![]() |
市場調査レポート
商品コード
1370774
電動トラクションモータ市場- 世界の産業規模、シェア、動向、機会、2018~2028年予測タイプ別、定格電力別、用途別、地域別、競合別に区分Electric Traction Motor Market - Global Industry Size, Share, Trends, Opportunity, and Forecast 2018-2028 Segmented By Type, By Power Rating, By Application, By Region, Competition |
||||||
カスタマイズ可能
|
電動トラクションモータ市場- 世界の産業規模、シェア、動向、機会、2018~2028年予測タイプ別、定格電力別、用途別、地域別、競合別に区分 |
出版日: 2023年10月03日
発行: TechSci Research
ページ情報: 英文 190 Pages
納期: 2~3営業日
|
電動トラクションモーターの世界市場は、予測期間2024年から2028年にかけて堅調なペースで成長すると予想されます。
さらに、世界各地の大都市開発の一環として地下鉄網が成長していることから、電動トラクション・モーターの需要が増加すると予測されます。
トラクション・モーターは、機械の動力源として使用される電気モーターです。モーターハウジングの内側に巻かれた界磁巻線と呼ばれる太いワイヤーと、電機子と呼ばれるモーターの内側シャフトに巻かれたワイヤーで構成され、電気エネルギーはブラシによって2つの要素間で伝達されます。ブラシは、電機子の露出したシャフトが乗る小さなバネ付き金属片です。多くのシステムがエンジンに使用され、余分なエネルギーを転換したり、電気を使ってモーターを逆回転させたり、ブレーキとして機能します。世界中で使用されているトラクション・モーターには、さまざまなサイズと種類があります。しかし、最も一般的に認識されているのはディーゼル機関車です。機関車のディーゼルエンジンは、実際に列車を動かす電気モーターに電力を供給する大きな発電機を駆動します。エスカレーターや電気自動車、さらには洗濯機に電力を供給するモーターの正式名称は、トラクション・モーターです。交流(AC)および直流(DC)電気モーターは、多くの機械のトラクション・モーターの設計に使用されてきたが、最も成功した設計はACモーターです。
例えば、エレベーターのモーターは特別に設計された電気モーターです。迅速な加速と減速を確保するためには、エレベーター・モーターの可動部の慣性をできるだけ小さくする必要があります。そのため、エレベーターの駆動に使われる電気モーターは、比較的小さな直径の電機子で設計されています。エレベーターの運転には低速モーターが好ましいです。通常、エレベーター・モーターの回転数は900 rpmを超えないことが望ましいです。
市場概要 | |
---|---|
予測期間 | 2024-2028 |
市場規模2022年 | 136億5,000万米ドル |
2028年の市場規模 | 352億5,000万米ドル |
CAGR 2023-2028 | 16.18% |
急成長セグメント | 産業用 |
最大市場 | 北米 |
電気牽引モーターは、煙や石炭の粉塵がないため、他の牽引システムと比べて環境に優しいです。したがって無公害です。水や石炭の貯蔵が不要なため、国内での利用可能性が極めて低い高品位石炭を節約できます。これは、必要な電気エネルギーを線路から直接得られるからです。照明や扇風機のために電気牽引用の発電機を追加する必要もないです。一般にディーゼル機関車は、巨大な内燃機関の暖機時間がかかるため、始動に時間がかかります。そのため、ディーゼル機関車の運行には時間のロスが生じる。しかし、電気機関車では出発までの時間のロスがないです。保守・運転コストが比較的安い(ディーゼル機関車より約30%安い)。電気機関車の保守・修理に要する時間は、他の機関車に比べて大幅に短く、必要であれば95%以上運転することができます。電気牽引は、特に電気代が安い交通密度の高い地域で最も経済的です。電気モーターによるトルクは連続的であるため、電化車両の振動は少ないです。容量が大きく走行速度が速いため、列車は蒸気機関車の約2倍の交通量を処理できます。突然の一時的な過負荷が発生しても、システムは送電網からより多くのエネルギーを引き出せるため、問題は生じないです。列車の本数が少ない時間帯に区間を分けることで、活発な運行を維持することができます。こうした要因が、世界の電気牽引モーター市場の成長を牽引しています。
今後数年間、電気牽引モーター市場には多くの投資が見込まれます。さらに、この時期は多くの新しい最先端のトラクション・モーターが導入される時期でもあります。ハイブリッド電気トラクション・モーターのイントロダクションは、市場拡大のチャンスを数多く開くと思われます。中国では、すでに電気自動車の需要が非常に高まっています。電気トラクション・モーターによって、自動車の二酸化炭素排出量は減少します。多くの国が二酸化炭素排出削減技術への投資を増やしています。将来的には、エネルギー効率の高い機器の使用について、政府による規制が強化されることが予想されます。これも電気牽引モーター市場の拡大に寄与している要素です。例えば、インドの電気自動車(EV)販売台数は、2021年の322,877台から2022年には100万台に達し、300%以上増加すると予想されています。国際エネルギー機関(IEA)によると、2020年のEVに対する消費者支出は2019年から50%増加して総額1,200億米ドルに達し、EV普及を促進するための政府の支援策は総額140億米ドルに達しました。さらに、道路を走る電気自動車、バス、バン、大型トラックの数は、2030年までに世界で1億4,500万台に達すると予想されています。
本レポートでは、電動トラクションモーターの世界市場を以下のカテゴリーに分類し、さらに業界動向についても詳述しています。
(注:企業リストはお客様のご要望に応じてカスタマイズ可能です。)
Global Electric Traction Motor Market is expected to grow at a robust pace in the forecast period 2024-2028, owing to significant investments in e-mobility to offset rising carbon emissions by several nations. In addition, the growth of the metro network as a part of developing the Metropolitan cities around the world, is projected to increase demand for electric traction motors.
