UV硬化コーティングの世界市場規模：樹脂タイプ別、用途別、エンドユーザー産業別、地域別、範囲および予測

UV硬化コーティングの市場規模と予測

UV硬化コーティングの市場規模は、2024年に81億5,000万米ドルと評価され、2024年から2031年にかけて12%のCAGRで成長し、2031年には201億9,000万米ドルに達すると予測されます。UV硬化コーティングは、紫外線（UV）を利用して化学反応を起こし、コーティングをほぼ瞬時に硬化させる保護コーティングの一種です。これらのコーティング剤は通常、光重合開始剤、樹脂、その他の添加剤の組み合わせで構成され、紫外線を照射すると硬化します。硬化の過程でコーティング剤が重合するため、耐久性に優れた高性能の仕上がりになります。UV硬化コーティングは、その迅速な硬化時間と優れた特性により、様々な産業で広く使用されています。自動車産業では、傷や化学薬品に強い高光沢で耐久性のある仕上げが可能です。エレクトロニクス業界では、UV硬化コーティングは回路基板や部品を環境による損傷から保護するために使用されています。

また、印刷業界では高品質で長持ちする印刷物を作るために、家具業界では傷がつきにくく美しい表面を作るために使用されています。

UV硬化コーティングの世界市場力学

UV硬化コーティングの世界市場を形成している主な市場力学

主な市場促進要因

迅速な硬化時間：

UV硬化コーティングは、従来のコーティングと比較して硬化時間が非常に速いため、生産効率とスループットが大幅に向上します。この迅速な処理により、メーカーのダウンタイムと運用コストが削減され、市場導入が促進されます。米国エネルギー省（DOE）が2024年1月に発表した報告書によると、UV硬化コーティングは従来のコーティングが数時間から数日かかるのに対し、わずか1～3秒で硬化します。この迅速な硬化により、過去1年間にUV硬化技術を採用したメーカーの生産効率は30%向上しています。

耐久性と性能の向上：

UV硬化コーティングは、傷や化学薬品、紫外線に対する耐久性に優れているため、高性能な用途に最適です。長持ちする仕上がりと信頼性は、堅牢な保護ソリューションを求める業界を魅了しています。米国国立標準技術研究所（NIST）は2024年3月、UV硬化コーティングは従来の溶剤型コーティングと比較して、耐スクラッチ性が最大50%、耐薬品性が最大40%優れているという研究結果を発表しました。

環境規制：

環境規制の高まりと環境に優しいソリューションの推進が、UV硬化コーティングの採用を後押ししています。UV硬化コーティングは一般的に揮発性有機化合物（VOC）の排出量が少なく、溶剤系塗料よりも環境に優しいと考えられています。米国環境保護庁（EPA）は2023年12月、従来の溶剤型塗料が30～50％であるのに対し、UV硬化型塗料は一般的にVOCの含有量が5％未満であると報告しました。これにより、塗装業界からのVOC排出量は2020年以降20%削減されています。

技術の進歩：

UV LED技術の革新により、UV硬化コーティングの効率とコスト効率が向上しました。UV LED硬化装置の進歩により、応用範囲が拡大し、UV硬化技術の利用しやすさが向上しています。DOEの国立再生可能エネルギー研究所（NREL）は2024年2月、新しいUV LED硬化システムは従来の水銀灯よりもエネルギー効率が最大75％高く、寿命も最大10倍長いと発表しました。

主な課題

高額な初期投資：

UV硬化装置や技術のコストは高く、中小企業にとっては障壁となります。この初期投資により、市場参入や採用が制限される企業もあります。

基材適合性：

UV硬化コーティング剤は、特定のプラスチックや金属を含むすべての基材によく接着するわけではないです。特に特殊な用途では、幅広い材料との適合性を確保することが課題となっています。

UV透過の制限：

複雑な形状や厚いコーティングの用途では、UV光の透過が制限され、硬化プロセスに影響を与えることがあります。その結果、硬化が不完全になり、コーティング性能が低下する可能性があります。

健康と安全への懸念：

UV硬化コーティングに使用されるUV光や特定の化学物質への暴露は、適切に管理されない場合、健康上のリスクを引き起こす可能性があります。適切な安全対策と作業者の保護を確保することは非常に重要であるが、コーティング工程が複雑になります。

技術的限界：

UV硬化型塗料は、その進歩にもかかわらず、従来の塗料に比べ柔軟性や耐衝撃性に限界があります。これらの特性を強化し、進化する市場の需要に応えるためには、継続的な開発が必要です。

