![]() |
市場調査レポート
商品コード
1636709
航空宇宙用潤滑剤市場の2030年までの予測:潤滑剤タイプ、航空機タイプ、機能、用途、エンドユーザー、地域別の世界分析Aerospace Lubricants Market Forecasts to 2030 - Global Analysis By Lubricant Type (Synthetic Lubricants, Mineral Oil-Based Lubricants and Bio-Based Lubricants), Aircraft Type, Functionality, Application, End User and By Geography |
||||||
カスタマイズ可能
|
航空宇宙用潤滑剤市場の2030年までの予測:潤滑剤タイプ、航空機タイプ、機能、用途、エンドユーザー、地域別の世界分析 |
出版日: 2025年01月01日
発行: Stratistics Market Research Consulting
ページ情報: 英文 200+ Pages
納期: 2~3営業日
|
Stratistics MRCによると、航空宇宙用潤滑剤の世界市場は2024年に26億4,000万米ドルを占め、予測期間中のCAGRは6.2%で成長し、2030年には37億9,000万米ドルに達する見込みです。
航空宇宙用潤滑剤は、航空機や宇宙船のシステムにおける摩擦、摩耗、発熱を低減するために設計された特殊なオイル、グリース、その他の物質です。これらの潤滑剤は、高高度、温度変化、圧力変化など、航空や宇宙探査で遭遇する極限状態に対応するように調合されています。エンジン、着陸装置、油圧装置など、さまざまな部品に使用され、性能、寿命、安全性を高めます。
国際航空運送協会IATAによると、航空機を利用する旅客数は2019年の45億人から急増し、2024年には47億人に達すると予想されています。
世界の空の旅の増加
航空会社の運航便数が増えるにつれて、エンジン、ギアボックス、その他の重要部品の摩耗や損傷が激しくなり、最適な性能と長寿命を確保するために高品質の潤滑剤が必要となります。さらに、より燃費の良い新型航空機の開発により、より高い圧力と温度に対応できる高度な潤滑剤が必要とされています。航空機の安全性と性能に対する注目の高まりとともに、このような航空機旅行の増加傾向は、さまざまな航空部門における航空宇宙用潤滑剤の需要を促進しています。
複雑な処方要件
航空宇宙用潤滑剤の複雑な配合要件は、高圧、高温、多様な使用環境といった極限状態に耐える必要性から生じる。処方は、耐摩耗性、耐腐食性、潤滑性、熱安定性のバランスを取る必要があり、多くの場合、高度な添加剤と精密な化学物質の組み合わせが必要になります。このような複雑さは、開発に必要な製造コスト、時間、専門知識を増大させる。こうした要因は、入手しやすさを制限し、コストを上昇させ、新しい効率的な潤滑剤技術の採用を遅らせることによって、市場の成長を妨げる可能性があります。
持続可能なソリューションへの需要の高まり
航空会社や製造業者は二酸化炭素排出量の削減を目指しており、その結果、生分解性や再生可能な資源から作られた潤滑剤へのシフトが進んでいます。これらの潤滑剤は、効率的な性能を確保するだけでなく、業界の持続可能性の目標にも貢献しています。さらに、環境に優しい添加剤の進歩と環境規制へのコンプライアンスの推進が、市場の成長をさらに刺激しています。この動向は、航空宇宙分野における持続可能性向上のための世界の取り組みと一致しており、環境への影響を最小限に抑える潤滑剤の使用を奨励しています。
特殊潤滑剤の高コスト
航空宇宙用特殊潤滑剤のコストが高いのは、主にその高度な配合、厳しい品質基準、極端な温度と圧力に耐えるための高性能添加剤の必要性によるものです。これらの潤滑剤は、高価な原材料を使用して製造されることが多く、信頼性と安全性のために厳しい試験が行われます。このコスト要因は、特に中小企業や予算重視の事業にとっては市場成長の妨げとなり、これらの潤滑剤の普及を制限しています。
COVID-19の影響
COVID-19の大流行は、世界の空の旅を減少させ、航空機の生産とメンテナンス活動の低下につながることで、航空宇宙用潤滑剤市場に大きな影響を与えました。旅行の制限と閉鎖により、民間航空における潤滑剤の需要は減少し、市場全体に影響を与えました。しかし、軍事・防衛分野では混乱は少なかった。産業が回復するにつれ、航空旅行、航空機整備、航空機製造の増加が、パンデミック後の市場成長を牽引し、潤滑剤需要を押し上げると予想されます。
予測期間中、摩耗防止セグメントが最大になる見込み
耐摩耗性分野は、その長寿命と性能の向上により、予測期間を通じて最大の市場シェアを確保すると予測されます。これらの潤滑剤は、可動部品間の摩擦を低減し、航空業界で一般的な高圧・高温条件下での摩耗や破損を防ぐために配合されています。これらの潤滑剤は、エンジン、ベアリング、その他の重要なシステムにおいて最適な性能を維持するように設計されており、スムーズな動作を保証し、早期故障を防止します。
ギアボックス用潤滑剤分野は予測期間中に最も高いCAGRが見込まれる
ギアボックス用潤滑剤分野は、予測期間中に最も高いCAGRが見込まれます。ギアボックス用途で使用される航空宇宙用潤滑剤は、航空機のトランスミッション・システムの円滑かつ効率的な運用を確保するために不可欠です。これらの潤滑剤は、ギアコンポーネントが経験する極端な圧力、温度、および荷重を処理するために特別に調合されています。これらの潤滑剤は、摩耗、腐食、熱劣化に対する優れた保護を提供し、ギアボックスの寿命と信頼性を高めます。
