネントへのニーズの高まりを促しています。
• 技術進歩：スマートバルブ制御や軽量なバルブ材料などの新しいバルブ技術は、それぞれ性能と効率を向上させています。これらの要因が市場の成長を助け、競争力の問題に対処しています。
• 民間・軍事航空宇宙の成長：民間および軍事分野の増加は、高度なバルブソリューションに大きな市場を提供します。このような拡大には、より優れたバルブ技術が必要です。
• 環境保護の重視：航空ビジネスにおける環境に優しい実践への注目は、環境に優しいバルブソリューションへの要求を高めています。このような焦点は、世界の環境持続可能性への願望と一致しており、市場の魅力を高めています。
• 研究開発投資：研究開発費の増加は、バルブ業界における新しいアイデアと技術開発に貢献しています。R&Dと市場との接触は、成長のために大きな効果を発揮します。

航空宇宙用バルブ市場における課題は以下の通り：

• 高い生産コスト：先進的な航空宇宙用バルブは、開発・設計から流通に至るまで効果的にコストがかかります。競争力と収益性を高めるためには、製造コストの管理が不可欠です。
• 規制遵守：複雑な規制システムを利用するのは面倒なことです。市場への参入や製品の開発段階において、航空宇宙規格や規制への準拠は避けて通れません。
• 技術の複雑さ：バルブ技術の高度化は、そのようなバルブの設計、使用、設置における課題の決定要因です。このような障害を克服することは、市場の業績にとって重要です。
• サプライチェーンの混乱：材料不足やその他の物流の問題から生じる問題は、商品の生産や流通に関連しています。サプライチェーンの管理は、市場の地域にとって極めて重要です。
• 競合による圧力：特に航空宇宙用バルブの市場では、厳しい競争により価格設定や市場シェアについてプレッシャーがかかります。独自の製品を開発し、優れた技術を獲得することは、競争圧力に対処する上で重要な役割を果たします。

目次

第1章 エグゼクティブサマリー

第2章 世界の航空宇宙用バルブ市場：市場力学

• イントロダクション、背景、分類
• サプライチェーン
• 業界の促進要因と課題

第3章 市場動向と予測分析 (2019年～2031年)

• マクロ経済動向 (2019～2024年) と予測 (2025～2031年)
• 世界の航空宇宙用バルブ市場の動向 (2019～2024年) と予測 (2025～2031年)
• 世界の航空宇宙用バルブ市場：機種別
  • 固定翼機
  • 回転翼機
  • 無人航空機
• 世界の航空宇宙用バルブ市場：材料別
  • ステンレス鋼
  • チタン
  • アルミニウム
• 世界の航空宇宙用バルブ市場：最終用途産業別
  • OEM (メーカー)
  • アフターマーケット
• 世界の航空宇宙用バルブ市場：用途別
  • 燃料システム
  • 油圧システム
  • 環境制御システム
  • 空気圧システム
  • 潤滑システム
  • 水道・廃水処理システム
  • その他

第4章 地域別の市場動向と予測分析 (2019年～2031年)

• 世界の航空宇宙用バルブ市場：地域別
• 北米の航空宇宙用バルブ市場
• 欧州の航空宇宙用バルブ市場
• アジア太平洋の航空宇宙用バルブ市場
• その他地域の航空宇宙用バルブ市場

第5章 競合分析

• 製品ポートフォリオ分析
• 運用統合
• ポーターのファイブフォース分析

第6章 成長機会と戦略分析

• 成長機会分析
  • 世界の航空宇宙用バルブ市場の成長機会：機種別
  • 世界の航空宇宙用バルブ市場の成長機会：材料別
  • 世界の航空宇宙用バルブ市場の成長機会：最終用途産業別
  • 世界の航空宇宙用バルブ市場の成長機会：用途別
  • 世界の航空宇宙用バルブ市場の成長機会：地域別
• 世界の航空宇宙用バルブ市場の新たな動向
• 戦略的分析
  • 新製品の開発
  • 世界の航空宇宙用バルブ市場の生産能力拡大
  • 世界の航空宇宙用バルブ市場における企業合併・買収 (M&A)、合弁事業
  • 認証とライセンシング

第7章 主要企業のプロファイル

• Eaton
• Safran
• Woodward
• Triumph
• Parker Hannifin

The future of the global aerospace valve market looks promising with opportunities in the OEM and aftermarkets. The global aerospace valve market is expected to reach an estimated $18.2 billion by 2031 with a CAGR of 4.5% from 2025 to 2031. The major drivers for this market are an increase in aircraft deliveries as well as a decline in aerospace valve replacement rotations and growth in passenger volume and the majority of airlines requirements for lightweight valves.

