ごみ圧縮機市場レポート：動向、予測、競合分析 (2031年まで)

世界のごみ圧縮機市場の将来は、住宅、農業、自治体、商業、工業の各市場における機会で有望視されています。世界のごみ圧縮機市場は、2025年から2031年までのCAGRが3.5%で、2031年までに推定5億米ドルに達すると予想されます。この市場の主な促進要因は、環境汚染レベルに対する意識と不安の高まり、先進国と新興国双方のスマートシティ構想の拡大、廃棄物の発生を最小限に抑え埋立地の容量不足に対処しようとする自治体の取り組みなどです。

• 製品種類別では、据置型が予測期間中も最大セグメントを維持するとLucintelは予測しています。これは、据置型が商業および工業環境で一般的に導入され、固定場所にしっかりと固定されるためです。これらのコンパクターは一般的に、1立方ヤード当たり最大150ポンドの割合で廃棄物を圧縮できる可搬型のコンパクターよりも大きく、価格も高くなる傾向があるため、毎日大量の廃棄物を排出する企業により適した選択肢となります。
• 用途別では、各用途の現状評価、主な用途価値の重要性のハイライト、市場シェアの測定、経済成長の評価、新興経済諸国における都市化の進展などに重点が置かれているため、予測期間中も商業用が最大セグメントであり続けると思われます。
• 地域別では、特に中国やインドのような新興国における急速な都市化と建設努力の急増が、同地域におけるコンパクターを含む消費者向け電化製品の需要増につながったため、予測期間中アジア太平洋が最大地域であり続けると思われます。

ごみ圧縮機市場の戦略的成長機会

ごみ圧縮機市場には、さまざまな用途でさまざまな成長機会があります。これらの機会を特定し活用することで、市場の拡大を促進し、業務効率を高めることができます。

• 都市廃棄物管理：増加する廃棄物量を管理するため、成長する都市部でごみ圧縮機の使用が拡大します。この機会は都市化の動向と一致し、効率的な廃棄物管理ソリューションの必要性に対応します。
• スマートコンパクションソリューション：リアルタイムのモニタリングと管理のためのIoTを搭載したスマートコンパクターに対する需要の拡大。業務効率の改善とデータ主導の意思決定に重点が置かれます。
• エネルギー効率の高い技術：持続可能性の目標を達成するためにエネルギー効率を高めたコンパクタの開発と提供。この機会は、環境コンプライアンスをサポートし、運用コストを削減します。
• リサイクルと廃棄物分別：廃棄物の分別とリサイクルを促進するコンパクターの設計。この機会は、世界の持続可能性イニシアティブと規制要件に合致します。
• 自動廃棄物処理システム：廃棄物の選別と処理のための自動化されたロボットシステムの導入。この機会は、廃棄物管理業務の効率性と正確性を高めます。

これらの戦略的成長機会は、市場拡大と技術的進歩のための領域を強調するものです。これらは、より効率的で持続可能な、技術的に高度な廃棄物管理ソリューションへの業界のシフトを反映しています。

ごみ圧縮機市場の促進要因・課題

ごみ圧縮機市場は、技術進歩、経済要因、規制要件など、さまざまな市場促進要因・課題の影響を受けます。これらの要因を理解することは、市場情勢を読み解く上で極めて重要です。

ごみ圧縮機市場の促進要因には以下のようなものがあります：

• 技術進歩：圧縮技術とスマートシステムにおける革新は、効率性と有効性を高めます。この要因は、廃棄物管理と運営パフォーマンスの向上をサポートします。
• 規制の遵守：廃棄物管理と環境への影響に関する規制の増加は、高度な圧縮ソリューションの採用を促進します。こうした規制の遵守は市場成長にとって極めて重要です。
• 都市化：都市部の増加により、ごみ圧縮機を含む効率的な廃棄物管理ソリューションへの需要が高まっています。この要因は、拡張可能で効果的な廃棄物処理技術の必要性を反映しています。
• 持続可能性の目標：持続可能性とリサイクルの重視は、環境に優しいごみ圧縮機の開発を促進します。この促進要因は、世界の環境イニシアチブと市場の期待に合致しています。
• コスト効率：運転コストを削減し、廃棄物処理効率を向上させる必要があるため、高度な圧縮技術の採用が促進されます。この促進要因は、経済的および運営上の利益をサポートします。

