![]() |
市場調査レポート
商品コード
1625195
空港用除雪装置市場の2030年までの予測:タイプ別、作動モード別、技術別、除雪技術別、用途別、エンドユーザー別、地域別の世界分析Airport Snow Removal Equipment Market Forecasts to 2030 - Global Analysis By Type, Mode of Operation, Technology, Snow Removal Technique, Application, End User and By Geography |
||||||
カスタマイズ可能
|
空港用除雪装置市場の2030年までの予測:タイプ別、作動モード別、技術別、除雪技術別、用途別、エンドユーザー別、地域別の世界分析 |
出版日: 2025年01月01日
発行: Stratistics Market Research Consulting
ページ情報: 英文 200+ Pages
納期: 2~3営業日
|
Stratistics MRCによると、世界の空港用除雪装置市場は2024年に44億2,000万米ドルを占め、予測期間中のCAGRは5.4%で2030年には60億6,000万米ドルに達する見込みです。
空港の除雪設備は、滑走路、誘導路、エプロン、航空機を含む空港の表面から雪や氷を除去するために使用される専用の機械を指します。この機器には、除雪車、ブロワー、スイーパー、除氷車、塩散布機などが含まれ、冬の天候時に安全で運用可能な状態を維持するように設計されています。これらの機械は、事故を防ぎ、降雪や凍結による混乱を最小限に抑えるために不可欠です。
空港の効率性と安全性への関心の高まり
空港用除雪装置の需要は、空港の安全性と効率性が重視されるようになったことが大きな要因となっています。世界中の空港にとって、スムーズで継続的な運営は最優先事項であり、特に積雪や凍結が危険な状況を作り出す冬場はなおさらです。効率的な除雪は、遅延を最小限に抑え、タイムリーな出発と到着を確保し、乗客、乗務員、地上スタッフの安全を維持するために極めて重要です。高性能の除雪機、ブロワー、除氷システムなどの高度な除雪設備は、滑走路、誘導路、エプロンの除雪に極めて重要な役割を果たすため、空港全体の効率を高め、冬の天候による事故のリスクを低減します。
高い初期投資とメンテナンス費用
空港用除雪装置市場では、多額の初期投資費用と継続的なメンテナンス費用が大きな課題となっています。特に小規模な空港や財政的に余裕のない空港では、大型除雪車、スイーパー、除氷システムなどの高度な除雪装置は、初期費用が高いため、経済的に大きな負担となる可能性があります。また、これらの機器は常にメンテナンスを必要とするため、運転コストも高くなります。最適な性能を維持するためには、定期的なメンテナンス、交換部品、修理が必要となり、総所有コストはさらに上昇します。こうした高額な出費は、空港によっては最新機器への投資を躊躇させ、特定の地域における市場の成長可能性を制限しています。
より迅速で効率的な除雪の必要性
空港は、特に旅行需要の高い時期において、冬期に関連する遅延や混乱を減らす必要に迫られています。滑走路、誘導路、エプロンの雪をできるだけ早く除去することで、フライトをより迅速に再開し、シームレスな運航を保証し、災難の可能性を下げることができます。安全性を損なうことなく、広範囲を迅速かつ効果的に除雪できる効率的な除雪装置が求められています。この需要に応えるため、空港では、自動化システム、大容量除雪機、除氷専用機などの技術革新により、冬の厳しい状況下でも業務効率を改善し、安全基準を維持することができます。
機器の短い寿命
厳しい冬の天候、継続的な使用、路面塩や除氷剤のような腐食性物質にさらされることにより、技術的な進歩にもかかわらず、多くの除雪装置が摩耗してしまいます。そのため、稼働寿命が比較的短く、数年の使用で高額な修理や交換を余儀なくされることも少なくありません。その結果、特に予算が厳しい空港では、機器の更新や点検を定期的に行う必要があるため、長期的な出費が増加し、運営に遅れが生じる可能性があります。その結果、空港は、初期投資と継続的な保守や交換の必要性とのバランスをとる必要があり、全体的なコスト効率に影響を及ぼします。
COVID-19の影響
COVID-19の流行は、空港用除雪装置市場にさまざまな影響を与えました。パンデミックの初期段階では、空港の交通量が減少し、除雪装置に対する需要が減少した一方で、安全を確保し、人的被害を減らすための効率的で自動化されたソリューションの必要性も浮き彫りになった。航空機の利用が徐々に再開されるにつれ、冬の天候下でも業務効率を維持することの重要性から、高度な除雪技術への投資が増加し、パンデミック後の市場成長を牽引しました。
予測期間中、スノーブロワー部門が最大となる見込み
スノーブロワー分野は、様々なエリアからの除雪効率が高いことから、最大市場であると推定されます。大量の降雪を処理し、雪を圧縮し、狭いスペースから雪を取り除く能力により、冬季の空港運営維持に欠かせないものとなっています。さらに、出力の向上、操縦性の改善、安全機能の強化といったスノーブロワー技術の進歩が、空港除雪市場での需要をさらに押し上げています。
予測期間中にCAGRが最も高くなると予想される航空機除氷分野
航空機の除氷分野は、予測期間中に最も高いCAGRが見込まれます。除氷装置は、翼、尾翼、胴体などの航空機表面から雪、氷、霜を除去するために使用され、飛行性能を損なう可能性のある氷の蓄積を防止します。このプロセスは、航空機が凍結した状況でも安全に離陸できるようにするために不可欠です。凍結防止液の散布には、加熱された凍結防止液を搭載した凍結防止トラックなどの特殊車両が使用され、凍結防止液の迅速かつ効果的な散布により、冬季の空港の円滑な運営を支えています。
特に中国、日本、韓国などの国々で航空旅行が急増しているため、空港における効率的な除雪ソリューションに対する需要が高まっており、予測期間中、アジア太平洋地域が最大の市場シェアを占めると予想されます。さらに、これらの地域では冬の嵐の頻度と激しさが増しているため、高度な除雪装置の採用が必要となっています。空港インフラへの政府の投資と、冬季の空港の安全性に関する厳しい規制が、この地域の市場成長をさらに促進しています。
予測期間中、北米地域は最も高いCAGRを記録すると予測されています。この地域は、特にカナダや米国北部のような国々で、豪雪を伴う厳しい冬の状況に見舞われるからです。空港の運営を円滑に行うには、効果的で信頼性の高い除雪装置が必要です。さらに、最先端の除雪技術のニーズは、冬季の空港の安全とセキュリティに関する厳格な法律が後押ししています。さらに、北米におけるこの市場の成長は、航空交通量の増加と空港インフラの開拓によって支えられています。
