Product Code: A00842
According to a new report published by Allied Market Research, titled, "Screw Compressor Market," The screw compressor market was valued at $10.8 billion in 2022, and is estimated to reach $18.9 billion by 2032, growing at a CAGR of 5.8% from 2023 to 2032.
Screw compressors serve as integral components within various industries, contributing significantly to the efficient compression of air and gas. While traditional screw compressors have been fundamental in these processes, the screw compressor market is undergoing a transformative phase propelled by technological advancements and a growing emphasis on environmental sustainability. These innovative compressors are engineered with a strong focus on sustainability, reflecting the industry's commitment to reducing energy consumption and environmental impact. Unlike their conventional counterparts, these newer systems are designed to optimize energy usage, harness renewable energy sources, or utilize cleaner fuels, aligning with global initiatives to curb emissions and promote eco-friendly practices.
The integration of advanced control systems and technologies marks a new era of efficiency and adaptability in screw compressors. Smart controls and monitoring systems optimize compressor performance, enhancing operational efficiency while minimizing resource consumption. Moreover, these next-generation compressors contribute to grid stability by serving as backup power sources during peak demand periods, aiding in load balancing and reducing stress on the primary electrical grid.
As industries prioritize sustainability and eco-consciousness, the screw compressor market is evolving to embrace these innovative and environmentally friendly solutions. Ongoing research and development endeavors aim to further enhance efficiency, reduce emissions, and diversify accessible energy sources for these systems. This advancement is expected to render current screw compressors not only more cost-effective but also more reliable and widely used across industries, contributing to a more resilient and environmentally conscious industrial landscape.
The screw compressor market scope is segmented on the basis of type, stage, technology, end user, and region. By type, the market is divided into oil free and oil injected. By stage, the market is segregated into single stage, and multistage. On the basis of technology, it is bifurcated into portable and stationary. On the basis of end user, it is segregated into oil and gas, food and beverage, energy and power, chemicals and petrochemicals, and others. Region-wise, the screw compressor market trends are analyzed across North America, Europe, Asia-Pacific, and LAMEA.
Based on region, Asia-Pacific held the highest market share in terms of revenue in 2022, accounting for nearly two-fifths of the global screw compressor market size, and is likely to dominate the market during the screw compressor market forecast period. The screw compressor industry in the Asia-Pacific region is experiencing a dynamic shift driven by several key trends and growth factors. Rapid industrialization in powerhouse economies like China and India is propelling demand across diverse sectors such as
1) manufacturing, oil & gas, petrochemicals, and automotive, while an increase in emphasis on energy efficiency aligns with the region's sustainability goals, favoring screw compressors for their higher efficiency.
Competitive analysis and profiles of the major screw compressor market players, such as
1) Atlas Copco AB, Kobelco, Ingersoll Rand, Keser Kompressoren SE, Gardner Denver, Sullair, Bge Kompressoren, ELGI Equipment Limited, Quincy Compressor, and Bauer Kompressoren GmbH. are focusing their investment on technologically advanced, cost-effective, and more secure products and solutions for various applications.
Key Benefits For Stakeholders
- This report provides a quantitative analysis of the market segments, current trends, estimations, and dynamics of the screw compressor market analysis from 2022 to 2032 to identify the prevailing screw compressor market opportunities.
- The market research is offered along with information related to key drivers, restraints, and opportunities.
- Porter's five forces analysis highlights the potency of buyers and suppliers to enable stakeholders make profit-oriented business decisions and strengthen their supplier-buyer network.
- In-depth analysis of the screw compressor market share segmentation assists to determine the prevailing market opportunities.
- Major countries in each region are mapped according to their revenue contribution to the global market.
- Market player positioning facilitates benchmarking and provides a clear understanding of the present position of the market players.
- The report includes the analysis of the regional as well as global screw compressor market trends, key players, market segments, application areas, and screw compressor market growth strategies.