ごみ圧縮機市場の課題は以下の通り：

• 初期コストの高さ：市場によっては、高度なごみ圧縮機への先行投資が障壁となる場合があります。特に開発途上地域では、高額なコストが採用を制限する可能性があります。

メンテナンスと修理費用：継続的なメンテナンスと修理の必要性は、運用効率と費用対効果に影響を与える可能性があります。この課題には、効果的なサポートとサービス戦略が必要です。

• 規制の複雑さ：地域によって異なる規制要件を乗り越えることは困難です。多様な規制を遵守することは、市場の運営と拡大に複雑さをもたらします。

本レポートでは、以下の11の主要な質問に回答している：

• Q.1.製品タイプ別（自給型、据置型、屋内型ステンレス鋼製、シュート投入式）、廃棄物タイプ別（乾式廃棄物、湿式廃棄物）、用途別（住宅用、農業用、自治体用、商業用、工業用）、地域別（北米、欧州、アジア太平洋地域、世界のその他の地域）で、ごみ圧縮機市場で最も有望な高成長機会は何か。
• Q.2.どのセグメントがより速いペースで成長すると思われますか。
• Q.3.今後成長が加速すると思われる地域とその理由は？
• Q.4.市場力学に影響を与える主な要因は何か？市場における主な課題とビジネスリスクは？
• Q.5.この市場におけるビジネスリスクと競合の脅威は？
• Q.6.この市場における新たな動向とその理由は？
• Q.7.市場における顧客の需要の変化にはどのようなものがありますか？
• Q.8.市場の新たな開発にはどのようなものがありますか？これらの開発を主導している企業はどこですか？
• Q.9.市場の主要企業は？主要企業は事業成長のためにどのような戦略的取り組みを進めていますか？
• Q.10.この市場における競合製品にはどのようなものがあり、材料や製品の代替による市場シェア低下の脅威はどの程度ありますか？
• Q.11.過去5年間にどのようなM&Aが行われ、業界にどのような影響を与えましたか？

目次

第1章 エグゼクティブサマリー

第2章 世界のごみ圧縮機市場：市場力学

• イントロダクション、背景、分類
• サプライチェーン
• 業界の促進要因と課題

第3章 市場動向と予測分析 (2019年～2031年)

• マクロ経済動向 (2019～2024年) と予測 (2025～2031年)
• 世界のごみ圧縮機市場の動向 (2019～2024年) と予測 (2025～2031年)
• 世界のごみ圧縮機市場：製品種類別
  • 自給型
  • 据置型
  • 屋内用ステンレス鋼製
  • シュート投入型
• 世界のごみ圧縮機市場：廃棄物の種類別
  • 乾式廃棄物
  • 湿式廃棄物
• 世界のごみ圧縮機市場：用途別
  • 住宅用
  • 農業用
  • 自治体用
  • 商用用
  • 工業用

第4章 地域別の市場動向と予測分析 (2019年～2031年)

• 世界のごみ圧縮機市場：地域別
• 北米のごみ圧縮機市場
• 欧州のごみ圧縮機市場
• アジア太平洋のごみ圧縮機市場
• その他地域のごみ圧縮機市場

第5章 競合分析

• 製品ポートフォリオ分析
• 運用統合
• ポーターのファイブフォース分析

第6章 成長機会と戦略分析

• 成長機会分析
  • 世界のごみ圧縮機市場の成長機会：製品種類別
  • 世界のごみ圧縮機市場の成長機会：廃棄物の種類別
  • 世界のごみ圧縮機市場の成長機会：用途別
  • 世界のごみ圧縮機市場の成長機会：地域別
• 世界のごみ圧縮機市場の新たな動向
• 戦略的分析
  • 新製品の開発
  • 世界のごみ圧縮機市場の生産能力拡大
  • 世界のごみ圧縮機市場における企業合併・買収 (M&A)、合弁事業
  • 認証とライセンシング

第7章 主要企業のプロファイル

• GE Appliances
• Broan
• Bigbelly
• CAT
• MK Tech Industries
• Precision Machinery Systems
• Genesis Waste Handling Private
• Electrolux Icon
• Whirlpool

The future of the global refuse compactor market looks promising with opportunities in the residential, agricultural, municipal, commercial, and industrial markets. The global refuse compactor market is expected to reach an estimated $0.5 billion by 2031 with a CAGR of 3.5% from 2025 to 2031. The major drivers for this market are increasing awareness and apprehension about environmental pollution levels, expansion of smart city initiatives in both developed and emerging nations, and municipalities' efforts to minimize waste generation and address the shortage of landfill capacity.