A traction motor is an electric motor used to power a machine. Consisting of thick wires called field windings wrapped inside the motor housing and wires wrapped around the inner shaft of the motor called the armature, electrical energy is transferred between the two elements by means of brushes. A brush is a small spring-loaded metal piece on which the exposed shaft of the armature rides. Many systems are used in engines to divert excess energy as well as use electricity to reverse the motor and act as a brake. There are many different sizes and types of traction motors used around the world. However, the most commonly recognized form is found in diesel locomotives. The locomotive's diesel engine drives a large generator that powers the electric motor that actually powers the train. The full name for the motor that powers escalators, electric vehicles, and even washing machines is a traction motor. Both alternating current (AC) and direct current (DC) electric motors have been used as traction motor designs for many machines, but the most successful designs have been with AC motors.
For instance, elevator motors are specially designed electric motors. To ensure rapid acceleration and deceleration, the inertia of the moving parts of the elevator motor should be kept as low as possible. Therefore, the electric motors used to drive elevators are designed with relatively small diameter armatures. Low speed motors are preferred for elevator operation. Normally the elevator motor speed should not exceed 900 rpm.
Market Overview | |
---|---|
Forecast Period | 2024-2028 |
Market Size 2022 | USD 13.65 Billion |
Market Size 2028 | USD 35.25 Billion |
CAGR 2023-2028 | 16.18% |
Fastest Growing Segment | Industrial |
Largest Market | North America |
The electric traction motor is environment friendly as compared to all other traction systems as there is no smoke or coal dust. It is therefore pollution-free. No water or coal storage is required, saving high-grade coal, which has very low domestic availability. This is because the required electrical energy can be obtained directly from the line. No additional generators for electric traction to power lights and fans are required. In general, diesel locomotives take a long time to start because of the warm-up time of the huge internal combustion engine. This leads to loss of time when operating diesel locomotives. However, with an electric locomotive, there is no loss of time until departure. Maintenance and operating costs are relatively low (approximately 30% cheaper than diesel locomotives). The time required for maintenance and repair work on electric locomotives is significantly less compared to other locomotives, and if necessary, an electric locomotive can be driven more than 95%. Electric traction is most economical in areas with high traffic density, especially when electricity is cheap. Vibration in electrified vehicles is low because the torque applied by the electric traction motor is continuous. Due to their higher capacity and higher running speeds, trains can handle nearly twice as much traffic as steam locomotives. During periods of sudden temporary overload, the system is able to draw more energy from the grid, so no problems arise. By dividing the train into sections during times when there are few trains, it is possible to maintain a lively operation. These factors are driving the growth in the Global Electric Traction Motor Market.
In the coming years, there is likely to be a lot of investments in the market for electric traction motors. Additionally, this is a time when many new, cutting-edge traction motors are introduced. The introduction of a hybrid electric traction motor will open up numerous market expansion opportunities. In China, there is already a very high demand for electric automobiles. Vehicle carbon emissions are decreased with electric traction motors. Many countries are increasing their investments in carbon emission-reduction technologies. In the future, there is expected to be more government control on the usage of energy-efficient equipment. It is another element contributing to the market expansion for electric traction motors. For instance, India's electric vehicle (EV) sales were expected to hit 1 million in 2022, up from 322,877 in 2021, up more than 300%. According to the International Energy Agency, consumer spending on EVs in 2020 increased 50% from 2019 to total USD120 billion, and government support measures to boost EV adoption totaled USD14 billion. Moreover, the number of electric vehicles, buses, vans and heavy trucks on the roads is expected to reach 145 million worldwide by 2030.
In March 2023, Siemens, the largest manufacturer of passenger trains in the United States, is building a USD220 million factory in North Carolina to manufacture passenger coaches. The company expects increased demand for commuter and intercity rail services and said the new facility will make it easier to serve customers on the East Coast. This second plant to serve American railroads for the Munich-based manufacturer will be built on 200-acre site in Lexington, North Carolina and is expected to open in 2024. This investment is driving the electric traction motor market growth in the country.
Another example for the global electric traction motor market growth is in Asia-Pacific region, Indian Railways has received a capital issue of USD28.8 billion (INR 2.4 lakh crore) from Indian government in the 2023-2024 budget. Indian Railways is focused on introducing 75 of Vande Bharat trains by August 2023. The allocation for vehicle purchases has more than doubled from the revised estimate for 2022-2023 to USD 4,550.2 million (INR 37,581 crore). Meanwhile, a tender to manufacture 200 Vande Bharat trains is expected to be awarded shortly. This investment is expected to drive the electric traction motor market growth in the region.
The Global Electric Traction Motor Market is segmented based on type, power rating, application, region and competitive landscape. Based on type, the market is bifurcated into alternating current and direct current. Based on power rating, the market is segmented into below 200 kW, 200 - 400 kW and Above 400 kW. Based on application, the market is further divided into railway, electric vehicle, industrial machinery and others.
The main market players in the Global Electric Traction Motor Market are ABB Ltd, Siemens AG, General Electric Company, Kirloskar Electric Company Ltd, CG Power and Industrial Solutions Ltd, CRRC Corporation Limited, Alstom SA, Toshiba Corporation, Skoda Transportation AS, Robert Bosch GmbH.
In this report, Global Electric Traction Motor Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below.
(Note: The companies list can be customized based on the client requirements.)