• Lucintel forecasts that, within the application category, the environmental control system segment will remain the largest segment over the forecast period due to critical safety functions, utilizing aerospace valves in its extensive subsystems.
• Within the end use industry category, OEM is expected to witness higher growth due to rising demand for aircraft, especially in military applications, driving increased aerospace valve installations.
• In terms of region, North America will remain the largest region over the forecast period due to the presence of major valve and aircraft manufacturers, coupled with increasing demand and technological advancements.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Aerospace Valve Market

The engineering offerings of the enhanced technologies in the aerospace valve market are changing the dynamics of the sector. Such trends represent the transformation of the sector in lapsing demands and growing technologies.

• Integration of Smart Technologies: There is a rise in the adoption of smart valves which can be integrated with sensors and digital control valves. The deployment of these technologies allows monitoring and control of systems subcomponents in real-time resulting in better operating systems.
• Focus on Lightweight Materials: There is an increasing incorporation of new generations of advanced lightweight materials, and composites together with titanium alloys. Such materials lower the overall weight of components which helps in enhancing the fuel consumption and the performance of aerospace systems.
• Advancements in Miniaturization: Such miniaturization of designs of valves is easier to produce since they will be installed in denser and more complicated aerospace systems. This trend propels the need for higher-performance components in such volumetrically constrained regions.
• Emphasis on Sustainability: It also explains why the industry is paying a lot of attention to creating greener manufacturing practices and materials. Such trends please target all environmental objectives and make the market more attractive.
• Enhanced Testing and Simulation Techniques: More recent testing and simulation techniques are being employed to validate valve performance capacity under vigorous working conditions. Such breakthroughs aid in the creation of more dependable and robust aerospace resources.

All these factors are leading to the restructuring of the aerospace valve market in such a way that new solutions are being developed that focus on better performance, higher efficiency, and lower environmental impact. The industry dynamics are changing with the emergence of smart technologies, new materials, and testing methods.

Recent Developments in the Aerospace Valve Market

The market of aerospace valves is marked by the emergence of new technology, better materials, and new manufacturing methods. These developments are geared towards increasing the performance and reliability, as well as the efficiency of the end products.

• Emergence of Smart Valves: There is an emergence of smart valves, which have in-built sensors, and when the LM makes active use of them. Such valves provide accurate prediction and control to achieve better performance and reliability for the entire system.
• Modernization of Lightweight Materials: Lightweight materials are increasingly being utilized including composites and advanced alloy materials. These materials help in weight reduction and consequently improve the fuel efficiency of aerospace structures.
• Introduction of New Testing Procedures: There are new valve testing procedures brought in on-site developed for assurance of valve function in performance testing at extreme temperatures. These procedures assist the engineers in coming up with stronger and more dependable components for aerospace devices.
• Assurance of Enhanced Manufacturing Processes: Technologies such as 3D printing and automation are being employed in the valve manufacturing process to improve accuracy as well as efficiency of the entire process. These new technologies allow more sophisticated structure designs and also allow less production expenses.
• Focus on Miniaturization: The trend of developing miniaturized valve components in aerospace systems is getting validated. This trend supports the need for high-performance components in space-constrained environments.

These developments are changing the dynamics of the aerospace valve market in a big way with regards to the designs of smart technologies, materials, new testing and manufacturing processes, which all lead to efficient performance.

Strategic Growth Opportunities for Aerospace Valve Market

Strategic growth opportunities in the aerospace valve market are broadening up across the application with the growth of technology and growth in the performance requirement of aerospace systems.

• Expansion in Commercial Aerospace: With the enlarging commercial aerospace segment, there come possibilities for bettering valve technologies. The demand for efficient and dependable commercial aircraft grosses and better valves are necessary.
• Growth in Space Exploration: The increasing space exploration industry leads to prospects in valves manufactured to withstand high and low temperatures. This market needs valves for spacecraft and satellites with high operational effectiveness.
• Advancements in Military Aerospace: In the advancement of military aerospace, there is a wish to obtain higher-level valves for military applications. There is a scope in making such kinds of valves that have a very high strength and reliability for military-level applications.
• Development of Urban Air Mobility: The growth of urban air mobility solutions comprising aircraft like electric vertical takeoff and landing offers potential for growth of advanced valve technologies ever tailored for these new systems under design.
• Focus on Sustainable Aviation: Because of the increased emphasis on the design of low-impact aviation technologies, a sustainable aviation valve is in high demand. There is room to design valves that will help realize the targets of lower emissions as well as better fuel economy.