主な動向

UV LED技術の進歩：

UV LED硬化技術へのシフトは、UV硬化コーティング市場に変革をもたらしつつあります。UV LEDはエネルギー効率、運用コストの削減、低発熱を実現し、さまざまな用途でますます普及しています。米国エネルギー省（DOE）が2024年3月に発表した報告書によると、UV LED硬化システムは従来の水銀灯よりもエネルギー効率が最大85%向上しています。また、UV LEDシステムの平均寿命は、水銀ランプの2,000時間に対し、25,000時間となっています。

環境に優しいソリューションの成長：

規制の強化や持続可能性の動向により、環境に優しいコーティングの需要が高まっています。揮発性有機化合物（VOC）の排出量が少なく、環境への影響が少ないUV硬化型塗料は、環境に優しい代替品としてますます支持されています。米国環境保護庁（EPA）が2024年1月に発表した報告書によると、UV硬化型塗料のVOC含有量は、従来の溶剤型塗料の25～40%に比べ、現在は通常2%未満となっています。

工業用途の拡大：

UV硬化コーティングは、自動車、エレクトロニクス、3Dプリンティングなどの分野で新たな用途を見出しています。その汎用性、硬化時間の速さ、耐久性の向上により、より幅広い工業プロセスや製品への採用が進んでいます。米国労働統計局が2024年4月に発表したデータによると、UV硬化コーティングを利用する産業の雇用は2023年に4.8%増加し、自動車とエレクトロニクス分野が成長を牽引しています。

目次

第1章 イントロダクション

• 市場の定義
• 市場セグメンテーション
• 調査手法

第2章 エグゼクティブサマリー

• 主な調査結果
• 市場概要
• 市場ハイライト

第3章 市場概要

• 市場規模と成長の可能性
• 市場動向
• 市場促進要因
• 市場抑制要因
• 市場機会
• ポーターのファイブフォース分析

第4章 UV硬化コーティング市場：樹脂タイプ別

• アクリル化エポキシ
• ポリエステル
• ポリエーテル
• ウレタン
• その他

第5章 UV硬化コーティング市場：用途別

• 木材コーティング
• プラスチック塗料
• 金属コーティング
• 紙・板紙コーティング
• ガラスコーティング
• その他

第6章 UV硬化コーティング市場：最終用途産業別

• 家具およびフローリング
• 自動車
• エレクトロニクス
• グラフィックアートと印刷
• 包装
• 建設

第7章 地域分析

• 北米
• 米国
• カナダ
• メキシコ
• 欧州
• 英国
• ドイツ
• フランス
• イタリア
• アジア太平洋
• 中国
• 日本
• インド
• オーストラリア
• ラテンアメリカ
• ブラジル
• アルゼンチン
• チリ
• 中東・アフリカ
• 南アフリカ
• サウジアラビア
• アラブ首長国連邦

第8章 市場力学

• 市場促進要因
• 市場抑制要因
• 市場機会
• COVID-19の市場への影響

第9章 競合情勢

• 主要企業
• 市場シェア分析

第10章 企業プロファイル

• AkzoNobel NV
• PPG Industries
• Nippon Paints
• Dymax Corp.
• The Sherwin-Williams Company
• Ashland Coatings
• Cardinal Paint
• Jainco Industry Chemicals
• Keyland Polymer
• Master Bond Inc.
• Protech Powder Coatings Inc.
• Red Spot Paint & Varnish Company
• Seagrave Coatings Corp.
• Watson Coatings

第11章 市場の展望と機会

• 新興技術
• 今後の市場動向
• 投資機会

第12章 付録

• 略語リスト
• 出典と参考文献

UV-Cured Coatings Market Size And Forecast

UV-Cured Coatings Market size was valued at USD 8.15 Billion in 2024 and is projected to reach USD 20.19 Billion by 2031, growing at a CAGR of 12% from 2024 to 2031. UV-cured coatings are a type of protective coating that uses ultraviolet (UV) light to initiate a chemical reaction, curing the coating almost instantly. These coatings typically consist of a combination of photoinitiators, resins, and other additives that harden upon exposure to UV light. The curing process involves the polymerization of the coating material, resulting in a durable, high-performance finish. UV-cured coatings are widely used in various industries due to their rapid curing times and superior properties. In the automotive industry, they provide a high-gloss, durable finish that resists scratches and chemicals. In electronics, UV-cured coatings are employed to protect circuit boards and components from environmental damage.