• Lucintel forecasts that, within the product type category, the stationary will remain the largest segment over the forecast period because it is commonly deployed in commercial and industrial environments, securely anchored to a fixed location, these compactors are generally larger than their portable counterparts capable of compressing waste at rates of up to 150 pounds per cubic yard, as well as tend to come with a higher price tag, making them more suitable choice for businesses that produce substantial daily waste volumes.
• Within the application category, commercial use will remain the largest segment over the forecast period because it concentrates on assessing the current status of each application, highlighting the significance of key application values, measuring market share, and evaluating economic growth, as well as rising urbanization in developed economies.
• In terms of region, APAC will remain the largest region over the forecast period due to swift urbanization and surge in construction endeavors particularly in emerging nations like China and India that led to increasing demand for consumer appliances, including compactors in this region.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Refuse Compactor Market

The refuse compactor market is undergoing significant changes driven by emerging trends that are shaping its future. These trends include technological advancements, sustainability initiatives, and evolving market demands.

• Smart Technology Integration: Increasing use of IoT and sensors in refuse compactors for real-time data monitoring and management. This trend enhances operational efficiency and enables predictive maintenance, reducing downtime and operational costs.
• Energy Efficiency Improvements: Development of more energy-efficient compaction systems that reduce power consumption and operational costs. This trend supports environmental sustainability by minimizing the carbon footprint of waste management operations.
• Automation and Robotics: Adoption of automated and robotic systems for waste sorting and compaction. These technologies increase efficiency and accuracy, handling diverse waste types and improving overall processing performance.
• Sustainability and Recycling Focus: Enhanced focus on designing compactors that support recycling and waste segregation. This trend aligns with global sustainability goals and regulatory requirements, promoting better waste management practices.
• Urbanization and Increased Demand: Growing urbanization is driving demand for more efficient and scalable refuse compactors. This trend reflects the need for advanced waste management solutions to cope with rising waste volumes in expanding cities.

These trends are reshaping the refuse compactor market by driving technological innovation, improving efficiency, and aligning with sustainability goals. As a result, the market is moving towards more advanced, eco-friendly solutions that meet evolving urban waste management needs.

Recent Developments in the Refuse Compactor Market

Recent developments in the refuse compactor market reflect advancements in technology, efficiency, and regulatory compliance. These key developments are shaping the industry's direction and impacting its future growth.

• Advanced Compaction Technology: Introduction of more efficient compaction systems that enhance waste density and reduce transportation costs. These technologies improve the overall effectiveness of waste management operations.
• Smart Refuse Compactors: Deployment of smart compactors equipped with IoT and sensors for real-time monitoring and management. This development helps in optimizing collection schedules and improving operational efficiency.
• Energy-Efficient Designs: Development of compactors with improved energy efficiency to reduce power consumption and lower operational costs. This trend supports environmental sustainability and aligns with regulatory standards.
• Automated Waste Handling: Integration of automation and robotics for sorting and processing waste. These systems enhance the speed and accuracy of waste handling, addressing diverse waste types more effectively.
• Enhanced Durability and Reliability: Advances in materials and engineering have led to more durable and reliable refuse compactors. This development addresses the need for robust equipment capable of handling various waste conditions.

These developments are significantly impacting the refuse compactor market by improving efficiency, sustainability, and operational effectiveness. They reflect a shift towards more advanced and environmentally friendly waste management solutions.

Strategic Growth Opportunities for the Refuse Compactor Market

The refuse compactor market presents various growth opportunities across different applications. Identifying and leveraging these opportunities can drive market expansion and enhance operational efficiency.

