![]() |
市場調査レポート
商品コード
1722938
電子セラミックスの市場規模、シェア、動向、予測:材料、用途、エンドユーザー、地域別、2025年~2033年Electronic Ceramics Market Size, Share, Trends and Forecast by Material, Application, End User, and Region, 2025-2033 |
||||||
カスタマイズ可能
|
電子セラミックスの市場規模、シェア、動向、予測:材料、用途、エンドユーザー、地域別、2025年~2033年 |
出版日: 2025年05月01日
発行: IMARC
ページ情報: 英文 137 Pages
納期: 2~3営業日
|
電子セラミックスの世界市場規模は2024年に139億米ドルとなりました。今後、IMARC Groupは、同市場が2033年までに212億米ドルに達し、2025年から2033年にかけて4.8%のCAGRを示すと予測しています。現在、アジア太平洋地域が市場を独占しており、2024年には48.7%を超える大きな市場シェアを占めています。市場を牽引しているのは、スマートフォン、ウェアラブル、IoTシステムなどの先進電子機器に対する需要の高まりです。5G技術、再生可能エネルギーソリューション、電気自動車の著しい成長は、その優れた熱的、機械的、電気的特性により、高性能セラミックの需要をさらに促進しています。
電子セラミックスは、主に特定のアプリケーションの電子機能を実行するために使用される材料を指します。強誘電体、ピエゾセラミックス、誘電体、導電体などが、一般的に使用されているエレクトロセラミックスの一種です。強誘電体は、フェライトを主成分とする永久磁石や、電界下で圧力を加えると電荷を発生する回路デバイスで構成されています。電気的、光学的、磁気的用途に広く使用されています。無線周波数識別(RFID)、微小電気機械システム(MEM)、積層セラミック・コンデンサー(MLCC)、ノイズ・フィルター、センサー、アクチュエーターなどは、エレクトロ・セラミックスで作られた部品の一部です。従来の材料と比較して、エレクトロ・セラミック製品は電気伝導性の向上、高強度、熱・腐食安定性、耐摩耗性・耐薬品性の向上を示しています。その結果、自動車、ヘルスケア、通信、電子産業で広く使用されています。
世界の航空宇宙産業の著しい成長は、市場に明るい展望をもたらしています。これに伴い、電子セラミックスはセンサー、照明、高輝度放電ランプ、発光ダイオード(LED)、レーザー照明システム、無動力グライダーやセイルプレーン、無人航空機(UAV)、軽量航空機のアンテナ部品に使用されています。さらに、信号受信や音声伝送を目的とした携帯電話、コンピューター、コントローラーなど、さまざまな民生用電子機器に広く製品が組み込まれていることも、市場の成長を後押ししています。これとは別に、より高い密度、耐熱衝撃性、靭性、硬度、耐薬品性、耐摩耗性を示す軽量で高性能な電子セラミックスの導入が市場成長に弾みをつけています。さらに、精密な機能を必要とする画像診断やロボット手術器具での電子セラミックスの利用が増加していることも、市場成長にプラスの影響を与えています。その他、自動車分野での製品需要の増加などが、市場のさらなる成長を促すと予測されています。
The global electronic ceramics market size was valued at USD 13.9 Billion in 2024. Looking forward, IMARC Group estimates the market to reach USD 21.2 Billion by 2033, exhibiting a CAGR of 4.8% during 2025-2033. Asia-Pacific currently dominates the market, holding a significant market share of over 48.7% in 2024. The market is driven by rising demand for advanced electronic devices, including smartphones, wearables, and IoT systems. Significant growth in 5G technology, renewable energy solutions, and electric vehicles is further propelling demand for high-performance ceramics due to their superior thermal, mechanical, and electrical properties.
Electronic ceramics refer to materials that are primarily used for performing electronic functions for a particular application. Ferroelectric, piezoceramics, dielectric and conductive are some of the commonly available types of electro ceramics. They consist of ferrite-based permanent magnets and circuit devices that generate an electrical charge when pressure is applied under an electric field. They are widely used in electrical, optical, and magnetic applications. Radio-frequency identification (RFID), microelectromechanical systems (MEMs), multilayer ceramic capacitors (MLCCs), noise filters, sensors, and actuators are some of the components made of electro ceramics. As compared to traditional materials, electronic ceramic products exhibit enhanced electrical conductivity, higher strength, thermal and corrosion stability, and improved wear and chemical resistance. As a result, they are widely used across automotive, healthcare, telecommunication and electronic industries.
The significant growth in the aerospace industry across the globe is creating a positive outlook for the market. In line with this, electronic ceramics are used in sensors, lighting, high-intensity discharge lamps, light-emitting diodes (LEDs), laser lighting systems and antenna components of unpowered gliders and sailplanes, unmanned aerial vehicles (UAVs), and lighter-than-air crafts. Additionally, the widespread product incorporation in different consumer electronics, such as cell phones, computers and controllers for signal reception and voice transmission purposes, is favoring the market growth. Apart from this, the introduction of lightweight and high-performance electronic ceramics that exhibit greater density, thermal shock resistance, toughness, hardness, and chemical and wear resistance, are providing an impetus to the market growth. Moreover, the increasing utilization of electronic ceramics in diagnostic imaging and robotic surgical tools that need precision functionality is positively impacting the market growth. Other factors, including the increasing product demand in the automotive sector, are anticipated to drive the market further toward growth.
The competitive landscape of the industry has also been examined along with the profiles of the key players being Almatis GmbH, American Elements, APC International Ltd., Central Electronics Limited, CeramTec GmbH, Compagnie de Saint-Gobain S.A., CoorsTek Inc., Ferro Corporation, Ishihara Sangyo Kaisha Ltd., Noritake Co. Limited, Physik Instrumente (PI) GmbH & Co. KG., Sensor Technology Ltd. and Venator Materials PLC (Huntsman Corporation).