市場調査レポート
商品コード
1466325
データ・コンバータの世界市場:タイプ別、サンプリング・レート別、解像度別、産業別-2024-2030年予測Data Converter Market by Type (Analog-To-Digital Converters, Digital-To-Analog Converters), Sampling Rate (General-Purpose Data Converters, High-Speed Data Converters), Resolution, Industry - Global Forecast 2024-2030 |
● お客様のご希望に応じて、既存データの加工や未掲載情報(例:国別セグメント)の追加などの対応が可能です。 詳細はお問い合わせください。
データ・コンバータの世界市場:タイプ別、サンプリング・レート別、解像度別、産業別-2024-2030年予測 |
出版日: 2024年04月17日
発行: 360iResearch
ページ情報: 英文 189 Pages
納期: 即日から翌営業日
|
データ・コンバータの世界市場規模は2023年に64億8,000万米ドルと推計され、2024年には69億5,000万米ドルに達すると予測され、CAGR 7.67%で2030年には108億8,000万米ドルに達すると予測されます。
データ・コンバータの世界は、データをある形式から別の形式に変換する電子機器および回路であり、民生用電子機器から産業用機器に至るまで、さまざまな用途で利用されています。データ・コンバータの世界には、シングルチャンネルとマルチチャンネルがあります。シングルチャンネルのデータ・コンバータの世界は、1つのデータストリームを扱い、デジタルからアナログ、またはその逆に変換します。マルチチャンネルのデータ・コンバータの世界は、複数のストリームを同時に処理しますので、様々なセンサーや信号を並行して処理する必要があるシステムに特に有効です。データ・コンバータの世界は集積回路(IC)として提供されており、変換を行うために必要なコンポーネントが1つのチップに収められています。独立型データ・コンバータの世界は、集積回路の外でデータ変換を行うディスクリート部品またはモジュールです。組み込みIP(Intellectual Property)とは、より大きなシステムオンチップ(SoC)やフィールドプログラマブルゲートアレイ(FPGA)内に実装されるコアとして設計され、ライセンスされたデータ変換機能を指します。ワイヤレス通信ネットワークの成長、高解像度画像の使用増加、デジタル技術の普及により、近年の市場開拓は拡大しています。しかし、データ変換プロセスに関連するリスク要因や、熟練した経験豊富な労働力が限られていることが、市場開拓の妨げになる可能性があります。とはいえ、5Gインフラの急速な確立と低消費電力のイントロダクションは、今後数年間の市場開拓に大きな展望をもたらします。
主な市場の統計 | |
---|---|
基準年[2023] | 64億8,000万米ドル |
予測年 [2024] | 69億5,000万米ドル |
予測年 [2030] | 108億8,000万米ドル |
CAGR(%) | 7.67% |
サンプリングレート精度が要求される特殊で高性能な使用事例で高速データ・コンバータの世界の使用が増加
汎用データ・コンバータの世界は、アナログ・デジタル変換(ADC)およびデジタル・アナログ変換(DAC)タスクを実行するために一般的に使用されるデバイスです。これらのデバイスは中程度の精度で、標準的なサンプリング・レートで動作し、アナログ波形をデジタル信号に変換します。一方、高速データ・コンバータの世界は、高サンプリング・レート(通常1 GHz以上)でアナログ/デジタル変換およびデジタル/アナログ変換を実行できる特殊なデバイスです。これらのデバイスは、無線通信、計測器、航空宇宙/防衛エレクトロニクスなどの高速、高帯域幅のアプリケーションを可能にするように設計されています。汎用コンバーターは通常、高速タイプに比べてサンプリング・レートと精度が低いです。汎用コンバーターは、統合が容易でコストが低く、要求の厳しくないアプリケーションに十分な信頼性があることが特徴です。汎用コンバーターと比較して、高速データ・コンバータの世界は高いコストで優れた性能を提供します。より高速なデータ処理をサポートし、タイミングや忠実度が厳しく要求されるアプリケーションに不可欠です。
タイプ通信や自動車産業で高まるアナログ・デジタル・コンバータへの関心
アナログ・デジタル・コンバータ(ADC)は、アナログ信号を電子システムで処理するためのデジタル・データに変換します。世界がデジタル技術に移行するにつれて、高性能ADCの使用は通信、ヘルスケア、自動車を含む業界全体で増加しています。通信分野では、次世代の5G無線インフラや高速データ収集システムのために、毎秒1ギガサンプル以上のサンプル・レートを持つ高分解能ADCが必要とされています。デジタル・アナログ・コンバータ(DAC)は、デジタル信号をアナログ信号に変換します。DACの選択は、必要なアナログ信号出力、電圧、電流、分解能、精度によって決まる。