These strategic growth opportunities are revolutionizing the aerospace valve market, with new products being driven by the need for commercial, space, military, and green aviation technologies.

Aerospace Valve Market Driver and Challenges

The aerospace valve market operates under a variety of markets such as drivers as well as those marked as challenges which include factors such as technology, economy, regulation and etc. These issues should be well taken into consideration when aiming to follow the market's trends.

The factors responsible for driving the aerospace valve market include:

• Increasing Demand for Advanced Aerospace Systems: With the perspective of advanced performance, the high demand for aerospace systems dictates advanced valve technologies. This trend also encourages the growing need for enhanced system components in dimensions and reliability.
• Technological Advancements: Emerging valve technology such as the smart valve control and valve materials which are light in weight, are improving performance and efficiency respectively. These factors assist in the growth of the market and address issues of competitiveness.
• Growth of Civil and Military Aerospace: The increase in the commercial and military sectors provides larger markets for advanced valve solutions. Such expansion necessitates better valve technologies.
• Focus on Environmental Protection: The attention towards environmentally friendly practices in the aviation business is increasing requirements for green valve solutions. This focus is consistent with the environmental sustainability desires worldwide and increases market attractiveness.
• R&D investments: More expenditures on research and development contribute to new ideas and technology development within the valve industry. R&D and market contact work wonders for growth.

Challenges in the aerospace valve market are:

• High Production Costs: Advanced aerospace valves cost money effectively both in the development and design and even in distribution. Managing production costs remains essential for competitiveness and profitability.
• Regulatory Compliance: Navigating complex regulatory systems can be cumbersome. Compliance with aerospace standards and regulations is unavoidable for entry to the market and developmental stages of the product.
• Technological Complexity: The increase in the sophistication of valve technologies is a determinant in the challenges of the design, use, and installation of such valves. It is significant for the performance of the market to overcome such obstacles.
• Supply Chain Disruptions: Problems arising from material shortages and other logistical problems are correlated to the production or distribution of the goods. Management of supply chains is critical to the geography of the market.
• Competitive Pressure: Pressure is placed in the markets of aerospace valves in particular about pricing and market shares due to stiff competition. Developing unique products and acquiring superior technology plays a critical role in addressing competitive pressure.

The drivers and challenges in the aerospace valve market further underline the business opportunities in commercializing technologies and the consequences of ignoring investment or adherence to regulations. Focusing on these issues is critical for development and effectively coping with the complexity of the market.

List of Aerospace Valve Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. through these strategies aerospace valve companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the aerospace valve companies profiled in this report include-

• Eaton
• Safran
• Woodward
• Triumph
• Parker Hannifin

Aerospace Valve by Segment

The study includes a forecast for the global aerospace valve market by aircraft type, material, end use industry, application, and region.

Aerospace Valve Market by Aircraft Type [Analysis by Value from 2019 to 2031]:

• Fixed Wing
• Rotary Wing
• Unmanned Aerial Vehicles

Aerospace Valve Market by Material [Analysis by Value from 2019 to 2031]:

• Stainless Steel
• Titanium
• Aluminum

Aerospace Valve Market by End Use Industry [Analysis by Value from 2019 to 2031]:

• OEM
• Aftermarket

Aerospace Valve Market by Application [Analysis by Value from 2019 to 2031]:

• Fuel System
• Hydraulic System
• Environmental Control System
• Pneumatic System
• Lubrication System
• Water & Wastewater System
• Others

Aerospace Valve Market by Region [Analysis by Value from 2019 to 2031]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Aerospace Valve Market

Major players in the market are expanding their operations and forming strategic partnerships to strengthen their positions. The below image highlights recent developments by major aerospace valve producers in key regions: the USA, China, India, Japan, and Germany.