Additionally, these coatings are used in the printing industry for high-quality, long-lasting prints and in the furniture sector to offer a scratch-resistant and aesthetically pleasing surface.

Global UV-Cured Coatings Market Dynamics

The key market dynamics that are shaping the global UV-cured coatings market include:

Key Market Drivers

Rapid Curing Times:

UV-cured coatings offer extremely fast curing times compared to traditional coatings, significantly increasing production efficiency and throughput. This rapid processing reduces downtime and operational costs for manufacturers, driving market adoption. According to a report by the U.S. Department of Energy (DOE) published in January 2024, UV-cured coatings can cure in as little as 1-3 seconds, compared to hours or days for traditional coatings. This rapid curing has led to a 30% increase in production efficiency for manufacturers who have adopted UV-curing technology in the past year.

Enhanced Durability and Performance:

The superior durability of UV-cured coatings, including resistance to scratches, chemicals, and UV light, makes them ideal for high-performance applications. Their long-lasting finish and reliability attract industries seeking robust protective solutions. The National Institute of Standards and Technology (NIST) released a study in March 2024 showing that UV-cured coatings demonstrate up to 50% higher scratch resistance and 40% better chemical resistance compared to traditional solvent-based coatings.

Environmental Regulations:

Increasing environmental regulations and a push for eco-friendly solutions are driving the adoption of UV-cured coatings. These coatings typically have low volatile organic compound (VOC) emissions and are considered more environmentally friendly than solvent-based alternatives. The U.S. Environmental Protection Agency (EPA) reported in December 2023 that UV-cured coatings typically contain less than 5% VOCs, compared to 30-50% in traditional solvent-based coatings. This has led to a 20% reduction in VOC emissions from the coating industry since 2020.

Technological Advancements:

Innovations in UV LED technology have enhanced the efficiency and cost-effectiveness of UV-cured coatings. Advances in UV LED curing equipment are expanding the scope of applications and improving the accessibility of UV-cured technologies. The DOE's National Renewable Energy Laboratory (NREL) announced in February 2024 that new UV LED curing systems are up to 75% more energy-efficient than traditional mercury vapor lamps, while also lasting up to 10 times longer.

Key Challenges:

High Initial Investment:

The cost of UV curing equipment and technology can be high, posing a barrier for small and medium-sized enterprises. This initial investment may limit market entry and adoption for some companies.

Substrate Compatibility:

UV-cured coatings may not adhere well to all substrates, including certain plastics and metals. Ensuring compatibility with a wide range of materials remains a challenge, particularly in specialized applications.

Limited UV Penetration:

In applications with complex geometries or thick coatings, UV light may have limited penetration, affecting the curing process. This can lead to incomplete curing and compromised coating performance.

Health and Safety Concerns:

Exposure to UV light and certain chemicals used in UV-cured coatings can pose health risks if not properly managed. Ensuring adequate safety measures and worker protection is crucial but adds complexity to the coating process.

Technological Limitations:

Despite advancements, UV-cured coatings may face limitations in terms of flexibility and impact resistance compared to some traditional coatings. Ongoing development is needed to enhance these properties and meet evolving market demands.

Key Trends

Advancement in UV LED Technology:

The shift towards UV LED curing technology is transforming the UV-cured coatings market. UV LEDs offer energy efficiency, reduced operational costs, and lower heat generation, making them increasingly popular across various applications. According to a report published by the U.S. Department of Energy (DOE) in March 2024 UV LED curing systems are now up to 85% more energy-efficient than traditional mercury vapor lamps. The average lifespan of UV LED systems has increased to 25,000 hours, compared to 2,000 hours for mercury vapor lamps.

Growth in Eco-Friendly Solutions:

There is a growing demand for environmentally friendly coatings due to stricter regulations and sustainability trends. UV-cured coatings, with their low volatile organic compound (VOC) emissions and reduced environmental impact, are increasingly favored as green alternatives. The U.S. Environmental Protection Agency (EPA) released a report in January 2024 stating UV-cured coatings now typically contain less than 2% VOCs, compared to 25-40% in traditional solvent-based coatings.

