![]() |
市場調査レポート
商品コード
1733263
自動タイヤ空気充填システムの市場:タイプ別、コンポーネント別、車種別、地域別、2026~2032年Automatic Tire Inflation System Market By Type (Central Continuous), By Component (Air Delivery System, Buffer Tank, Compressor, ECU, Housing, Pressure Sensor, Rotary Union), By Vehicle Type (On-highway, Off-highway), And Region for 2026-2032 |
||||||
|
自動タイヤ空気充填システムの市場:タイプ別、コンポーネント別、車種別、地域別、2026~2032年 |
出版日: 2025年04月30日
発行: Verified Market Research
ページ情報: 英文 202 Pages
納期: 2~3営業日
|
自動タイヤ空気注入システム市場は、燃費効率と最適化されたタイヤケアへのニーズの高まりにより成長しています。Verified Market Researchのアナリストによると、自動タイヤ空気注入システム市場は、2024年の約9億3,000万米ドルを下回り、予測期間2032年に22億1,000万米ドルの評価に達すると推定されます。
車両の安全性向上とビジネスフリートにおけるダウンタイム削減の需要が、自動タイヤ空気注入システム市場を牽引しています。これにより、市場は2026~2032年にかけてCAGR 11.5%で成長します。
自動タイヤ空気充填システム市場定義/概要
自動タイヤ空気充填システム(ATIS)は、手動による介入を必要とせずにタイヤの空気充填を自動的に適正に保つ技術です。多くの場合、自動車のタイヤシステムに組み込まれたセンサ、バルブ、エアコンプレッサーで構成されています。センサがタイヤ空気充填をモニタリングし、あらかじめ設定されたしきい値を下回ると、システムがコンプレッサーを作動させ、タイヤに必要な空気充填まで空気を入れます。空気充填が規定値を超えると、システムは空気を放出して過膨張を防ぎます。
さらにATISは、商用トラック、軍用車両、オフロード機器など、多くの産業で広く利用されています。ATISの主要目的は、タイヤが常に最適な空気充填に保たれるようにすることで、安全性を高め、タイヤの寿命を延ばし、燃費を向上させ、車両性能を最大化することです。
ATISはリアルタイムでタイヤの空気充填を適正に維持し、自動車の燃費を大幅に向上させます。適切なタイヤ空気充填は、燃料消費に直接影響する転がり抵抗を減らすために非常に重要です。タイヤの空気充填が常に適正であることを保証することで、ATISは燃料消費を最小限に抑え、それによって二酸化炭素排出量も削減することができます。気候変動に対する世界の関心の高まりと、よりサステイナブル代替輸送手段の探求を考慮すると、この効率化は特に不可欠です。その結果、世界中の政府や組織がATISのようなエコフレンドリー技術を採用し、支援する傾向が高まっています。
タイヤの空気充填を適正に保つことは、自動車の安全な操縦性と安定性に不可欠です。タイヤの空気充填が低いと、コントロール性が低下し、停止距離が長くなり、吹き飛びなどのタイヤトラブルのリスクが高まります。ATISは常にタイヤの空気充填をモニタリング・調整し、車両の安全性と性能を確保しています。これはATISにとって重要なセールスポイントです。というのも、自動車の所有者とメーカーの双方にとって、安全性は依然として最優先事項であり、タイヤの健康状態と車両の性能を一貫して管理できるシステムに対する需要が高まっているからです。
さらに、タイヤ関連の懸念はダウンタイムを生み、運用コストを上昇させています。ATISは、タイヤの寿命を延ばし、人手によるタイヤの点検やメンテナンスの必要性を減らすことで、こうしたコストを削減し、車両の運用効率を全体的に向上させます。ATISの経済的メリットは、収益性と効率性を高める方法を常に模索している商用車オペレーターがATISを採用する強力な根拠となっています。
ATISシステムの確立と維持にかかる費用が高いことが、普及の大きな障害となっています。特に価格に敏感な大規模フリートや個人ユーザーにとっては、ATISの購入と設置の初期費用は高額です。
また、ATISはタイヤの寿命を延ばし、燃費を向上させることによって長期的なメンテナンス費用を最小限に抑えることを目的としているが、システム自体には定期的なメンテナンスが必要です。潜在的なユーザーによっては、初期費用や経常費用が、認識されるメリットを上回り、特に投資対効果がすぐには明らかでない場合があります。
ATISは、車両の既存システムと統合しなければならない複雑な技術を伴います。この複雑さは、特に古い車両や、もともとそのようなシステムをサポートするように作られていないモデルにおいて、互換性の懸念を引き起こします。このような車両にATISを後付けするのは困難であり、不可能な場合も多いです。
さらに、システムが複雑なため、設置、保守、修理に専門家の訓練が必要となり、小規模な事業者や自動車サービスのインフラが整備されていない地域では採用が進まないです。
The Automatic Tire Inflation System Market is growing due to the rising need for fuel efficiency and optimized tire care. According to the analyst from Verified Market Research, the Automatic Tire Inflation System Market is estimated to reach a valuation of USD 2.21 Billion over the forecast period 2032, subjugating around USD 0.93 Billion valued in 2024.
