自動車用燃料噴射装置市場レポート：2030年までの動向、予測、競合分析

自動車用燃料噴射装置の動向と予測

自動車用燃料噴射装置の世界市場の将来は、乗用車市場と商用車市場に機会があり、有望視されています。自動車用燃料噴射装置の世界市場は、2024年から2030年までのCAGRが5.8%で、2030年までに推定154億米ドルに達すると予想されています。この市場の主な促進要因は、低燃費車への需要の増加、直噴エンジンの採用拡大、ターボチャージャー付きエンジンや過給エンジンの需要の高まりです。

• Lucintelの予測では、搭載カテゴリーでは、マルチポート＆ダイレクトインジェクターが、優れた信頼性、蒸気排出量の低減、ホット再始動時の素早いプライムなどの利点により、予測期間中に最も高い成長を遂げる見込みです。
• 車種別では、乗用車が引き続き最大セグメントです。
• 地域別では、より燃費の良い車への需要の高まり、購買力の向上、同地域での自動車部品の生産増加により、APACが予測期間中に最も高い成長を遂げると予想されます。

自動車用燃料噴射装置市場の戦略的成長機会

一方、自動車用燃料噴射装置市場の用途別クラスタリングは、技術の進歩、消費者の嗜好の変化、規制要件に後押しされ、様々な戦略的成長の可能性を提供します。

• ハイブリッド車と電気自動車の普及：ハイブリッド車と電気自動車分野の成長は、特殊な燃料噴射装置を開発する機会を提供します。これらの用途では、インジェクターが最大限の性能と効率を発揮できるよう、新しい設計が必要とされます。
• 高性能エンジンへの需要の高まり：高性能車は、より高い効率と優れたエンジン性能を保証する高度な燃料噴射装置の新たな機会を生み出します。この分野では、より高い圧力と温度に対応できる高精度のインジェクターが必要とされています。
• 排出ガス低減技術：新しく改良された排ガス規制技術に使用する燃料インジェクタを開発する必要性が高まっています。世界の環境保護指令に沿って、有害な排出ガスを削減しながら燃焼効率を向上させるインジェクタの開発には、より大きな機会が存在します。
• 内燃機関の燃費向上：燃費とそれに関連する進歩への注目が高まる中、燃焼効率と効果的な燃料供給を促進するインジェクターには大きな機会があります。インジェクター技術の革新は、燃費の向上と運転コストの削減に貢献する可能性があります。
• 新興市場における成長：世界の主要な自動車市場が比較的横ばいの成長を遂げる一方で、新興市場は、自動車生産台数の増加と低燃費技術に対する需要の高まりにより、大きな成長機会となります。これらの市場をターゲットとする燃料噴射装置は、成長する自動車産業を活用することができます。

上記の要因は、自動車用燃料噴射装置市場における技術革新と新分野・新地域への拡大の重要なマーケットカタリストとなっています。

自動車用燃料噴射装置市場の促進要因・課題

自動車用燃料噴射装置市場は、その成長と開拓に影響を与える様々な促進要因・課題を包含しています。これらの要因を認識することは、市場に参入し戦略的目標に取り組む上で極めて重要です。

自動車用燃料噴射装置市場を牽引する要因は以下の通りです：

• 技術の進歩：技術の進歩：直噴や高圧システムなどの燃料噴射装置技術の進歩は、エンジン性能と燃費を向上させることで市場の成長を促進します。これらの進歩は、厳しい排ガス規制への準拠を容易にし、車両全体の性能向上を確実にします。
• 規制の圧力：世界的に排ガス規制がますます厳しくなっているため、自動車メーカーは燃料噴射装置技術の進歩を採用するよう求められています。こうした規制により、自動車メーカーは汚染物質を削減し、環境基準を満たすインジェクターの開発を求められています。
• 燃料効率に対する需要の増加：燃料価格の上昇と低燃費車に対する消費者の需要の高まりは、燃料噴射装置の先端技術に圧力をかけています。これらの技術は燃費を向上させ、経済と環境の両方の懸念に対処するのに役立ちます。
• ハイブリッド車と電気自動車の成長：ハイブリッド車と電気自動車市場の拡大は、燃料噴射装置に対する特定のニーズを生み出します。このため、これらの用途に合わせた技術革新も促進され、先進技術を搭載した自動車の性能と効率のさらなる向上が促進されます。

