南米のセラミック射出成形市場の2028年までの予測：地域別分析- タイプ別、業界別

南米のセラミック射出成形市場は、2022年に1,079万米ドルと評価され、2028年には1,653万米ドルに達すると予測され、2022年から2028年にかけて7.4%のCAGRで成長すると予測されています。

ヘルスケア産業の著しい拡大が南米のセラミック射出成形市場に燃料を供給

医療とヘルスケア分野の発展と成長は、業界の需要をエスカレートさせています。セラミック射出成形は、補綴物、歯科インプラント、内視鏡ツール、ピンセット、はさみなど、さまざまな医療部品の製造に使用されています。いくつかの治療分野における歯科インプラントの用途の増加は、補綴物に対する需要の高まりと相まって、市場機会を生み出すと考えられています。また、スポーツ外傷や交通事故による歯科損傷の増加も、歯科インプラントの需要を促進する重要な要因の一つと考えられています。さらに、先進国および新興国市場全体で低侵襲の美容整形手術に対する高い需要が、市場成長を促進すると予測されています。ライフスタイルの変化と美意識の高まりが美容整形への需要を刺激し、美容外科の成長を増大させると予測されています。米国形成外科学会が発表した「形成外科統計レポート」によると、2020年には約1,560万件の美容整形手術が実施されました。このように、急速に拡大するヘルスケア・医療分野は、今後数年間、セラミック射出成形市場の成長を牽引すると予測されます。

南米のセラミック射出成形市場概要

南米のセラミック射出成形市場は、ブラジル、アルゼンチン、その他南米に区分されます。この地域のセラミック射出成形市場は、確立された自動車産業の存在と消費者のセラミック製品に対する需要の高まりにより、顕著な成長が見込まれています。ブラジルの自動車産業は急速なペースで成長しています。セラミック射出成形部品は、バルブ部品、ターボローター、スワールチャンバー、バルブシート、ラジアルローターなどに広く使用されています。このように、この地域には確立された自動車産業が存在するため、セラミック射出成形市場には大きな成長の可能性があります。

南米のセラミック射出成形市場の収益と2028年までの予測（金額）

南米のセラミック射出成形市場のセグメンテーション

南米のセラミック射出成形市場は、タイプ、業界別、国別に区分されます。タイプ別では、南米のセラミック射出成形市場はアルミナ、ジルコニア、その他に区分されます。アルミナセグメントが2022年に最大の市場シェアを占めました。

産業別では、南米のセラミック射出成形市場は産業機械、自動車、ヘルスケア、電気・電子、消費財、その他に区分されます。2022年にはヘルスケア分野が最大の市場シェアを占めています。

国別に見ると、南米のセラミック射出成形市場はブラジル、アルゼンチン、その他南米に区分されます。ブラジルが2022年の南米のセラミック射出成形市場シェアを独占しました。

MICRO、INMATEC、WITTMANN Technology GmbH、Morgan Advanced Materialsは、南米のセラミック射出成形市場に参入している大手企業です。

目次

第1章 イントロダクション

第2章 キーポイント

第3章 調査手法

• 調査範囲
• 調査手法
  • データ収集
  • 一次インタビュー
  • 仮説の策定
  • マクロ経済要因分析
  • 基礎数値の作成
  • データの三角測量
  • 国レベルのデータ

第4章 南米のセラミック射出成形市場情勢

• 市場概要
  • 南米のPEST分析
• 専門家の見解
• エコシステム分析

第5章 南米のセラミック射出成形市場：主要市場力学

• 市場促進要因
  • セラミック射出成形が提供する様々な利点
  • 様々な最終用途産業におけるセラミック射出成形技術の高い利用率
• 市場抑制要因
  • 時間のかかるセラミック部品の製造工程
• 市場機会
  • セラミック射出成形が提供する設計の柔軟性と低コストに関する意識の高まり
• 今後の動向
  • ヘルスケア産業の著しい拡大
• 促進要因と抑制要因の影響分析

第6章 セラミック射出成形：南米市場分析

第7章 南米のセラミック射出成形市場分析：タイプ別

• 南米のセラミック射出成形市場：タイプ別（2021年、2028年）
• アルミナ
• ジルコニア
• その他

第8章 南米のセラミック射出成形市場分析：産業別

• 南米のセラミック射出成形市場：産業別（2021年、2028年）
• 産業機械
• 自動車
• ヘルスケア
• 電気・電子
• 消費財
• その他

第9章 南米のセラミック射出成形市場：国別分析

第10章 業界情勢

• 市場イニシアティブ
• 新製品開発
• 合併と買収

第11章 企業プロファイル

• INMATEC Technologies GmbH
• Wittmann Technology GmbH
• MICRO
• Morgan Advanced Materials