Additional benefits you will get with this purchase are:
- Quarterly Update and* (only available with a corporate license, on listed price)
- 5 additional Company Profile of client Choice pre- or Post-purchase, as a free update.
- Free Upcoming Version on the Purchase of Five and Enterprise User License.
- 16 analyst hours of support* (post-purchase, if you find additional data requirements upon review of the report, you may receive support amounting to 16 analyst hours to solve questions, and post-sale queries)
- 15% Free Customization* (in case the scope or segment of the report does not match your requirements, 15% is equivalent to 3 working days of free work, applicable once)
- Free data Pack on the Five and Enterprise User License. (Excel version of the report)
- Free Updated report if the report is 6-12 months old or older.
- 24-hour priority response*
- Free Industry updates and white papers.
Possible Customization with this report (with additional cost and timeline, please talk to the sales executive to know more)
- Investment Opportunities
- Technology Trend Analysis
- Regulatory Guidelines
- Strategic Recommedations
- Additional company profiles with specific to client's interest
- Additional country or region analysis- market size and forecast
- Expanded list for Company Profiles
- Historic market data
- Key player details (including location, contact details, supplier/vendor network etc. in excel format)
Key Market Segments
By Type
By Stage
By Technology
By End User
- Oil and Gas
- Food and Beverages
- Energy and Power
- Chemicals and Petrochemicals
- Others
By Region
- North America
- Europe
- Germany
- France
- Italy
- Spain
- UK
- Rest of Europe
- Asia-Pacific
- China
- Japan
- India
- South Korea
- Australia
- Rest of Asia-Pacific
- LAMEA
- Brazil
- South Africa,
- Saudi Arabia
- Rest of LAMEA
Key Market Players:
- Kobelco
- ELGI EQUIPMENTS LIMITED
- Kaeser Kompressoren SE
- Boge Kompressoren
- BAUER KOMPRESSOREN GmbH.
- Atlas Copco AB
- Sullair
- Quincy Compressor
- Ingersoll Rand
- Gardner Denver
TABLE OF CONTENTS
CHAPTER 1: INTRODUCTION
- 1.1. Report description
- 1.2. Key market segments
- 1.3. Key benefits to the stakeholders
- 1.4. Research methodology
- 1.4.1. Primary research
- 1.4.2. Secondary research
- 1.4.3. Analyst tools and models
CHAPTER 2: EXECUTIVE SUMMARY
CHAPTER 3: MARKET OVERVIEW
- 3.1. Market definition and scope
- 3.2. Key findings
- 3.2.1. Top impacting factors
- 3.2.2. Top investment pockets
- 3.3. Porter's five forces analysis
- 3.3.1. Low bargaining power of suppliers
- 3.3.2. Low threat of new entrants
- 3.3.3. Low threat of substitutes
- 3.3.4. Low intensity of rivalry
- 3.3.5. Low bargaining power of buyers
- 3.4. Market dynamics
- 3.4.1. Drivers
- 3.4.1.1. Energy efficiency demand
- 3.4.1.2. Infrastructure development
- 3.4.1.3. Replacement demand
- 3.4.2. Restraints
- 3.4.2.1. Initial investment costs
- 3.4.2.2. Economic fluctuations
- 3.4.3. Opportunities
- 3.4.3.1. Renewable energy projects
- 3.5. Value Chain Analysis
- 3.6. Key Regulation Analysis
CHAPTER 4: SCREW COMPRESSOR MARKET, BY TYPE
- 4.1. Overview
- 4.1.1. Market size and forecast
- 4.2. Oil Free
- 4.2.1. Key market trends, growth factors and opportunities