• Urban Waste Management: Expanding refuse compactor use in growing urban areas to manage increasing waste volumes. This opportunity aligns with urbanization trends and addresses the need for efficient waste management solutions.
• Smart Compaction Solutions: Growth in demand for smart compactors equipped with IoT for real-time monitoring and management. This opportunity focuses on improving operational efficiency and data-driven decision-making.
• Energy-Efficient Technologies: Developing and offering compactors with enhanced energy efficiency to meet sustainability goals. This opportunity supports environmental compliance and reduces operational costs.
• Recycling and Waste Segregation: Designing compactors that facilitate better waste segregation and recycling. This opportunity aligns with global sustainability initiatives and regulatory requirements.
• Automated Waste Handling Systems: Implementing automated and robotic systems for waste sorting and processing. This opportunity enhances the efficiency and accuracy of waste management operations.

These strategic growth opportunities highlight areas for market expansion and technological advancement. They reflect the industry's shift towards more efficient, sustainable, and technologically advanced waste management solutions.

Refuse Compactor Market Driver and Challenges

The refuse compactor market is influenced by various drivers and challenges, including technological advancements, economic factors, and regulatory requirements. Understanding these factors is crucial for navigating the market landscape.

The factors responsible for driving the refuse compactor market include:

• Technological Advancements: Innovations in compaction technology and smart systems enhance efficiency and effectiveness. This driver supports improved waste management and operational performance.
• Regulatory Compliance: Increasing regulations on waste management and environmental impact drive the adoption of advanced compaction solutions. Compliance with these regulations is crucial for market growth.
• Urbanization: Growing urban areas increase demand for efficient waste management solutions, including refuse compactors. This driver reflects the need for scalable and effective waste-handling technologies.
• Sustainability Goals: Emphasis on sustainability and recycling drives the development of eco-friendly refuse compactors. This driver aligns with global environmental initiatives and market expectations.
• Cost Efficiency: The need to reduce operational costs and improve waste processing efficiency promotes the adoption of advanced compaction technologies. This driver supports economic and operational benefits.

Challenges in the refuse compactor market are:

• High Initial Costs: The upfront investment in advanced refuse compactors can be a barrier for some markets. High costs may limit adoption, particularly in developing regions.

Maintenance and Repair Costs: Ongoing maintenance and repair requirements can impact operational efficiency and cost-effectiveness. This challenge necessitates effective support and service strategies.

• Regulatory Complexity: Navigating varying regulatory requirements across regions can be challenging. Compliance with diverse regulations adds complexity to market operations and expansion.

List of Refuse Compactor Companies

Companies in the market compete based on product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies refuse compactor companies cater to increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the refuse compactor companies profiled in this report include-

• GE Appliances
• Broan
• Bigbelly
• CAT
• MK Tech Industries
• Precision Machinery Systems
• Genesis Waste Handling Private
• Electrolux Icon
• Whirlpool

Refuse Compactor by Segment

The study includes a forecast for the global refuse compactor market by product type, waste type, application, and region.

Refuse Compactor Market by Product Type [Analysis by Value from 2019 to 2031]:

• Self-Contained
• Stationary
• Indoor Stainless Steel
• Chute Fed Compactors

Refuse Compactor Market by Waste Type [Analysis by Value from 2019 to 2031]:

• Dry Waste
• Wet Waste

Refuse Compactor Market by Application [Analysis by Value from 2019 to 2031]:

• Residential Use
• Agricultural Use
• Municipal Use
• Commercial Use
• Industrial Use

Refuse Compactor Market by Region [Analysis by Value from 2019 to 2031]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Refuse Compactor Market

Major players in the market are expanding their operations and forming strategic partnerships to strengthen their positions. The below image highlights recent developments by major refuse compactor producers in key regions: the USA, China, India, Japan, and Germany.

• United States: In the U.S., refuse compactors increasingly incorporate advanced technologies like IoT for remote monitoring and smart operation. There is a focus on enhancing energy efficiency and compliance with stricter environmental regulations, improving overall waste management effectiveness.
• China: China has rapidly adopted refuse compactors due to urban expansion and heightened environmental concerns. Recent advancements include improved compaction mechanisms and the integration of smart technologies to optimize waste collection and processing, reflecting the country's push toward sustainable waste management.
• Germany: Germany's refuse compactor market is advancing with innovations in waste segregation and automated compaction systems. Emphasis on recycling and sustainability drives the development of more efficient, eco-friendly compactors that align with Germany's stringent waste management policies.
• India: In India, the focus has been on expanding refuse compactor usage in urban areas to handle increasing waste volumes. Developments include cost-effective compaction solutions and enhanced durability to cope with diverse waste types, addressing the country's growing waste management challenges.
• Japan: Japan is leveraging its technological expertise to enhance refuse compactors with advanced features such as automated sorting and real-time monitoring. These innovations are aimed at improving waste processing efficiency and supporting Japan's commitment to high recycling rates and waste minimization.