解像度:データ・コンバータの世界を20ビットにすることで、高精度のアプリケーションに対応できます。
20ビット以上の高分解能データ・コンバータの世界は、わずかな信号の変化も捉える必要がある高精度アプリケーションに最適です。医療機器、航空宇宙システム、ハイエンドオーディオ機器などです。10ビット以下の低解像度のデータ・コンバータの世界は、高精度を必要としない基本的なアプリケーション(一部の工業用、家庭用電子機器、特定の通信機器など)には十分です。最大20ビットのデータ・コンバータの世界は、車載システム、計測器、一部の家電製品などの用途に、性能と費用対効果のバランスがとれた中間の分解能を提供します。
産業界自動車産業におけるデータ変換の高い可能性による安全機能の向上と環境負荷の低減
自動車業界では、自動運転やコネクテッド・ビークルの技術が急速に進歩しています。自動車にはセンサーやシステムが搭載され、車両性能、部品診断、 促進要因の行動、交通パターン、周辺環境に関する膨大なデータが生成されるようになっています。自動車業界におけるデータ変換は、安全機能の改善、業務効率の向上、環境への影響の低減、顧客体験の向上に役立っています。通信会社もまた、ネットワーク計画、最適化、顧客サービスのためにデータ変換に依存しています。人々がより多くのデバイスとより高い帯域幅のサービスを採用するにつれて、通信事業者はネットワークの使用状況、サービス品質、デバイスのパフォーマンス、顧客の活動に関する大量のデータを取得するようになります。データ変換により、通信事業者は反応型から予測型ビジネスモデルへと移行することができます。コンシューマー・エレクトロニクスは、スマート・ホーム・システム、パーソナル・ヘルス・モニタリング、エンターテインメント・デバイスの電源として、データ変換に依存しています。データ変換ソリューションは、音声やビデオから環境センサーや生体認証データまで、幅広い種類のデータを扱う必要があります。産業分野では、重機械、高度なロボット工学、産業用IoT、スマート工場に電力を供給するための堅牢なデータ変換ソリューションが必要です。主なニーズには、極めて大量のデータを低遅延で高速に処理することが含まれます。データ変換は、高度なヘルスケアシステム、医療機器、診断装置、電子カルテを実現するために極めて重要です。高い精度、セキュリティ、機密性の高い医療データを扱う能力が重要なニーズです。
地域別インサイト
アメリカのデータ・コンバータの世界市場は、通信チャネルの著しい成長と市場プレイヤーの強い存在感により、よく発展しています。5Gインフラの普及、IIoTの急速な導入、産業規模でのコネクテッドデバイスにより、同地域のデータ・コンバータの世界市場規模は拡大しています。また、欧州諸国はテクノロジーの台頭によりデジタル経済を強化しており、EMEA地域におけるデータ・コンバータの世界の需要を高めています。さらに、アラブ首長国連邦(UAE)やアフリカ諸国では、5G技術の採用が急増しており、ワイヤレスデバイスの需要が高まり、データ・コンバータの世界の展開が拡大しています。アジア太平洋地域も、半導体生産に有利な規制政策により、予測期間中に大きな成長が見込まれています。高度なデジタル技術やデバイスの採用が進んでいるため、アジア諸国ではデータ・コンバータの世界の活躍の場が広がっています。
FPNVポジショニング・マトリックス
FPNVポジショニングマトリックスはデータ・コンバータの世界市場を評価する上で極めて重要です。事業戦略や製品満足度に関連する主要指標を調査し、ベンダーの包括的な評価を提供します。この綿密な分析により、ユーザーは各自の要件に沿った十分な情報に基づいた意思決定を行うことができます。評価に基づき、ベンダーは成功の度合いが異なる4つの象限に分類されます:フォアフロント(F)、パスファインダー(P)、ニッチ(N)、バイタル(V)です。
市場シェア分析
市場シェア分析は、データ・コンバータの世界市場におけるベンダーの現状について、洞察に満ちた詳細な調査を提供する包括的なツールです。全体的な収益、顧客基盤、その他の主要指標についてベンダーの貢献度を綿密に比較・分析することで、企業の業績や市場シェア争いの際に直面する課題について理解を深めることができます。さらに、この分析により、調査対象基準年に観察された累積、断片化の優位性、合併の特徴などの要因を含む、この分野の競合特性に関する貴重な考察が得られます。このような詳細レベルの拡大により、ベンダーはより多くの情報に基づいた意思決定を行い、市場で競争優位に立つための効果的な戦略を考案することができます。
1.市場の浸透度:主要企業が提供する市場に関する包括的な情報を提示しています。
2.市場の開拓度:有利な新興市場を深く掘り下げ、成熟市場セグメントにおける浸透度を分析しています。
3.市場の多様化:新製品の発売、未開拓の地域、最近の開発、投資に関する詳細な情報を提供します。
4.競合の評価と情報:市場シェア、戦略、製品、認証、規制状況、特許状況、主要企業の製造能力について徹底的な評価を行います。
5.製品開発およびイノベーション:将来の技術、研究開発活動、画期的な製品開発に関する知的洞察を提供します。
1.データ・コンバータの世界市場の市場規模および予測は?