Expansion in Industrial Applications:

UV-cured coatings are finding new applications in sectors such as automotive, electronics, and 3D printing. Their versatility, rapid curing times, and enhanced durability are driving their adoption in a broader range of industrial processes and products. The U.S. Bureau of Labor Statistics published data in April 2024 showing that employment in industries utilizing UV-cured coatings increased by 4.8% in 2023, with the automotive and electronics sectors leading the growth.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global UV-Cured Coatings Market Regional Analysis

Here is a more detailed regional analysis of the global UV-cured coatings market:

North America

North America is a leading region in the UV-cured coatings market, driven by robust industrial activities and a high level of technological advancement. According to a report published by the U.S. Department of Commerce in February 2024, North American UV-cured coatings market was valued at USD 3.2 Billion in 2023, with a projected CAGR of 7.5% from 2024 to 2028.The United States accounted for approximately 80% of the North American market, while Canada represented about 15%.

The United States and Canada benefit from a well-established manufacturing base, especially in automotive, electronics, and printing sectors, which use UV-cured coatings extensively. The automotive sector accounted for 30% of UV-cured coatings consumption in Canada, followed by electronics at 25% and printing at 20%.

Additionally, increasing regulatory pressures for eco-friendly solutions and the adoption of advanced UV LED technology are propelling market growth in this region. The Canadian government announced in February 2024 new regulations aimed at reducing VOC emissions from industrial coatings, expected to drive further adoption of UV-cured technologies.

Asia Pacific

The Asia-Pacific region is experiencing rapid growth in the UV-cured coatings market, with countries like China, Japan, and India leading the way. The Asia-Pacific UV-cured coatings market was valued at USD 5.8 Billion in 2023, with a projected CAGR of 9.2% from 2024 to 2028.

This growth is fueled by the expansion of manufacturing industries, increasing industrial automation, and rising demand in end-use sectors such as automotive and electronics. For instance, Asian Paints reported in February 2024 a 25% year-over-year increase in sales of their UV-cured coatings for the furniture industry in India, attributing the growth to increased adoption of modern manufacturing technologies.

The region's burgeoning economies and increasing adoption of advanced coating technologies contribute to its dynamic market landscape. The Indian Ministry of Chemicals and Fertilizers released a report in April 2024 stating The Indian UV-cured coatings market experienced a growth of 15.2% in 2023, reaching a value of 62 billion rupees (approximately USD 750 Million USD).The automotive sector led the growth, with a 40% increase in UV-cured coatings consumption compared to the previous year..

Global UV-Cured Coatings Market: Segmentation Analysis

The Global UV-Cured Coatings Market is Segmented on the basis of Resin Type, Application, End-User Industry, and Geography.

UV-Cured Coatings Market, By Application

• Wood Coatings
• Plastic Coatings
• Metal Coatings
• Paper and Paperboard Coatings
• Glass Coatings

Based on Application, the Global UV-Cured Coatings Market is bifurcated into Wood Coatings, Plastic Coatings, Metal Coatings, Paper and Paperboard Coatings, Glass Coatings. In the UV-cured coatings market, wood coatings currently dominate the segment due to their widespread use in furniture, cabinetry, and flooring applications, where durability and aesthetics are critical. These coatings are preferred for their high-quality finish and protection against wear and environmental factors. Meanwhile, the plastic coatings segment is experiencing rapid growth, driven by the increasing use of UV-cured coatings in automotive parts, electronics, and consumer goods. The ability of UV-cured coatings to provide a high-performance finish on diverse plastic substrates is expanding their application across various industries.

UV-Cured Coatings Market, By Resin Type

• Acrylated Epoxies
• Polyesters
• Polyethers
• Urethanes

Based on Resin Type, the Global UV-Cured Coatings Market is bifurcated into Acrylated Epoxies, Polyesters, Polyethers, and Urethanes. In the UV-cured coatings market, acrylated epoxies are currently the dominant resin type due to their excellent chemical resistance, durability, and versatility, making them suitable for a wide range of applications including industrial, automotive, and electronics. However, the urethanes segment is rapidly growing, driven by their superior flexibility, abrasion resistance, and enhanced performance in various demanding applications. The increasing demand for high-performance coatings that can withstand extreme conditions is propelling the adoption of urethane-based UV-cured coatings.