第12章 付録

List Of Tables

• Table 1. South America Ceramic Injection Molding Market -Revenue and Forecast to 2028 (US$ Million)
• Table 2. Brazil Ceramic Injection Molding Market, By Type - Revenue and Forecast to 2028 (US$ Million)
• Table 3. Brazil Ceramic Injection Molding Market, by Industrial Vertical - Revenue and Forecast to 2028 (US$ Million)
• Table 4. Argentina Ceramic Injection Molding Market, By Type - Revenue and Forecast to 2028 (US$ Million)
• Table 5. Argentina Ceramic Injection Molding Market, by Industrial Vertical - Revenue and Forecast to 2028 (US$ Million)
• Table 6. Rest of South America Ceramic Injection Molding Market, By Type - Revenue and Forecast to 2028 (US$ Million)
• Table 7. Rest of South America Ceramic Injection Molding Market, by Industrial Vertical - Revenue and Forecast to 2028 (US$ Million)
• Table 8. Glossary of Terms, South America Ceramic Injection Molding Market

List Of Figures

• Figure 1. South America Ceramic Injection Molding Market Segmentation
• Figure 2. South America Ceramic Injection Molding Market Segmentation - By Country
• Figure 3. South America Ceramic Injection Molding Market Overview
• Figure 4. South America Ceramic Injection Molding Market, By Type
• Figure 5. South America Ceramic Injection Molding Market, by Country
• Figure 7. South America PEST Analysis
• Figure 8. South America Expert Opinion
• Figure 9. South America Ceramic Injection Molding Market - Ecosystem Analysis
• Figure 10. South America Ceramic Injection Molding Market Impact Analysis of Driver and Restraints
• Figure 11. South America Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• Figure 12. South America Ceramic Injection Molding Market Revenue Share, By Type (2021 and 2028)
• Figure 13. Alumina: South America Ceramic Injection Molding Market - Revenue and Forecast To 2028 (US$ Million)
• Figure 14. Zirconia: South America Ceramic Injection Molding Market - Revenue and Forecast To 2028 (US$ Million)
• Figure 15. Others: South America Ceramic Injection Molding Market - Revenue and Forecast To 2028 (US$ Million)
• Figure 16. South America Ceramic Injection Molding Market Revenue Share, By Industrial Vertical (2021 and 2028)
• Figure 17. Industrial Machinery: South America Ceramic Injection Molding Market - Revenue and Forecast To 2028 (US$ Million)
• Figure 18. Automotive: South America Ceramic Injection Molding Market - Revenue and Forecast To 2028 (US$ Million)
• Figure 19. Healthcare: South America Ceramic Injection Molding Market - Revenue and Forecast To 2028 (US$ Million)
• Figure 20. Electrical and Electronics: South America Ceramic Injection Molding Market - Revenue and Forecast To 2028 (US$ Million)
• Figure 21. Consumer Goods: South America Ceramic Injection Molding Market- Revenue and Forecast To 2028 (US$ Million)
• Figure 22. Others: South America Ceramic Injection Molding Market- Revenue and Forecast To 2028 (US$ Million)
• Figure 23. South America: Ceramic Injection Molding Market, by Key Country - Revenue (2021) (US$ Million)
• Figure 24. South America: Ceramic Injection Molding Market Revenue Share, by Key Country (2021 and 2028)
• Figure 25. Brazil: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• Figure 26. Argentina: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• Figure 27. Rest of South America: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)

The South America ceramic injection molding market was valued at US$ 10.79 million in 2022 and is expected to reach US$ 16.53 million by 2028; it is estimated to grow at a CAGR of 7.4% from 2022 to 2028.