- 4.2.2. Market size and forecast, by region
- 4.2.3. Market share analysis by country
- 4.3. Oil Injected
- 4.3.1. Key market trends, growth factors and opportunities
- 4.3.2. Market size and forecast, by region
- 4.3.3. Market share analysis by country
CHAPTER 5: SCREW COMPRESSOR MARKET, BY STAGE
- 5.1. Overview
- 5.1.1. Market size and forecast
- 5.2. Single Stage
- 5.2.1. Key market trends, growth factors and opportunities
- 5.2.2. Market size and forecast, by region
- 5.2.3. Market share analysis by country
- 5.3. Multi Stage
- 5.3.1. Key market trends, growth factors and opportunities
- 5.3.2. Market size and forecast, by region
- 5.3.3. Market share analysis by country
CHAPTER 6: SCREW COMPRESSOR MARKET, BY TECHNOLOGY
- 6.1. Overview
- 6.1.1. Market size and forecast
- 6.2. Portable
- 6.2.1. Key market trends, growth factors and opportunities
- 6.2.2. Market size and forecast, by region
- 6.2.3. Market share analysis by country
- 6.3. Stationary
- 6.3.1. Key market trends, growth factors and opportunities
- 6.3.2. Market size and forecast, by region
- 6.3.3. Market share analysis by country
CHAPTER 7: SCREW COMPRESSOR MARKET, BY END USER
- 7.1. Overview
- 7.1.1. Market size and forecast
- 7.2. Oil and Gas
- 7.2.1. Key market trends, growth factors and opportunities
- 7.2.2. Market size and forecast, by region
- 7.2.3. Market share analysis by country
- 7.3. Food and Beverages
- 7.3.1. Key market trends, growth factors and opportunities
- 7.3.2. Market size and forecast, by region
- 7.3.3. Market share analysis by country
- 7.4. Energy and Power
- 7.4.1. Key market trends, growth factors and opportunities
- 7.4.2. Market size and forecast, by region
- 7.4.3. Market share analysis by country
- 7.5. Chemicals and Petrochemicals
- 7.5.1. Key market trends, growth factors and opportunities
- 7.5.2. Market size and forecast, by region
- 7.5.3. Market share analysis by country
- 7.6. Others
- 7.6.1. Key market trends, growth factors and opportunities
- 7.6.2. Market size and forecast, by region
- 7.6.3. Market share analysis by country
CHAPTER 8: SCREW COMPRESSOR MARKET, BY REGION
- 8.1. Overview
- 8.1.1. Market size and forecast By Region
- 8.2. North America
- 8.2.1. Key market trends, growth factors and opportunities
- 8.2.2. Market size and forecast, by Type
- 8.2.3. Market size and forecast, by Stage
- 8.2.4. Market size and forecast, by Technology
- 8.2.5. Market size and forecast, by End User
- 8.2.6. Market size and forecast, by country
- 8.2.6.1. U.S.
- 8.2.6.1.1. Market size and forecast, by Type
- 8.2.6.1.2. Market size and forecast, by Stage
- 8.2.6.1.3. Market size and forecast, by Technology
- 8.2.6.1.4. Market size and forecast, by End User
- 8.2.6.2. Canada
- 8.2.6.2.1. Market size and forecast, by Type
- 8.2.6.2.2. Market size and forecast, by Stage
- 8.2.6.2.3. Market size and forecast, by Technology
- 8.2.6.2.4. Market size and forecast, by End User
- 8.2.6.3. Mexico
- 8.2.6.3.1. Market size and forecast, by Type
- 8.2.6.3.2. Market size and forecast, by Stage
- 8.2.6.3.3. Market size and forecast, by Technology
- 8.2.6.3.4. Market size and forecast, by End User
- 8.3. Europe
- 8.3.1. Key market trends, growth factors and opportunities
- 8.3.2. Market size and forecast, by Type