自動車用燃料噴射装置市場の課題は以下の通り：

• 高い開発コスト：高度な燃料噴射装置の技術開発には多額の費用がかかります。高い研究開発費と新技術への投資は収益性に影響する可能性があり、メーカー、特に中小企業や新興企業にとって課題となります。
• 排出基準の複雑さ：地域によって異なる複雑な排ガス規制をうまく乗り切ることは課題です。燃料噴射装置メーカーは、多様な規制要件に対応するために絶えず革新と適応を続けなければならず、製品開発とコンプライアンスへの取り組みを複雑にしています。
• サプライチェーンの混乱：原材料の不足や物流の問題など、サプライチェーンの混乱は、燃料噴射装置の生産と流通に影響を与える可能性があります。こうした混乱は、遅延やコスト増につながり、市場の安定性と供給力に影響を与える可能性があります。

自動車用燃料噴射装置市場は、技術革新、規制要件、経済的要因の影響を大きく受ける。技術の進歩と規制の圧力が成長と需要の原動力となる一方で、高い開発コスト、複雑な排出基準、サプライチェーンの混乱といった課題がメーカーにハードルを突きつけています。市場参入企業が業界の新たな機会をうまく利用するためには、こうした市場促進要因・課題のバランスを取ることが極めて重要です。

目次

第1章 エグゼクティブサマリー

第2章 世界の自動車用燃料噴射装置市場：市場力学

• イントロダクション、背景、分類
• サプライチェーン
• 業界の促進要因と課題

第3章 2018年から2030年までの市場動向と予測分析

• マクロ経済動向（2018～2023年）と予測（2024～2030年）
• 世界の自動車用燃料インジェクター市場の動向（2018～2023年）と予測（2024～2030年）
• 世界の自動車用燃料噴射装置市場、マウント別
  • セントラルポートインジェクター
  • スロットルボディインジェクター
  • マルチポート＆ダイレクト燃料インジェクター
• 世界の自動車用燃料噴射装置市場、燃料噴射方式別
  • ディーゼル燃料インジェクター
  • ガソリン燃料インジェクター
• 自動車燃料噴射装置の世界市場、圧力範囲別
  • 高圧インジェクター
  • 低圧インジェクター
• 自動車燃料噴射装置の世界市場、車種別
  • 乗用車
  • 商用車

第4章 2018年から2030年までの地域別市場動向と予測分析

• 地域別の自動車燃料噴射装置の世界市場
• 北米の自動車燃料噴射装置市場
• 欧州の自動車燃料噴射装置市場
• アジア太平洋の自動車燃料噴射装置市場
• その他地域の自動車用燃料噴射装置市場

第5章 競合分析

• 製品ポートフォリオ分析
• 運用統合
• ポーターのファイブフォース分析

第6章 成長機会と戦略分析

• 成長機会分析
  • 世界の自動車用燃料噴射装置市場の成長機会
  • 燃料噴射装置別の世界の自動車用燃料噴射装置市場の成長機会
  • 圧力範囲別の世界の自動車用燃料噴射装置市場の成長機会
  • 世界の自動車用燃料噴射装置市場における車種別の成長機会
  • 地域別の世界の自動車燃料噴射装置市場の成長機会
• 世界の自動車用燃料噴射装置市場の新たな動向
• 戦略分析
  • 新製品開発
  • 世界の自動車用燃料噴射装置市場の生産能力拡大
  • 世界の自動車燃料インジェクター市場における合併、買収、合弁事業
  • 認証とライセンシング

第7章 主要企業の企業プロファイル

• Continental
• Infineon Technologies
• Robert Bosch
• Hitachi
• Delphi Automotive
• Woodward
• Keihin

Automotive Fuel Injector Trends and Forecast

The future of the global automotive fuel injector market looks promising with opportunities in the passenger vehicle and commercial vehicle markets. The global automotive fuel injector market is expected to reach an estimated $15.4 billion by 2030 with a CAGR of 5.8% from 2024 to 2030. The major drivers for this market are the increasing demand for fuel-efficient vehicles, the growing adoption of direct injection engines, and the rising demand for turbocharged and supercharged engines

• Lucintel forecasts that, within the mounting category, multiport & direct fuel injectors are expected to witness the highest growth over the forecast period due to their advantages like good reliability, lower emissions of vapor, and faster prime in hot restarts.
• Within the vehicle type category, passenger vehicles will remain the largest segment.
• In terms of regions, APAC is expected to witness the highest growth over the forecast period due to growing demand for more fuel-efficient cars, higher purchasing power, and growing production of automotive components in the region.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Automotive Fuel Injector Market

The innovation in the automotive fuel injector market has been driven by technological advancements and changing consumer preferences, which have shaped the landscape. These trends have led to innovations that increase performance and efficiency levels.