The demand for improved vehicle safety and reduced downtime in business fleets is driving the Automatic Tire Inflation System Market forward. It enables the market to grow at a CAGR of 11.5% from 2026-2032.
Automatic Tire Inflation System Market: Definition/ Overview
An automatic tire inflation system (ATIS) is a technology that automatically maintains proper tire pressure without requiring manual intervention. It is often made up of sensors, valves, and an air compressor integrated into a vehicle's tire system. The sensors monitor tire pressure, and if it falls below the preset threshold, the system triggers the compressor to inflate the tire to the desired pressure. When the pressure exceeds the specified limit, the system releases air to prevent overinflation.
Furthermore, ATIS is widely utilized in many industries, including commercial trucks, military vehicles, and off-road equipment. Its major goal is to increase safety, lengthen tire life, improve fuel efficiency, and maximize vehicle performance by ensuring tires are continually inflated at the optimum pressure, lowering the risk of blowouts, increasing traction, and reducing overall tire wear and tear.
ATIS assists in maintaining proper tire pressure in real-time, considerably increasing vehicle fuel efficiency. Proper tire inflation is critical for reducing rolling resistance, which directly affects fuel consumption. By ensuring that tires are constantly properly inflated, ATIS can minimize fuel consumption and thereby carbon emissions. This efficiency is especially essential in light of the growing worldwide concern about climate change and the quest for more sustainable transportation alternatives. As a result, governments and organizations around the world are more likely to adopt and support environmentally friendly technology such as ATIS.
Correct tire inflation is essential for safe vehicle handling and stability. Under-inflated tires can result in less control, longer stopping distances, and an increased risk of tire problems, such as blowouts. ATIS constantly monitors and adjusts tire pressure to ensure vehicle safety and performance. This is an important selling feature for ATIS, as safety is still a top priority for both vehicle owners and manufacturers, increasing demand for systems that can consistently manage tire health and vehicle performance.
Furthermore, tire-related concerns create downtime, raising operational costs. ATIS lowers these costs by extending tire life and lowering the need for human tire checkups and maintenance, improving fleet operational efficiency overall. The economic benefits of ATIS are a strong rationale for its adoption by commercial vehicle operators, who are constantly looking for methods to increase profitability and efficiency.
The high expense of establishing and maintaining ATIS systems is a significant obstacle to wider use. The initial cost of purchasing and installing ATIS is high, particularly for large fleets or individual users who are price-sensitive.
Also, while ATIS is intended to minimize long-term maintenance costs by extending tire life and boosting fuel efficiency, the system itself requires regular maintenance. For some potential users, the initial and recurring costs outweigh the perceived benefits, particularly if the return on investment is not immediately apparent.
ATIS involves complicated technology that must be integrated with a vehicle's existing systems. This intricacy causes compatibility concerns, especially in older vehicles or models that were not originally built to support such systems. Retrofitting ATIS into such vehicles is difficult and often impossible.
Furthermore, the system's complexity necessitates specialist training for installation, maintenance, and repair, which discourages adoption among smaller operators or in areas with less developed automotive service infrastructure.
According to VMR analysis, the central tire inflation system (CTIS) segment is estimated to hold the largest market share during the forecast period. CTIS enables drivers to alter tire pressure on the fly, responding to diverse terrains and situations, which is especially useful for vehicles operating in off-road, agricultural, military, and construction environments. This function improves vehicle performance by enhancing traction, minimizing soil compaction in agricultural applications, and boosting fuel efficiency.