Tremendous Expansion of Healthcare Industry fuel the South America Ceramic Injection Molding Market

The development and growth in the medical and healthcare sectors are escalating the industry demand. Ceramic injection molding is used to manufacture various medical components such as prosthetic replacements, dental implants, endoscopic tools, tweezers, and scissors. Rising dental implant applications in several therapeutic areas, coupled with the escalating demand for prosthetics, are considered to create market opportunities. The increasing number of dental injuries due to sports injuries and road accidents are also regarded as some of the significant factors favoring the demand for dental implants. Furthermore, the high demand for minimally invasive cosmetic surgery across developed and developing regions is projected to propel the market growth. Changing lifestyles and increased beauty consciousness stimulate the demand for cosmetic procedures, which is anticipated to augment cosmetic surgeries' growth. As per the 'Plastic Surgery Statistics Report' published by the American Society of Plastic Surgeons, nearly 15.6 million cosmetic procedures were conducted in 2020. Thus, it is projected that the rapidly expanding healthcare and medical sectors will likely drive the growth of ceramic injection molding market in the coming years.

South America Ceramic Injection Molding Market Overview

The South America ceramic injection molding market is segmented into Brazil, Argentina, and Rest of South America. The ceramic injection molding market in the region is expected to witness a notable growth owing to the presence of well-established automotive industry coupled with rising demand for ceramic items among consumers. The automotive industry in Brazil is growing at a rapid pace. Ceramic injection molded components are widely used in the automobiles in valve components, turbo rotors, swirl chambers, valve seats, radial rotors, among others. Thus, the presence of well-established automotive industry in the region provides strong growth potential to the ceramic injection molding market.

South America Ceramic Injection Molding Market Revenue and Forecast to 2028 (US$ Million)

South America Ceramic Injection Molding Market Segmentation

The South America ceramic injection molding market is segmented based on type, industry vertical, and country. Based on type, the South America ceramic injection molding market is segmented into alumina, zirconia, and others. The alumina segment held the largest market share in 2022.

Based on industry vertical, the South America ceramic injection molding market is segmented into industrial machinery, automotive, healthcare, electrical and electronics, consumer goods, and others. The healthcare segment held the largest market share in 2022.

Based on country, the South America ceramic injection molding market is segmented into Brazil, Argentina, and the Rest of South America. Brazil dominated the South America ceramic injection molding market share in 2022.

MICRO; INMATEC; WITTMANN Technology GmbH; and Morgan Advanced Materials are some leading of the leading players operating in the South America ceramic injection molding market.

Reasons to Buy:

• Save and reduce time carrying out entry-level research by identifying the growth, size, leading players, and segments in the South America ceramic injection molding market.
• Highlights key business priorities in order to assist companies to realign their business strategies
• The key findings and recommendations highlight crucial progressive industry trends in the South America ceramic injection molding market, thereby allowing players across the value chain to develop effective long-term strategies
• Develop/modify business expansion plans by using substantial growth offering developed and emerging markets
• Scrutinize in-depth South America market trends and outlook coupled with the factors driving the South America ceramic injection molding market, as well as those hindering it
• Enhance the decision-making process by understanding the strategies that underpin commercial interest with respect to client products, segmentation, pricing, and distribution

Table Of Contents

1. Introduction

• 1.1 Study Scope
• 1.2 The Insight Partners Research Report Guidance
• 1.3 Market Segmentation
  • 1.3.1 South America Ceramic Injection Molding Market, by Type
  • 1.3.2 South America Ceramic Injection Molding Market, by Industry Vertical
  • 1.3.3 South America Ceramic Injection Molding Market, by Country

2. Key Takeaways

3. Research Methodology

• 3.1 Scope of the Study
• 3.2 Research Methodology
  • 3.2.1 Data Collection:
  • 3.2.2 Primary Interviews:
  • 3.2.3 Hypothesis formulation:
  • 3.2.4 Macro-economic factor analysis:
  • 3.2.5 Developing base number:
  • 3.2.6 Data Triangulation:
  • 3.2.7 Country level data:

4. South America Ceramic Injection Molding Market Landscape

• 4.1 Market Overview
  • 4.2.1 South America PEST Analysis
• 4.3 Expert Opinion
• 4.4 Ecosystem Analysis

5. South America Ceramic Injection Molding Market - Key Market Dynamics

• 5.1 Market Drivers
  • 5.1.1 Various Advantages Offered by Ceramic Injection Molding
  • 5.1.2 High Utilization of Ceramic Injection Molding Technology across Various End-Use Industries
• 5.2 Market Restraints
  • 5.2.1 Time Consuming Production Process of Ceramic Parts
• 5.3 Market Opportunities
  • 5.3.1 Increasing Awareness Regarding Design Flexibility and Low-Cost Offered by Ceramic Injection Molding
• 5.4 Future Trends
  • 5.4.1 Tremendous Expansion of Healthcare Industry
• 5.5 Impact Analysis of Drivers and Restraints