• United States: To enhance the performance and efficacy of the existing valves developed for the aerospace sector, the US is working towards the use of integrated smart valve technologies and advanced valve materials in their aerospace applications. Some of the innovations are the application of digital control and the use of thin-walled fiber composites to save the system and structure weight.
• China: China is strengthening its aerospace valve production by setting up new factories and pouring more money on R&D. The strategy involves improving valve precision reliability to support the rising local and overseas need for aerospace projects.
• Germany: Germany is at the forefront of developing advanced valves applied in aerospace instrumentations. Progress has been achieved through establishing robust valve testing techniques and utilizing high-performance components suitable for valves under extreme conditions.
• India: Currently, India is developing aerospace valve technology by collaborating with foreign companies and conducting local R&D. The goal is to develop solutions more affordably without compromising the quality and performance of the aerospace systems.
• Japan: Japanese companies have developed aerospace valve technology with embedding openings and sophisticated sensors. These developments target better control accuracy and control systems integration for higher system efficiency in aerospace.

Features of the Global Aerospace Valve Market

Market Size Estimates: Aerospace valve market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.

Segmentation Analysis: Aerospace valve market size by various segments, such as by aircraft type, material, end use industry, application, and region in terms of value ($B).

Regional Analysis: Aerospace valve market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different aircraft type, material, end use industry, application, and regions for the aerospace valve market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the aerospace valve market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the aerospace valve market by aircraft type (fixed wing, rotary wing, and unmanned aerial vehicles), material (stainless steel, titanium, aluminum, and others), end use industry (OEM and aftermarket), application (fuel system, hydraulic system, environmental control system, pneumatic system, lubrication system, water & wastewater system, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Aerospace Valve Market: Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2019 to 2031

• 3.1. Macroeconomic Trends (2019-2024) and Forecast (2025-2031)
• 3.2. Global Aerospace Valve Market Trends (2019-2024) and Forecast (2025-2031)
• 3.3: Global Aerospace Valve Market by Aircraft Type
  • 3.3.1: Fixed Wing
  • 3.3.2: Rotary Wing
  • 3.3.3: Unmanned Aerial Vehicles
• 3.4: Global Aerospace Valve Market by Material
  • 3.4.1: Stainless Steel
  • 3.4.2: Titanium
  • 3.4.3: Aluminum
• 3.5: Global Aerospace Valve Market by End Use Industry
  • 3.5.1: OEM
  • 3.5.2: Aftermarket
• 3.6: Global Aerospace Valve Market by Application
  • 3.6.1: Fuel System
  • 3.6.2: Hydraulic System
  • 3.6.3: Environmental Control System
  • 3.6.4: Pneumatic System
  • 3.6.5: Lubrication System
  • 3.6.6: Water & Wastewater System
  • 3.6.7: Others

4. Market Trends and Forecast Analysis by Region from 2019 to 2031

• 4.1: Global Aerospace Valve Market by Region
• 4.2: North American Aerospace Valve Market
  • 4.2.1: North American Aerospace Valve Market by End Use Industry: OEM and Aftermarket
  • 4.2.2: North American Aerospace Valve Market by Application: Fuel System, Hydraulic System, Environmental Control System, Pneumatic System, Lubrication System, Water & Wastewater System, and Others
• 4.3: European Aerospace Valve Market
  • 4.3.1: European Aerospace Valve Market by End Use Industry: OEM and Aftermarket
  • 4.3.2: European Aerospace Valve Market by Application: Fuel System, Hydraulic System, Environmental Control System, Pneumatic System, Lubrication System, Water & Wastewater System, and Others
• 4.4: APAC Aerospace Valve Market
  • 4.4.1: APAC Aerospace Valve Market by End Use Industry: OEM and Aftermarket
  • 4.4.2: APAC Aerospace Valve Market by Application: Fuel System, Hydraulic System, Environmental Control System, Pneumatic System, Lubrication System, Water & Wastewater System, and Others
• 4.5: ROW Aerospace Valve Market
  • 4.5.1: ROW Aerospace Valve Market by End Use Industry: OEM and Aftermarket
  • 4.5.2: ROW Aerospace Valve Market by Application: Fuel System, Hydraulic System, Environmental Control System, Pneumatic System, Lubrication System, Water & Wastewater System, and Others

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Aerospace Valve Market by Aircraft Type
  • 6.1.2: Growth Opportunities for the Global Aerospace Valve Market by Material
  • 6.1.3: Growth Opportunities for the Global Aerospace Valve Market by End Use Industry
  • 6.1.4: Growth Opportunities for the Global Aerospace Valve Market by Application
  • 6.1.5: Growth Opportunities for the Global Aerospace Valve Market by Region
• 6.2: Emerging Trends in the Global Aerospace Valve Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Aerospace Valve Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Aerospace Valve Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Eaton
• 7.2: Safran
• 7.3: Woodward
• 7.4: Triumph
• 7.5: Parker Hannifin