• Hybrid and Electric Vehicle Integration: The application of fuel injectors in hybrid and electric vehicles increasingly demands optimization for performance and fuel economy. The growth of electric and hybrid vehicles has driven this trend, as they are being made compatible with diverse powertrains.
• High-Pressure Injectors Development: With the increased demand for improved fuel atomization and combustion efficiencies, high-pressure fuel injectors have gained market share. This is in response to the desire for high engine performance and strict emission regulations, which improve fuel economy and reduce emissions.
• DFI Improvements: The performance characteristics of direct fuel injection systems are evolving toward better fuel efficiency. The use of DFI technology allows for a closer-to-ideal air-fuel mixture, improving combustion and lowering emissions while meeting both regulatory standards and consumer demands for improved fuel economy.
• Investment in Fuel Injectors Focused on Emission Reduction Technologies: There is an increased investment in fuel injectors that support emission reduction technologies. Innovations in injector design help vehicles meet stringent emission standards, enabling cleaner air and compliance with global environmental regulations.
• Smart Fuel Systems: The number of smart systems integrating technologies into injectors, including sensors and adaptive controls, is increasing. These systems enable real-time, on-the-fly adjustments in fuel delivery, enhancing engine efficiency while reducing fuel consumption.

The above trends are instrumental in driving the automotive fuel injector market toward greater efficiency, performance, and adherence to environmental standards.

Recent Developments in the Automotive Fuel Injector Market

Recent developments in the automotive fuel injector market reflect advancements in technology, performance, and environmental sustainability. Major developments driving the dynamics of the market trends for fuel injectors include:

• New Innovations in Injectors: Innovations in injectors include advanced fuel injectors with better precision and durability. These technologies focus on improving fuel atomization for optimized combustion, thus ensuring better overall engine performance while meeting the demand for efficiency and reduced emissions.
• Increased Adoption of Direct Injection Systems: With their efficiency and performance benefits, direct injection systems are becoming the norm in most cars. These systems deliver fuel directly into the combustion chamber, improving fuel economy and reducing emissions to meet both consumer demands and stricter environmental regulations.
• Higher-Pressure Injection Technology Developments: High-pressure fuel injection systems have been developed in response to the increasing demand for high-performance engines. The benefits of these developments include increased fuel atomization and combustion efficiency, helping to meet performance and emission requirements for vehicles.
• Hybrid and Electric Vehicle Application Growth: Increased penetration into hybrid and electric vehicle markets continues to drive the development of fuel injectors for these applications. Innovations include design enhancements for improved performance in these specific applications and integration with advanced powertrains, offering cleaner and more efficient vehicle options.
• Advanced Emission Control Features: New designs in fuel injectors incorporate advanced emission control features to meet stringent regulatory standards. These developments help reduce pollutants, improve vehicle emissions performance, and contribute to environmental sustainability by ensuring compliance with global regulations.

These developments have a significant impact on the growth of the automotive fuel injector market by driving technological advancements and meeting changing industry standards.

Strategic Growth Opportunities for Automotive Fuel Injector Market

Meanwhile, the applicational clustering of the automotive fuel injector market provides various strategic growth possibilities, driven by technological advancement, changing consumer preferences, and regulatory requirements.

• Hybrid and Electric Vehicle Penetration: The growth of the hybrid and electric vehicle segment presents an opportunity to develop specialized fuel injectors. These applications require new designs to ensure the injector provides maximum performance and efficiency.
• Growing Demand for High-Performance Engines: High-performance cars create new opportunities for advanced fuel injectors that ensure higher efficiency and better engine performance. This sector requires high-precision injectors capable of supporting higher pressures and temperatures.
• Emission Reduction Technologies: There is an increasing need to develop fuel injectors for use in new and improved emission control technologies. Greater opportunities exist in developing injectors that improve combustion efficiency while reducing harmful emissions, in line with global environmental protection directives.
• Fuel Economy in Internal Combustion Engines: With the growing focus on fuel economy and related advancements, injectors that promote combustion efficiency and effective fuel delivery present significant opportunities. Innovations in injector technology could contribute to better fuel economy and reduced operating costs.
• Growth in Emerging Markets: While major automotive markets around the world experience relatively flat growth, emerging markets represent significant opportunities due to increased vehicle production and demand for fuel-efficient technologies. Fuel injectors targeting these markets can capitalize on the growing automobile industry.