Note: Tables for North America, Europe, APAC, South America, and Middle East & Africa Regions are also represented in the same manner as above.
According to Stratistics MRC, the Global Airport Snow Removal Equipment Market is accounted for $4.42 billion in 2024 and is expected to reach $6.06 billion by 2030 growing at a CAGR of 5.4% during the forecast period. Airport snow removal equipment refers to specialized machinery used to clear snow and ice from airport surfaces, including runways, taxiways, aprons, and aircraft. This equipment includes snow plows, blowers, sweepers, de-icing vehicles, and salt spreaders, designed to maintain safe and operational conditions during winter weather. These machines are critical for preventing accidents and minimizing disruptions caused by snowfall and icy conditions.
Increasing focus on airport efficiency and safety
The demand for airport snow removal equipment is significantly driven by the growing emphasis on airport safety and efficiency. Smooth and continuous operations are a top priority for airports around the world, especially in the winter when snow and ice can create dangerous conditions. Efficient snow removal is crucial for minimizing delays, ensuring timely departures and arrivals, and maintaining the safety of passengers, crew, and ground staff. Advanced snow removal equipment, such as high-performance plows, blowers, and de-icing systems, plays a pivotal role in keeping runways, taxiways, and aprons clear, thus improving overall airport efficiency and reducing the risk of accidents caused by winter weather.
High initial investment and maintenance costs
The substantial upfront costs and ongoing maintenance expenses present a significant challenge in the airport snow removal equipment market. Airports, especially smaller or more financially limited ones, may find advanced snow removal equipment-like heavy-duty plows, sweepers, and de-icing systems-to be a major financial burden due to their high upfront costs. These devices also need constant maintenance, which raises operating costs. Maintaining optimal performance requires routine maintenance, replacement parts, and repairs, which raises the total cost of ownership even more. These high expenses can deter some airports from investing in the latest equipment, limiting the market's growth potential in certain regions.
Need for faster and more efficient snow removal
Airports are under growing pressure to reduce winter-related delays and disruptions, particularly during periods of high travel demand. By removing snow off runways, taxiways, and aprons as soon as possible, flights can resume more quickly, guaranteeing seamless operations and lowering the chance of mishaps. Efficient snow removal equipment that can clear large areas quickly and effectively without compromising safety is in high demand. To fulfill this demand, airports are able to improve operational efficiency and uphold safety standards even during difficult winter circumstances thanks to innovations like automated systems, high-capacity plows, and specialist de-icing machines.