2.データ・コンバータの世界市場の予測期間中に投資を検討すべき製品、セグメント、用途、分野は何か?
3.データ・コンバータの世界市場の技術動向と規制枠組みは?
4.データ・コンバータの世界市場における主要ベンダーの市場シェアは?
5.データ・コンバータの世界市場への参入に適した形態や戦略的手段は?
[189 Pages Report] The Data Converter Market size was estimated at USD 6.48 billion in 2023 and expected to reach USD 6.95 billion in 2024, at a CAGR 7.67% to reach USD 10.88 billion by 2030.
Data converters are electronic devices and circuits that convert data from one form to another and are utilized across various applications ranging from consumer electronics to industrial equipment. Data converters come as single and multi-channel units. Single-channel data converters handle one data stream, translating it from digital to analog or vice versa. Multi-channel data converters process multiple streams simultaneously, which is particularly beneficial in systems where various sensors or signals must be processed in parallel. Data converters are available as integrated circuits (ICs), which contain the necessary components to perform the conversion encapsulated within a single chip. Standalone data converters are discrete components or modules that perform data conversion outside of an integrated circuit. Embedded IP (Intellectual Property) data converters refer to data conversion functionalities designed and licensed as a core to be implemented within a larger system-on-chip (SoC) or a field-programmable gate array (FPGA). The rising growth of wireless communication networks, increasing usage of high-resolution images, and proliferating development of digital technology have expanded the market scope in recent years. However, associated risk factors of the data conversion process and the limited availability of skilled and experienced workforce may hamper the market development. Nevertheless, the surging establishment of 5G infrastructure and the introduction of low-power consumption data converters create enormous prospects for market development in the coming years.
KEY MARKET STATISTICS | |
---|---|
Base Year [2023] | USD 6.48 billion |
Estimated Year [2024] | USD 6.95 billion |
Forecast Year [2030] | USD 10.88 billion |
CAGR (%) | 7.67% |
Sampling Rate: Rising usage of high-speed data converters for specialized, high-performance use cases that require precision
General-purpose data converters are devices that are commonly used to perform analog-to-digital conversion (ADC) and digital-to-analog conversion (DAC) tasks. These devices are moderately accurate and operate at standard sampling rates to convert analog waveforms into digital signals and vice versa. High-speed data converters, on the other hand, are specialized devices that can perform analog-to-digital and digital-to-analog conversion at high sampling rates, typically greater than 1 GHz. These devices are designed to enable high-speed, high-bandwidth applications such as wireless communications, instrumentation, and aerospace/defense electronics. General-purpose converters usually have lower sampling rates and precision compared to high-speed variants. They are characterized by their ease of integration, lower cost, and sufficient reliability for less demanding applications. Compared to general-purpose converters, high-speed data converters offer superior performance at higher costs. They support faster data processing, which is essential for applications with stringent timing and fidelity requirements.
Type: Growing preference for analog-to-digital converters across telecommunication and automotive industries
Analog-to-digital converters (ADCs) translate analog signals into digital data for processing by electronic systems. As the world transitions to digital technology, the usage of high-performance ADCs is increasing across industries, including telecommunications, healthcare, and automotive. For telecommunications, high-resolution ADCs with sample rates over one gigasample per second are needed for next-generation 5G wireless infrastructure and high-speed data acquisition systems. Digital-to-analog converters (DACs) convert digital signals into analog signals. The preference for DACs depends on the required analog signal output, voltage, current, resolution, and accuracy.
Resolution: Increasing usage of data converters with 20 bits for highly precise applications
The highest resolution data converters with 20 bits and above are optimal for highly precise applications where even minor signal variances need to be captured. These include medical devices, aerospace systems, and high-end audio equipment. Lower-resolution data converters with below 10 bits are sufficient for basic applications that do not require high precision, such as some industrial uses, household electronics, and certain telecommunications equipment. Data converters up to 20 bits provide a mid-range resolution that balances performance and cost-effectiveness for applications such as automotive systems, instrumentation, and some consumer electronics.