アジア太平洋地域は、航空旅行の増加、航空機保有台数の増加、航空宇宙製造部門の拡大により、予測期間中に最大の市場シェアを記録すると予想されます。中国、インド、日本、韓国などの国々が主要プレーヤーであり、航空インフラや軍事航空宇宙分野に多額の投資を行っています。厳しい規制基準と潤滑剤の技術進歩は、特に燃料効率が高く環境に優しいソリューションの市場成長をさらに促進します。
北米は、民間部門と防衛部門を含む航空機需要の高さに牽引され、予測期間中最も高いCAGRが見込まれます。米国は航空宇宙生産でリードしており、多数の航空機メーカーとMROプロバイダーが市場成長を後押ししています。航空機の安全性と性能を管理する厳しい規制が、特殊潤滑剤の需要をさらに押し上げています。低燃費で環境に優しい技術の採用が増加していることも、北米の市場動向を形成しています。
Note: Tables for North America, Europe, APAC, South America, and Middle East & Africa Regions are also represented in the same manner as above.
According to Stratistics MRC, the Global Aerospace Lubricants Market is accounted for $2.64 billion in 2024 and is expected to reach $3.79 billion by 2030 growing at a CAGR of 6.2% during the forecast period. Aerospace lubricants are specialized oils, greases, and other substances designed to reduce friction, wear, and heat generation in aircraft and spacecraft systems. These lubricants are formulated to meet the extreme conditions encountered in aviation and space exploration, including high altitudes, temperature variations, and pressure changes. They are used in a range of components, including engines, landing gear, and hydraulics, to enhance performance, longevity, and safety.
According to the International Air Transport Association IATA, the number of passengers traveling by air is expected to reach 4.7 billion in 2024, a jump from the 4.5 billion passengers who traveled in 2019.
Increasing air travel worldwide
As airlines operate more flights, the wear and tear on engines, gearboxes, and other critical components intensify, requiring high-quality lubricants to ensure optimal performance and longevity. Additionally, the development of newer, more fuel-efficient aircraft models creates a need for advanced lubricants capable of handling higher pressures and temperatures. This growing trend in air travel, along with the rising focus on aircraft safety and performance, propels demand for aerospace lubricants across various aviation sectors.
Complex formulation requirements
The complex formulation requirements in aerospace lubricants arise from the need to withstand extreme conditions such as high pressures, temperatures, and diverse operating environments. Formulations must balance anti-wear, corrosion resistance, lubrication, and thermal stability, which often require advanced additives and precise chemical combinations. This complexity increases production costs, time, and expertise needed for development. These factors can hamper market growth by limiting accessibility, raising costs, and slowing the adoption of new, efficient lubricant technologies.