The factors above have become significant catalysts for innovation and expansion into newer segments and geographies within the automotive fuel injector market.

Automotive Fuel Injector Market Driver and Challenges

The automotive fuel injector market encompasses various drivers and challenges that affect its growth and development. Recognizing these factors is crucial for breaking into the market and addressing strategic objectives.

The factors responsible for driving the automotive fuel injector market include:

• Technology Advancements: Advancements in fuel injector technology, such as direct injection and high-pressure systems, fuel market growth by improving engine performance and fuel efficiency. These advancements facilitate compliance with strict emissions regulations and ensure improvements in overall vehicle performance.
• Regulatory Pressures: Increasingly stringent emission regulations worldwide have prompted automakers to adopt advances in fuel injector technologies. These regulations require car manufacturers to develop injectors that reduce pollutants and meet environmental standards.
• Increasing Demand for Fuel Efficiency: Rising fuel prices and the growing consumer demand for fuel-efficient cars put pressure on the advanced technology of fuel injectors. These technologies help improve fuel economy, addressing both economic and environmental concerns.
• Growth of Hybrid and Electric Vehicles: The expansion of hybrid and electric vehicle markets creates specific needs for fuel injectors. This also drives innovations tailored to these applications, facilitating further improvements in the performance and efficiency of vehicles with advanced technologies.

Challenges in the automotive fuel injector market include:

• High Development Costs: The cost of developing advanced fuel injector technologies can be substantial. High research and development (R&D) expenses and investments in new technologies can impact profitability, posing a challenge for manufacturers, particularly smaller or emerging companies.
• Complexity of Emission Standards: Navigating the complex and varying emission standards across different regions can be challenging. Fuel injector manufacturers must continuously innovate and adapt to meet diverse regulatory requirements, complicating product development and compliance efforts.
• Supply Chain Disruptions: Disruptions in the supply chain, such as shortages of raw materials or logistical issues, can affect the production and distribution of fuel injectors. These disruptions can lead to delays and increased costs, impacting market stability and availability.

The automotive fuel injector market is significantly influenced by technological innovations, regulatory requirements, and economic factors. While advancements in technology and regulatory pressures drive growth and demand, challenges such as high development costs, complex emission standards, and supply chain disruptions pose hurdles for manufacturers. Balancing these drivers and challenges is crucial for market participants to successfully navigate and capitalize on emerging opportunities in the industry.

List of Automotive Fuel Injector Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies automotive fuel injector companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the automotive fuel injector companies profiled in this report include-

• Continental
• Infineon Technologies
• Robert Bosch
• Hitachi
• Delphi Automotive
• Woodward
• Keihin

Automotive Fuel Injector by Segment

The study includes a forecast for the global automotive fuel injector by mounting, fuel injected, pressure range, vehicle type, and region.

Automotive Fuel Injector Market by Mounting [Analysis by Value from 2018 to 2030]:

• Central Port Injector
• Throttle Body Injector
• Multiport & Direct Fuel Injector

Automotive Fuel Injector Market by Fuel Injected [Analysis by Value from 2018 to 2030]:

• Diesel Fuel Injectors
• Gasoline Fuel Injectors

Automotive Fuel Injector Market by Pressure Range [Analysis by Value from 2018 to 2030]:

• High Pressure Injectors
• Low Pressure Injectors

Automotive Fuel Injector Market by Vehicle Type [Analysis by Value from 2018 to 2030]:

• Passenger Vehicles
• Commercial Vehicles

Automotive Fuel Injector Market by Region [Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Automotive Fuel Injector Market

The automotive fuel injector market has been witnessing remarkable developments in recent times due to technological innovations, regulatory pressures, and shifting consumer demands. The key developments across major markets are shaping the future of the industry, with a focus on efficiency, emission reduction, and performance improvement. A quick rundown of the recent trends in the United States, China, Germany, India, and Japan:

• US: The US is focusing on advanced fuel injectors capable of improving fuel economy and reducing emission rates. The increasing adoption of DFI systems is occurring, and the trend is pushing towards integrating injectors with hybrid and electric vehicle platforms to meet strict environmental regulations.
• China: The automotive fuel injector market in China is growing rapidly due to strong demand for fuel-efficient vehicles and government incentives for cleaner technologies. Among the turbocharged engines, the latest innovations and advancements in multi-port fuel injection systems are driving the growth of the market.
• Germany: The German market is shaped by innovations in high-pressure fuel injectors and ongoing debates on diesel engine technology. There is significant pressure on injectors to meet the current Euro 6 emission standards, which has contributed to increased engine performance and lower emissions.
• India: The automotive fuel injector market in India is moving in the right direction towards affordability and efficiency. Two major factors driving the growth of the automotive fuel injector market in India are the increase in vehicle production and the adoption of fuel-efficient technologies, while the growing interest in advanced fuel injectors is meeting the needs of emerging markets.
• Japan: High-performance and hybrid vehicles continue to lead the way for technological growth in fuel injection systems in Japan. Attention has been focused on the integration of advanced engine management systems with injectors to improve fuel economy and reduce environmental impact.

Features of the Global Automotive Fuel Injector Market

Market Size Estimates: Automotive fuel injector market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: Automotive fuel injector market size by various segments, such as by mounting, fuel injected, pressure range, vehicle type, and region in terms of value ($B).

Regional Analysis: Automotive fuel injector market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different mountings, fuel injected, pressure ranges, vehicle types, and regions for the automotive fuel injector market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the automotive fuel injector market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the automotive fuel injector market by mounting (central port injector, throttle body injector, and multiport & direct fuel injector), fuel injected (diesel fuel injectors and gasoline fuel injectors), pressure range (high pressure injectors and low pressure injectors), vehicle type (passenger vehicles and commercial vehicles), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Automotive Fuel Injector Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2018 to 2030

• 3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
• 3.2. Global Automotive Fuel Injector Market Trends (2018-2023) and Forecast (2024-2030)
• 3.3: Global Automotive Fuel Injector Market by Mounting
  • 3.3.1: Central Port Injector
  • 3.3.2: Throttle Body Injector
  • 3.3.3: Multiport & Direct Fuel Injector
• 3.4: Global Automotive Fuel Injector Market by Fuel Injected
  • 3.4.1: Diesel Fuel Injectors
  • 3.4.2: Gasoline Fuel Injectors
• 3.5: Global Automotive Fuel Injector Market by Pressure Range
  • 3.5.1: High Pressure Injectors
  • 3.5.2: Low Pressure Injectors
• 3.6: Global Automotive Fuel Injector Market by Vehicle Type
  • 3.6.1: Passenger Vehicles
  • 3.6.2: Commercial Vehicles

4. Market Trends and Forecast Analysis by Region from 2018 to 2030

• 4.1: Global Automotive Fuel Injector Market by Region
• 4.2: North American Automotive Fuel Injector Market
  • 4.2.1: North American Market by Mounting: Central Port Injector, Throttle Body Injector, and Multiport & Direct Fuel Injector
  • 4.2.2: North American Market by Vehicle Type: Passenger Vehicles and Commercial Vehicles
• 4.3: European Automotive Fuel Injector Market
  • 4.3.1: European Market by Mounting: Central Port Injector, Throttle Body Injector, and Multiport & Direct Fuel Injector
  • 4.3.2: European Market by Vehicle Type: Passenger Vehicles and Commercial Vehicles
• 4.4: APAC Automotive Fuel Injector Market
  • 4.4.1: APAC Market by Mounting: Central Port Injector, Throttle Body Injector, and Multiport & Direct Fuel Injector
  • 4.4.2: APAC Market by Vehicle Type: Passenger Vehicles and Commercial Vehicles
• 4.5: ROW Automotive Fuel Injector Market
  • 4.5.1: ROW Market by Mounting: Central Port Injector, Throttle Body Injector, and Multiport & Direct Fuel Injector
  • 4.5.2: ROW Market by Vehicle Type: Passenger Vehicles and Commercial Vehicles

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Automotive Fuel Injector Market by Mounting
  • 6.1.2: Growth Opportunities for the Global Automotive Fuel Injector Market by Fuel Injected
  • 6.1.3: Growth Opportunities for the Global Automotive Fuel Injector Market by Pressure Range
  • 6.1.4: Growth Opportunities for the Global Automotive Fuel Injector Market by Vehicle Type
  • 6.1.5: Growth Opportunities for the Global Automotive Fuel Injector Market by Region
• 6.2: Emerging Trends in the Global Automotive Fuel Injector Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Automotive Fuel Injector Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Automotive Fuel Injector Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Continental
• 7.2: Infineon Technologies
• 7.3: Robert Bosch
• 7.4: Hitachi
• 7.5: Delphi Automotive
• 7.6: Woodward
• 7.7: Keihin