Industry: High potential of data conversion in the automotive industry to improve safety features and reduce environmental impact
In the automotive industry, self-driving, and connected vehicle technologies are advancing rapidly. Vehicles are being outfitted with sensors and systems that generate huge amounts of data about vehicle performance, component diagnostics, driver behavior, traffic patterns, and the surrounding environment. Data conversion in the automotive industry helps in improving safety features, enhancing operational efficiency, reducing environmental impact, and delivering an improved customer experience. Telecommunication companies also depend on data conversion for network planning, optimization, and customer service. As people adopt more devices and higher bandwidth services, telecoms capture massive amounts of data about network usage, service quality, device performance, and customer activity. Data conversion allows telecoms to move from a reactive to a predictive business model. Consumer electronics depend on data conversion for powering smart home systems, personal health monitoring, and entertainment devices. Data conversion solutions need to handle a wide range of data types, from audio and video to environmental sensors and biometric data. The industrial sector requires robust data conversion solutions for powering heavy machinery, advanced robotics, industrial IoT, and smart factories. Key needs include handling extremely high data volume and velocity with a low tolerance for latency. Data conversion is pivotal for enabling advanced healthcare systems, medical devices, diagnostic equipment, and electronic health records. High accuracy, security, and the ability to handle sensitive health data are critical needs.
Regional Insights
The American data converter market is well developed owing to the significant growth of communication channels and the strong presence of market players. The proliferating development of 5G infrastructure, rapid adoption of IIoT, and connected devices on an industrial scale have expanded the data converters market scope in the region. Moreover, European countries are strengthening their digital economy through rising technologies, which have raised the demand for data converters in the EMEA region. Moreover, the surging adoption of 5G technology in the United Arab Emirates (UAE) and African countries have raised the demand for wireless devices, augmenting the deployment of data converters. The Asia-Pacific region is also witnessing significant growth prospects in the forecast period due to favorable regulatory policies for semiconductor production. The escalating adoption of advanced digital technologies and devices has widened the scope for data converters in Asian countries.
FPNV Positioning Matrix
The FPNV Positioning Matrix is pivotal in evaluating the Data Converter Market. It offers a comprehensive assessment of vendors, examining key metrics related to Business Strategy and Product Satisfaction. This in-depth analysis empowers users to make well-informed decisions aligned with their requirements. Based on the evaluation, the vendors are then categorized into four distinct quadrants representing varying levels of success: Forefront (F), Pathfinder (P), Niche (N), or Vital (V).
Market Share Analysis
The Market Share Analysis is a comprehensive tool that provides an insightful and in-depth examination of the current state of vendors in the Data Converter Market. By meticulously comparing and analyzing vendor contributions in terms of overall revenue, customer base, and other key metrics, we can offer companies a greater understanding of their performance and the challenges they face when competing for market share. Additionally, this analysis provides valuable insights into the competitive nature of the sector, including factors such as accumulation, fragmentation dominance, and amalgamation traits observed over the base year period studied. With this expanded level of detail, vendors can make more informed decisions and devise effective strategies to gain a competitive edge in the market.
Key Company Profiles
The report delves into recent significant developments in the Data Converter Market, highlighting leading vendors and their innovative profiles. These include ADSANTEC, Advanced Linear Devices, Inc., Agile Analog Ltd., ams-OSRAM AG, Analog Devices, Inc., Antelope Audio, Asahi Kasei Microdevices Corporation, Avia Semiconductor (Xiamen) Ltd., Cirrus Logic, Inc., Data Device Corporation, DATEL, Inc., Faraday Technology Corporation, Infineon Technologies AG, Intel Corporation, IQ-Analog, iSine, Inc., Lansdale Semiconductor, Inc., MaxLinear Inc., Microchip Technology Inc., Mouser Electronics, Inc., NXP Semiconductors N.V., Qorvo, Inc, Renesas Electronics Corporation, ROHM CO., LTD., Semiconductor Components Industries, LLC, Skyworks Solutions, Inc., STMicroelectronics International N.V., Synopsys, Inc., Teledyne Technologies Inc., and Texas Instruments Incorporated.
Market Segmentation & Coverage
1. Market Penetration: It presents comprehensive information on the market provided by key players.
2. Market Development: It delves deep into lucrative emerging markets and analyzes the penetration across mature market segments.
3. Market Diversification: It provides detailed information on new product launches, untapped geographic regions, recent developments, and investments.
4. Competitive Assessment & Intelligence: It conducts an exhaustive assessment of market shares, strategies, products, certifications, regulatory approvals, patent landscape, and manufacturing capabilities of the leading players.
5. Product Development & Innovation: It offers intelligent insights on future technologies, R&D activities, and breakthrough product developments.
1. What is the market size and forecast of the Data Converter Market?
2. Which products, segments, applications, and areas should one consider investing in over the forecast period in the Data Converter Market?
3. What are the technology trends and regulatory frameworks in the Data Converter Market?
4. What is the market share of the leading vendors in the Data Converter Market?
5. Which modes and strategic moves are suitable for entering the Data Converter Market?