- 8.3.3. Market size and forecast, by Stage
- 8.3.4. Market size and forecast, by Technology
- 8.3.5. Market size and forecast, by End User
- 8.3.6. Market size and forecast, by country
- 8.3.6.1. Germany
- 8.3.6.1.1. Market size and forecast, by Type
- 8.3.6.1.2. Market size and forecast, by Stage
- 8.3.6.1.3. Market size and forecast, by Technology
- 8.3.6.1.4. Market size and forecast, by End User
- 8.3.6.2. France
- 8.3.6.2.1. Market size and forecast, by Type
- 8.3.6.2.2. Market size and forecast, by Stage
- 8.3.6.2.3. Market size and forecast, by Technology
- 8.3.6.2.4. Market size and forecast, by End User
- 8.3.6.3. Italy
- 8.3.6.3.1. Market size and forecast, by Type
- 8.3.6.3.2. Market size and forecast, by Stage
- 8.3.6.3.3. Market size and forecast, by Technology
- 8.3.6.3.4. Market size and forecast, by End User
- 8.3.6.4. Spain
- 8.3.6.4.1. Market size and forecast, by Type
- 8.3.6.4.2. Market size and forecast, by Stage
- 8.3.6.4.3. Market size and forecast, by Technology
- 8.3.6.4.4. Market size and forecast, by End User
- 8.3.6.5. UK
- 8.3.6.5.1. Market size and forecast, by Type
- 8.3.6.5.2. Market size and forecast, by Stage
- 8.3.6.5.3. Market size and forecast, by Technology
- 8.3.6.5.4. Market size and forecast, by End User
- 8.3.6.6. Rest of Europe
- 8.3.6.6.1. Market size and forecast, by Type
- 8.3.6.6.2. Market size and forecast, by Stage
- 8.3.6.6.3. Market size and forecast, by Technology
- 8.3.6.6.4. Market size and forecast, by End User
- 8.4. Asia-Pacific
- 8.4.1. Key market trends, growth factors and opportunities
- 8.4.2. Market size and forecast, by Type
- 8.4.3. Market size and forecast, by Stage
- 8.4.4. Market size and forecast, by Technology
- 8.4.5. Market size and forecast, by End User
- 8.4.6. Market size and forecast, by country
- 8.4.6.1. China
- 8.4.6.1.1. Market size and forecast, by Type
- 8.4.6.1.2. Market size and forecast, by Stage
- 8.4.6.1.3. Market size and forecast, by Technology
- 8.4.6.1.4. Market size and forecast, by End User
- 8.4.6.2. Japan
- 8.4.6.2.1. Market size and forecast, by Type
- 8.4.6.2.2. Market size and forecast, by Stage
- 8.4.6.2.3. Market size and forecast, by Technology
- 8.4.6.2.4. Market size and forecast, by End User
- 8.4.6.3. India
- 8.4.6.3.1. Market size and forecast, by Type
- 8.4.6.3.2. Market size and forecast, by Stage
- 8.4.6.3.3. Market size and forecast, by Technology
- 8.4.6.3.4. Market size and forecast, by End User
- 8.4.6.4. South Korea
- 8.4.6.4.1. Market size and forecast, by Type
- 8.4.6.4.2. Market size and forecast, by Stage
- 8.4.6.4.3. Market size and forecast, by Technology
- 8.4.6.4.4. Market size and forecast, by End User
- 8.4.6.5. Australia
- 8.4.6.5.1. Market size and forecast, by Type
- 8.4.6.5.2. Market size and forecast, by Stage
- 8.4.6.5.3. Market size and forecast, by Technology
- 8.4.6.5.4. Market size and forecast, by End User
- 8.4.6.6. Rest of Asia-Pacific
- 8.4.6.6.1. Market size and forecast, by Type
- 8.4.6.6.2. Market size and forecast, by Stage
- 8.4.6.6.3. Market size and forecast, by Technology
- 8.4.6.6.4. Market size and forecast, by End User
- 8.5. LAMEA
- 8.5.1. Key market trends, growth factors and opportunities
- 8.5.2. Market size and forecast, by Type