Features of the Global Refuse Compactor Market

Market Size Estimates: Refuse compactor market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.

Segmentation Analysis: Refuse compactor market size by product type, waste type, application, and region in terms of value ($B).

Regional Analysis: Refuse compactor market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different product types, waste types, applications, and regions for the refuse compactor market.

Strategic Analysis: This includes M&A, new product development, and the competitive landscape of the refuse compactor market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M&A, and more.

This report answers the following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the refuse compactor market by product type (self-contained, stationary, indoor stainless steel, and chute fed compactors), waste type (dry waste and wet waste), application (residential use, agricultural use, municipal use, commercial use, and industrial use), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Refuse Compactor Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2019 to 2031

• 3.1. Macroeconomic Trends (2019-2024) and Forecast (2025-2031)
• 3.2. Global Refuse Compactor Market Trends (2019-2024) and Forecast (2025-2031)
• 3.3: Global Refuse Compactor Market by Product Type
  • 3.3.1: Self-Contained
  • 3.3.2: Stationary
  • 3.3.3: Indoor Stainless Steel
  • 3.3.4: Chute Fed Compactors
• 3.4: Global Refuse Compactor Market by Waste Type
  • 3.4.1: Dry Waste
  • 3.4.2: Wet Waste
• 3.5: Global Refuse Compactor Market by Application
  • 3.5.1: Residential Use
  • 3.5.2: Agricultural Use
  • 3.5.3: Municipal Use
  • 3.5.4: Commercial Use
  • 3.5.5: Industrial Use

4. Market Trends and Forecast Analysis by Region from 2019 to 2031

• 4.1: Global Refuse Compactor Market by Region
• 4.2: North American Refuse Compactor Market
  • 4.2.1: North American Refuse Compactor Market by Product Type: Self-Contained, Stationary, Indoor Stainless Steel, and Chute Fed Compactors
  • 4.2.2: North American Refuse Compactor Market by Application: Residential Use, Agricultural Use, Municipal Use, Commercial Use, and Industrial Use
• 4.3: European Refuse Compactor Market
  • 4.3.1: European Refuse Compactor Market by Product Type: Self-Contained, Stationary, Indoor Stainless Steel, and Chute Fed Compactors
  • 4.3.2: European Refuse Compactor Market by Application: Residential Use, Agricultural Use, Municipal Use, Commercial Use, and Industrial Use
• 4.4: APAC Refuse Compactor Market
  • 4.4.1: APAC Refuse Compactor Market by Product Type: Self-Contained, Stationary, Indoor Stainless Steel, and Chute Fed Compactors
  • 4.4.2: APAC Refuse Compactor Market by Application: Residential Use, Agricultural Use, Municipal Use, Commercial Use, and Industrial Use
• 4.5: ROW Refuse Compactor Market
  • 4.5.1: ROW Refuse Compactor Market by Product Type: Self-Contained, Stationary, Indoor Stainless Steel, and Chute Fed Compactors
  • 4.5.2: ROW Refuse Compactor Market by Application: Residential Use, Agricultural Use, Municipal Use, Commercial Use, and Industrial Use

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Refuse Compactor Market by Product Type
  • 6.1.2: Growth Opportunities for the Global Refuse Compactor Market by Waste Type
  • 6.1.3: Growth Opportunities for the Global Refuse Compactor Market by Application
  • 6.1.4: Growth Opportunities for the Global Refuse Compactor Market by Region
• 6.2: Emerging Trends in the Global Refuse Compactor Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Refuse Compactor Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Refuse Compactor Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: GE Appliances
• 7.2: Broan
• 7.3: Bigbelly
• 7.4: CAT
• 7.5: MK Tech Industries
• 7.6: Precision Machinery Systems
• 7.7: Genesis Waste Handling Private
• 7.8: Electrolux Icon
• 7.9: Whirlpool