Growing demand for sustainable solutions
Aviation companies and manufacturers seek to reduce their carbon footprint, leading to a shift towards lubricants made from biodegradable and renewable sources. These lubricants not only ensure efficient performance but also contribute to the sustainability goals of the industry. Additionally, advancements in eco-friendly additives and the push for compliance with environmental regulations further stimulate market growth. This trend aligns with global efforts to improve sustainability in aerospace, encouraging the use of lubricants that minimize environmental impact which thereby propels the market growth.
High cost of specialized lubricants
The high cost of specialized aerospace lubricants is primarily due to their advanced formulations, stringent quality standards, and the need for high-performance additives to withstand extreme temperatures and pressures. These lubricants are often manufactured using expensive raw materials and undergo rigorous testing for reliability and safety. This cost factor can hamper market growth, especially for smaller companies or budget-conscious operations, limiting the widespread adoption of these lubricants.
Covid-19 Impact
The covid-19 pandemic significantly impacted the aerospace lubricants market by reducing global air travel, leading to a decline in aircraft production and maintenance activities. With travel restrictions and lockdowns, demand for lubricants in commercial aviation dropped, affecting the overall market. However, the military and defense sectors saw less disruption. As the industry recovers, increasing air travel, fleet maintenance, and aircraft manufacturing are expected to drive market growth in the post-pandemic period, boosting lubricant demand.
The anti-wear segment is expected to be the largest during the forecast period
The anti-wear segment is predicted to secure the largest market share throughout the forecast period owing to its enhanced longevity and performance. These lubricants are formulated to reduce friction between moving parts, preventing wear and tear under high pressure and temperature conditions typical in aviation. They are designed to maintain optimal performance in engines, bearings, and other critical systems, ensuring smooth operation and preventing premature failure.
The gearbox lubricants segment is expected to have the highest CAGR during the forecast period
The gearbox lubricants segment is anticipated to witness the highest CAGR during the forecast period. Aerospace lubricants used in gearbox applications are essential for ensuring smooth and efficient operation of aircraft transmission systems. These lubricants are specially formulated to handle the extreme pressures, temperatures, and loads experienced by gear components. They provide superior protection against wear, corrosion, and thermal degradation, enhancing the longevity and reliability of the gearbox.
Asia Pacific is expected to register the largest market share during the forecast period fuelled by increasing air travel, rising aircraft fleet sizes, and expansion in the aerospace manufacturing sector. Countries like China, India, Japan, and South Korea are key players, investing heavily in aviation infrastructure and military aerospace. Stringent regulatory standards and technological advancements in lubricants further propel market growth, particularly for fuel-efficient and environmentally-friendly solutions.
North America is expected to witness the highest CAGR over the forecast period driven by the high demand for aircraft in the region, including both commercial and defense sectors. The U.S. leads in aerospace production, with numerous aircraft manufacturers and MRO providers fueling market growth. Stringent regulations governing aviation safety and performance further boost the demand for specialized lubricants. The increasing adoption of fuel-efficient and environmentally friendly technologies is also shaping market trends in North America.
Key players in the market
Some of the key players profiled in the Aerospace Lubricants Market include ExxonMobil Corporation, Shell Corporation, Chevron Corporation, BP p.l.c., TotalEnergies, Castrol, Dow Inc., The Lubrizol Corporation, Kluber Lubrication, Fuchs Petrolub AG, Phillips 66, Petro-Canada Lubricants, GKN Aerospace, SKF Group, Eastman Chemical Company, Moog Inc., Nye Lubricants, Inc., Aerospace Lubricants Inc., Innospec and Idemitsu Kosan Corporation.
In July 2024, Amsoil Inc., announced the acquisition of Aerospace Lubricants based in Columbus, Ohio, known for its expertise in high-performance lubricants for the aerospace industry. This strategic acquisition is expected to enhance AMSOIL's product portfolio, particularly in the area of grease formulation and production capabilities, which is vital for various aerospace applications.
In May 2018, Shell Lubricants introduced Shell LubeChat, an AI-powered chatbot designed to improve the customer experience in the B2B lubricants sector. This innovative tool is tailored to provide instant support, enhancing customer engagement by offering 24/7 assistance. The chatbot aims to streamline communication, enabling businesses to quickly access product information, technical support, and troubleshooting guidance.