Short lifespan of equipment
The harsh winter weather, continuous use, and exposure to corrosive substances like road salt and de-icing agents cause many snow removal devices to wear out despite technological breakthroughs. This leads to a comparatively short operating lifespan, which frequently necessitates expensive repairs or replacements after a few years of usage. This can result in increased long-term expenses and operational delays for airports, particularly those with tight budgets, as equipment needs to be updated or serviced more regularly. As a result, airports must balance the initial investment with the ongoing maintenance and replacement needs, affecting overall cost-efficiency.
Covid-19 Impact
The COVID-19 pandemic had a mixed impact on the airport snow removal equipment market. While airports experienced reduced traffic and lower demand for snow removal equipment during the early stages of the pandemic, it also highlighted the need for efficient, automated solutions to ensure safety and reduce human exposure. As air travel gradually resumed, the importance of maintaining operational efficiency in winter weather led to increased investment in advanced snow removal technologies, driving market growth post-pandemic.
The snow blowers segment is expected to be the largest during the forecast period
The snow blowers segment is estimated to be the largest, due to their efficiency in clearing snow from various areas. Their ability to handle heavy snowfall, compact snow, and clear snow from tight spaces makes them indispensable for maintaining airport operations during winter. Additionally, advancements in snow blower technology, such as increased power, improved maneuverability, and enhanced safety features, have further boosted their demand in the airport snow removal market.
The aircraft de-icing segment is expected to have the highest CAGR during the forecast period
The aircraft de-icing segment is anticipated to witness the highest CAGR during the forecast period. De-icing equipment is used to remove snow, ice, and frost from aircraft surfaces, including wings, tail, and fuselage, preventing ice build-up that could impair flight performance. This process is essential for ensuring that aircraft can take off safely in icy conditions. Specialized vehicles, including de-icing trucks with heated liquids, are employed to apply de-icing fluids, facilitating quick and effective removal to keep airports running smoothly during winter weather.
Asia Pacific is expected to have the largest market share during the forecast period due to rapid growth in air travel, particularly in countries like China, Japan, and South Korea, has led to increased demand for efficient snow removal solutions at airports. Additionally, the increasing frequency and intensity of winter storms in these regions have necessitated the adoption of advanced snow removal equipment. Government investments in airport infrastructure and stringent regulations regarding airport safety during winter conditions are further driving the market growth in the region.
During the forecast period, the North America region is anticipated to register the highest CAGR, owing to the region experiences harsh winter conditions with heavy snowfall, particularly in countries like Canada and the northern United States. For airport operations to run smoothly, effective and dependable snow removal equipment is required. Additionally, the need for cutting-edge snow removal technologies is driven by strict laws pertaining to airport safety and security during the winter. Furthermore, the growth of this market in North America is being aided by rising air traffic and the development of airport infrastructure.
Key players in the market
Some of the key players profiled in the Airport Snow Removal Equipment Market include Aebi Schmidt Group, Rosenbauer International AG, Daimler AG, Aero Specialties Inc., JBT Corporation, M-B Companies, Inc., Ziegler GmbH, The Toro Company, Turfco Manufacturing, Inc., Meyer Products LLC, Vestergaard Company A/S, Fayat Group, Bucher Industries AG, Nidex Limited, Manitowoc Company, Aviator Group, Montreal Snow Removal Equipment, Ravo GmbH, Kassbohrer Gelandefahrzeug AG, and Kuhn Group.
In September 2023, Aebi Schmidt introduced a new line of multifunctional snow removal vehicles designed to tackle multiple tasks, such as snow plowing, sweeping, and de-icing, all within a single machine. These vehicles are equipped with advanced features for improved fuel efficiency, ease of use, and operational flexibility, making them ideal for large airports with high snow removal demands.
In February 2023, Rosenbauer launched a new 6x6 snow removal vehicle designed for heavy-duty snow clearing operations at airports. The vehicle is equipped with a powerful engine, large snowplows, and a de-icing system, capable of handling extreme snow conditions and maintaining high operational efficiency.
In December 2022, The Toro Company unveiled an upgraded version of their snow clearing plow designed specifically for runways. The plow features improved blade technology and automated control systems that enhance precision and speed during snow removal operations.