6. Ceramic Injection Molding- South America Market Analysis

• 6.1 South America Ceramic Injection Molding Market -Revenue and Forecast to 2028 (US$ Million)

7. South America Ceramic Injection Molding Market Analysis - By Type

• 7.1 Overview
• 7.2 South America Ceramic Injection Molding Market, By Type (2021 and 2028)
• 7.3 Alumina
  • 7.3.1 Overview
  • 7.3.2 Alumina: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• 7.4 Zirconia
  • 7.4.1 Overview
  • 7.4.2 Zirconia: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• 7.5 Others:
  • 7.5.1 Overview
  • 7.5.2 Others: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)

8. South America Ceramic Injection Molding Market Analysis - By Industrial Vertical

• 8.1 Overview
• 8.2 South America Ceramic Injection Molding Market, By Industrial Vertical (2021 and 2028)
• 8.3 Industrial Machinery
  • 8.3.1 Overview
  • 8.3.2 Industrial Machinery: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• 8.4 Automotive
  • 8.4.1 Overview
  • 8.4.2 Automotive: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• 8.5 Healthcare
  • 8.5.1 Overview
  • 8.5.2 Healthcare: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• 8.6 Electrical and Electronics
  • 8.6.1 Overview
  • 8.6.2 Electrical and Electronics: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
• 8.7 Consumer Goods
  • 8.7.1 Overview
  • 8.7.2 Consumer Goods: Ceramic Injection Molding Market- Revenue and Forecast to 2028 (US$ Million)
• 8.8 Others
  • 8.8.1 Overview
  • 8.8.2 Others: Ceramic Injection Molding Market- Revenue and Forecast to 2028 (US$ Million)

9. South America Ceramic Injection Molding Market - Country Analysis

• 9.1 South America: Ceramic Injection Molding Market
  • 9.1.1 South America: Ceramic Injection Molding Market, by Key Country
    • 9.1.1.1 Brazil: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
      • 9.1.1.1.1 Brazil: Ceramic Injection Molding Market, By Type
      • 9.1.1.1.2 Brazil: Ceramic Injection Molding Market, by Industrial Vertical
    • 9.1.1.2 Argentina: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
      • 9.1.1.2.1 Argentina: Ceramic Injection Molding Market, By Type
      • 9.1.1.2.2 Argentina: Ceramic Injection Molding Market, by Industrial Vertical
    • 9.1.1.3 Rest of South America: Ceramic Injection Molding Market - Revenue and Forecast to 2028 (US$ Million)
      • 9.1.1.3.1 Rest of South America: Ceramic Injection Molding Market, By Type
      • 9.1.1.3.2 Rest of South America: Ceramic Injection Molding Market, by Industrial Vertical

10. Industry Landscape

• 10.1 Overview
• 10.2 Market Initiative
• 10.3 New Product Development
• 10.4 Merger and Acquisition

11. Company Profiles

• 11.1 INMATEC Technologies GmbH
  • 11.1.1 Key Facts
  • 11.1.2 Business Description
  • 11.1.3 Products and Services
  • 11.1.4 Financial Overview
  • 11.1.5 SWOT Analysis
  • 11.1.6 Key Developments
• 11.2 Wittmann Technology GmbH
  • 11.2.1 Key Facts
  • 11.2.2 Business Description
  • 11.2.3 Products and Services
  • 11.2.4 Financial Overview
  • 11.2.5 SWOT Analysis
  • 11.2.6 Key Developments
• 11.3 MICRO
  • 11.3.1 Key Facts
  • 11.3.2 Business Description
  • 11.3.3 Products and Services
  • 11.3.4 Financial Overview
  • 11.3.5 SWOT Analysis
  • 11.3.6 Key Developments
• 11.4 Morgan Advanced Materials
  • 11.4.1 Key Facts
  • 11.4.2 Business Description
  • 11.4.3 Products And Services
  • 11.4.4 Financial Overview
  • 11.4.5 SWOT Analysis
  • 11.4.6 Key Developments

12. Appendix

• 12.1 About The Insight Partners
• 12.2 Glossary of Terms