CTIS' versatility and direct impact on performance and operational efficiency make it suitable for a wide range of applications, contributing to its market domination.
Furthermore, the central tire inflation system has gained popularity in commercial and military vehicles due to its significant advantages in terms of mobility, fuel efficiency, and tire life.
Commercial fleets stress efficiency and cost-cutting techniques, whereas military vehicles require greater mobility and adaptability in difficult terrains. The high demand in the diverse industries is boosting the CTIS market since these systems address important operational needs.
The ECU (Electronic Control Unit) segment is estimated to dominate the Automatic Tire Inflation System Market during the forecast period. The ATIS's brain is the ECU, which monitors tire pressure via sensors and decides when to inflate or deflate the tires to maintain appropriate pressure levels.
The ECU's pivotal role makes it vital to the ATIS's functionality, as it directly controls the system's operations based on real-time data. The need for precise and dependable control in guaranteeing vehicle safety and efficiency raises the ECU's status in the system, increasing its market share.
Furthermore, advances in microprocessor technology, software algorithms, and data analytics have had a substantial impact on ECUs. These developments have improved its ability to handle complicated datasets quickly and make precise tire pressure adjustments under different driving situations.
Also, current ECUs are designed to work smoothly with other vehicle components, such as telematics and vehicle management software, to provide a comprehensive approach to vehicle performance and maintenance. ECUs' rising sophistication and integration capabilities make them a focus point for innovation in the ATIS sector, contributing to their market dominance.
According to VMR Analyst, North America is estimated to dominate the Automatic Tire Inflation System Market during the forecast period. North America, particularly the United States, has a huge and well-developed road transportation sector. This sector relies largely on commercial vehicles, such as trucks and trailers, to move goods over long distances.
Automatic tire inflation systems are critical for maintaining proper tire pressure, lowering maintenance costs, and increasing fuel efficiency in these vehicles. The huge volume of commercial vehicle utilization in North America greatly increases the demand for ATIS.
Furthermore, North America is home to some of the world's finest automotive technology companies, as well as a strong research and development infrastructure. This environment promotes ATIS innovation, including improvements in system dependability, efficiency, and integration with other vehicle systems. The availability of a robust technological foundation and supportive infrastructure speeds up the development and deployment of ATIS.
Asia Pacific region is estimated to exhibit the highest growth of the automotive tire inflation system market during the forecast period. Asia Pacific is a key automobile manufacturing region, with China, India, Japan, and South Korea leading the way in both new vehicle production and acceptance. The burgeoning automotive sector in these countries, driven by rising population and economic levels, increases demand for advanced vehicle technology such as ATIS.
As more people and organizations in the region invest in cars, particularly commercial and off-road vehicles, the need for ATIS to improve fuel efficiency, safety, and vehicle performance grows.
Furthermore, the Asia Pacific region is rapidly developing its road infrastructure and logistics industry to enable economic growth and regional integration. This development necessitates a big fleet of commercial vehicles for transporting commodities throughout the region.
As these trucks routinely travel long distances, there is an increasing demand for technology such as ATIS that can lower maintenance costs, increase vehicle uptime, and improve fuel efficiency. The expansion of the region's road infrastructure and logistics industry serves as a driver for ATIS adoption.
The competitive landscape of the automatic tire inflation system (ATIS) market is defined by a constant interplay of technology breakthroughs, regulatory frameworks, and changing client needs. Also, the competitive landscape is driven by issues such as government legislation requiring the installation of tire pressure monitoring systems (TPMS) in vehicles, which increases competition among ATIS suppliers to produce compliant and efficient solutions.
Some of the prominent players operating in the Automatic Tire Inflation System Market include:
Aperia Technologies Inc., Bridgestone Corporation, Continental AG, Dana Limited, Goodyear Tire & Rubber Company, Hendrickson USA, Meritor, Michelin, Parker Hannifin Corp, SAF-Holland S.A., WABCO, Rotex Automation, STEMCO Products Inc., Haltec Corporation, TI Fluid Systems, IDEX Corporation, Airgo Systems, VIGIA, Trans Technologies Company, PSI.
In April 2021, Danfoss Editron created waves when it announced a partnership with Meritor Inc. and Electra Commercial Vehicles to expand its product portfolio.
In March 2019, Dana Incorporated formed a strategic agreement with Hyliion Inc., a Class 8 electrification firm, to strengthen its market position and strive toward sustainability.