UV-Cured Coatings Market, By End-User Industry

• Furniture and Flooring
• Automotive
• Electronics
• Graphic Arts and Printing
• Packaging
• Construction

Based on End-User Industry, the Global UV-Cured Coatings Market is bifurcated into Furniture and Flooring, Automotive, Electronics, Graphic Arts and Printing, Packaging, Construction. In the UV-cured coatings market, the furniture and flooring segment is currently the dominant end-use industry, driven by the demand for durable, high-quality finishes that enhance the appearance and longevity of wood surfaces. This segment benefits from the superior performance characteristics of UV-cured coatings, such as scratch resistance and fast curing times. Meanwhile, the packaging segment is experiencing rapid growth, fueled by the increasing need for eco-friendly and high-performance coatings in food and beverage packaging. UV-cured coatings offer advantages like quick curing and low volatile organic compound (VOC) emissions, aligning with the packaging industry's sustainability goals and driving its expansion.

UV-Cured Coatings Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the World

Based on Geography, the Global UV-Cured Coatings Market is classified into North America, Europe, Asia Pacific, and the Rest of the World. In the UV-cured coatings market, North America is the dominant region, driven by a well-established manufacturing sector and high demand for advanced coating solutions in industries such as automotive, electronics, and furniture. The region's strong focus on technological innovation and stringent environmental regulations further bolster its leadership. Conversely, the Asia-Pacific region is the fastest-growing segment, fueled by rapid industrialization, increasing manufacturing activities, and a rising adoption of UV-cured coatings across various applications. The burgeoning economies in countries like China, India, and Japan are significantly contributing to this dynamic growth.

Key Players

• The "Global UV-Cured Coatings Market" study report will provide valuable insight with an emphasis on the global market. The major players in the market are
• AkzoNobel NV, PPG Industries, Nippon Paints, Dymax Corp, The Sherwin-Williams Company, Ashland Coatings, Cardinal Paint, Jainco Industry Chemicals.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

Global UV-Cured Coatings Market Key Developments

• In February 2021, AkzoNobel introduced a new line of UV-cured coatings designed for the automotive industry. These coatings are engineered to offer superior durability and enhanced finish quality, addressing the growing demand for high-performance, eco-friendly solutions.
• In July 2022, PPG Industries launched an innovative UV-cured coating system that significantly reduces cure times and improves energy efficiency. The new system is aimed at increasing production speed while minimizing environmental impact.
• In October 2023, BASF announced the development of a new range of UV-cured coatings featuring advanced scratch resistance and chemical durability. These coatings are designed for use in high-traffic commercial spaces and industrial applications.
• In January 2024, Sherwin-Williams unveiled a groundbreaking UV-cured coating technology that incorporates nanomaterials to enhance surface hardness and longevity. This technology is expected to set new standards for performance in various coating applications.

TABLE OF CONTENTS

1. Introduction

• Market Definition
• Market Segmentation
• Research Methodology

2. Executive Summary

• Key Findings
• Market Overview
• Market Highlights

3. Market Overview

• Market Size and Growth Potential
• Market Trends
• Market Drivers
• Market Restraints
• Market Opportunities
• Porter's Five Forces Analysis

4. UV-Cured Coatings Market, By Resin Type

• Acrylated Epoxies
• Polyesters
• Polyethers
• Urethanes
• Others

5. UV-Cured Coatings Market, By Application

• Wood Coatings
• Plastic Coatings
• Metal Coatings
• Paper and Paperboard Coatings
• Glass Coatings
• Others

6. UV-Cured Coatings Market, By End-Use Industry

• Furniture and Flooring
• Automotive
• Electronics
• Graphic Arts and Printing
• Packaging
• Construction

7. Regional Analysis

• North America
• United States
• Canada
• Mexico
• Europe
• United Kingdom
• Germany
• France
• Italy
• Asia-Pacific
• China
• Japan
• India
• Australia
• Latin America
• Brazil
• Argentina
• Chile
• Middle East and Africa
• South Africa
• Saudi Arabia
• UAE

8. Market Dynamics

• Market Drivers
• Market Restraints
• Market Opportunities
• Impact of COVID-19 on the Market

9. Competitive Landscape

• Key Players
• Market Share Analysis

10. Company Profiles

• AkzoNobel NV
• PPG Industries
• Nippon Paints
• Dymax Corp.
• The Sherwin-Williams Company
• Ashland Coatings
• Cardinal Paint
• Jainco Industry Chemicals
• Keyland Polymer
• Master Bond Inc.
• Protech Powder Coatings Inc.
• Red Spot Paint & Varnish Company
• Seagrave Coatings Corp.
• Watson Coatings

11. Market Outlook and Opportunities

• Emerging Technologies
• Future Market Trends
• Investment Opportunities

12. Appendix

• List of Abbreviations
• Sources and References