- 8.5.3. Market size and forecast, by Stage
- 8.5.4. Market size and forecast, by Technology
- 8.5.5. Market size and forecast, by End User
- 8.5.6. Market size and forecast, by country
- 8.5.6.1. Brazil
- 8.5.6.1.1. Market size and forecast, by Type
- 8.5.6.1.2. Market size and forecast, by Stage
- 8.5.6.1.3. Market size and forecast, by Technology
- 8.5.6.1.4. Market size and forecast, by End User
- 8.5.6.2. South Africa,
- 8.5.6.2.1. Market size and forecast, by Type
- 8.5.6.2.2. Market size and forecast, by Stage
- 8.5.6.2.3. Market size and forecast, by Technology
- 8.5.6.2.4. Market size and forecast, by End User
- 8.5.6.3. Saudi Arabia
- 8.5.6.3.1. Market size and forecast, by Type
- 8.5.6.3.2. Market size and forecast, by Stage
- 8.5.6.3.3. Market size and forecast, by Technology
- 8.5.6.3.4. Market size and forecast, by End User
- 8.5.6.4. Rest of LAMEA
- 8.5.6.4.1. Market size and forecast, by Type
- 8.5.6.4.2. Market size and forecast, by Stage
- 8.5.6.4.3. Market size and forecast, by Technology
- 8.5.6.4.4. Market size and forecast, by End User
CHAPTER 9: COMPETITIVE LANDSCAPE
- 9.1. Introduction
- 9.2. Top winning strategies
- 9.3. Product mapping of top 10 player
- 9.4. Competitive dashboard
- 9.5. Competitive heatmap
- 9.6. Top player positioning, 2022
CHAPTER 10: COMPANY PROFILES
- 10.1. Atlas Copco AB
- 10.1.1. Company overview
- 10.1.2. Key executives
- 10.1.3. Company snapshot
- 10.1.4. Operating business segments
- 10.1.5. Product portfolio
- 10.1.6. Business performance
- 10.1.7. Key strategic moves and developments
- 10.2. Ingersoll Rand
- 10.2.1. Company overview
- 10.2.2. Key executives
- 10.2.3. Company snapshot
- 10.2.4. Operating business segments
- 10.2.5. Product portfolio
- 10.2.6. Business performance
- 10.2.7. Key strategic moves and developments
- 10.3. Gardner Denver
- 10.3.1. Company overview
- 10.3.2. Key executives
- 10.3.3. Company snapshot
- 10.3.4. Operating business segments
- 10.3.5. Product portfolio
- 10.4. Kaeser Kompressoren SE
- 10.4.1. Company overview
- 10.4.2. Key executives
- 10.4.3. Company snapshot
- 10.4.4. Operating business segments
- 10.4.5. Product portfolio
- 10.5. Sullair
- 10.5.1. Company overview
- 10.5.2. Key executives
- 10.5.3. Company snapshot
- 10.5.4. Operating business segments
- 10.5.5. Product portfolio
- 10.6. Boge Kompressoren
- 10.6.1. Company overview
- 10.6.2. Key executives
- 10.6.3. Company snapshot
- 10.6.4. Operating business segments
- 10.6.5. Product portfolio
- 10.6.6. Key strategic moves and developments
- 10.7. ELGI EQUIPMENTS LIMITED
- 10.7.1. Company overview
- 10.7.2. Key executives
- 10.7.3. Company snapshot
- 10.7.4. Operating business segments
- 10.7.5. Product portfolio
- 10.7.6. Business performance
- 10.8. Quincy Compressor
- 10.8.1. Company overview
- 10.8.2. Key executives
- 10.8.3. Company snapshot
- 10.8.4. Operating business segments
- 10.8.5. Product portfolio
- 10.9. BAUER KOMPRESSOREN GmbH.
- 10.9.1. Company overview
- 10.9.2. Key executives
- 10.9.3. Company snapshot
- 10.9.4. Operating business segments
- 10.9.5. Product portfolio
- 10.10. Kobelco
- 10.10.1. Company overview
- 10.10.2. Key executives
- 10.10.3. Company snapshot
- 10.10.4. Operating business segments
- 10.10.5. Product portfolio