デフォルト表紙
市場調査レポート
商品コード
1567946

中国の乗用車用携帯電話ワイヤレス充電市場(2024年)

China Passenger Car Mobile Phone Wireless Charging Research Report, 2024


出版日
ページ情報
英文 230 Pages
納期
即日から翌営業日
価格
価格表記: USDを日本円(税抜)に換算
本日の銀行送金レート: 1USD=144.03円
中国の乗用車用携帯電話ワイヤレス充電市場(2024年)
出版日: 2024年08月19日
発行: ResearchInChina
ページ情報: 英文 230 Pages
納期: 即日から翌営業日
GIIご利用のメリット
  • 全表示
  • 概要
  • 目次
概要

2024年6月、乗用車携帯電話ワイヤレス充電の標準搭載率は44%に達しました。

自動車用携帯電話ワイヤレス充電の利用シナリオはあるのか、携帯電話ワイヤレス充電モジュールを標準搭載する必要があるのか、といった議論が依然として多い中、OEMやサプライヤーは静かな反応を示しています。

2020年~2024年にかけて、自動車用携帯電話ワイヤレス充電モジュールの新車への標準搭載率は、2020年1月の6.9%から2024年6月に44.1%に上昇しました。

オプションモデルやワイヤレス充電モジュール後付けの携帯電話ホルダーを考慮すると、自動車用携帯電話ワイヤレス充電モジュールの実際の搭載率は50%を超えました。

2024年に1,000万セットを超え、2027年に1,800万セットを超えると推定されます。

搭載モデル別では、2024年に自動車用携帯電話ワイヤレス充電モジュールを搭載したモデルの上位3つは、Tesla Model Y、BYD Yuan Plus、AITO M7であり、いずれも標準搭載率は100%でした。携帯電話ワイヤレス充電モジュールの搭載率上位15モデルのうち、7モデルが標準搭載率100%を達成し、その他の8モデルの平均標準搭載率は70.5%でした。

乗用車用携帯電話ワイヤレス充電モジュールのサプライヤーは中国企業が主体で、Foryou Multimedia、InvisPower、Luxshare Precision、Zhejiang Temeなどがその代表です。従来のコンポーネントの分野では、NXPのマスターチップ、TIの電圧レギュレーターチップ、AOSのMOSチューブなど、国際的なサプライヤーのソリューションが依然として主に採用されていますが、ConvenientPower Semiconductor、NuVolta、Maxic、Southchipなど中国企業のソリューションも自動車用携帯電話ワイヤレス充電モジュールに採用されるケースがますます増えています。

2024年、80%以上の自動車用携帯電話ワイヤレス充電モジュールがQi 2.0認証を取得しています。

市場にはさまざまな価格とデザインのQi認証ワイヤレス充電製品があり、ユーザーの多様な要求を満たすのに十分です。しかし、OEMやTier1企業にとって、統一されたQi規格は、より理想的な自動車用無接点充電ソリューショ ンを生み出すことができます。Qi 2.0は、統一された携帯電話ワイヤレス充電プロトコルの機能、特にAppleのMagSafe磁気充電技術に基づくMPP(Magnetic Power Profile)の導入に取り組んでいます。磁界分布の最適化とソフトウェア補正により、MPPは充電効率を向上させ、ワイヤレス充電中の機器の安定性と信頼性を高めることができます。Qi 2.0のMPP技術は、ワイヤレス充電のユーザーエクスペリエンスを大幅に向上させました。

Qi 2.0の試験規格は2023年10月に発表され、2023年10月30日にソフト認証が開始され、2023年12月7日に認証が全面的に開始されました。2024年7月現在、78の自動車用無接点充電製品がQi認証に合格しています(2023年通年では54製品)。2024年に130~150の自動車用製品がQi認証を取得すると予測されます。

Qi 1.2.4はもっとも多くの自動車用製品を認証しているバージョンで、85%近くを占めていますが、2024年以降、サプライヤーは完全にQi 2.0に移行しています。

2024年にQi認証に合格した78製品のうち、63製品がQi 2.0認証を受けており、全体の80%超を占めています。

Qi 2.0は間違いなく、中・高出力のワイヤレス充電に対する消費者の需要を満たすために誕生しました。360kHzの周波数で動作し、Qi 1.3に基づいて55のデータパケットが追加されます。送電前の異物検知に対応し、さらに逆充電にも対応します。Qi 2.0の技術と規格は今後、より高出力の方向に向かうと思われます。2025年に25Wワイヤレス急速充電規格が、2026年に幅広い互換性と強力な適用性を持つ50Wワイヤレス急速充電規格が発表されると予測されています。

当レポートでは、中国の乗用車用携帯電話ワイヤレス充電市場について調査分析し、原理、規格、売上台数、標準搭載モデルのデータ、競合情勢、ベンダーの情報などを提供しています。

目次

第1章 自動車用携帯電話ワイヤレス充電の概要

  • 自動車用ワイヤレス充電機能の概要
    • 開発史
    • 原理:ワイヤレス充電技術の種類と特徴
    • 原理:ワイヤレス充電技術の種類と規格
    • 原理:電磁誘導技術
    • 構造(1):Visteonのワイヤレス充電モジュール
    • 構造(2):Teslaのワイヤレス充電モジュール
    • 主流のワイヤレス充電ソリューションは低消費電力と低放熱を特徴としている
    • 新技術の見通し:電波
    • 新技術の見通し:超音波/ライトフォーカス
  • 自動車用携帯電話ワイヤレス充電技術プロトコル
    • WPC
    • WPCの会員申請プロセス
    • WPCの会員認定料
    • WPCの製品認証規則
    • Qi規格:イントロダクション
    • Qi規格:申請と認証のプロセス
    • Qi規格:WPCの協力方式
    • プライベートプロトコルと関連認証
    • プライベートプロトコル機器:MegaSafe
    • 法律と規制、自動車認証
  • Qi 2.0
    • Qi 2.0の概要
    • Qi 2.0が携帯電話のワイヤレス充電規格を統一
    • Qi 2.0ロードマップ
    • 2024年にQi認証自動車用製品の80%がQi 2.0になる
    • 2023年に認証15W製品がすでに5W製品を上回る

第2章 自動車用携帯電話ワイヤレス充電市場

  • 市場データ
    • 市場データ:現状(2022年1月~2024年5月)
    • 市場データ:市場規模(2024年~2027年)
    • 市場データ:車両モデルにおけるワイヤレス充電モジュールの搭載数/搭載率:電源タイプ別(2020年~2024年)
    • 市場データ:車両モデルにおけるワイヤレス充電モジュールの搭載数/搭載率:価格帯別(2020年~2024年)
    • 市場データ:中国の乗用車モデル上位20:携帯電話ワイヤレス充電モジュールの搭載別(2021年~2024年)
    • 市場データ:BYDの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:Mercedes-Benz/BAICの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:GWMの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:Honda/Dongfengの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:Geelyの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:SAIC主力モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:Cheryの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:FAWの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:Changanの主要モデルの携帯電話ワイヤレス充電モジュール搭載率
    • 市場データ:新興OEMの携帯電話ワイヤレス充電モジュール搭載率
  • ワイヤレス充電の産業チェーン
    • サプライチェーンプロセス
    • ワイヤレス充電の産業チェーン
    • サプライヤーのソリューションの比較
    • ワイヤレス充電モジュールの主要コンポーネントの供給元
    • BYDのワイヤレス充電モジュール
    • Cheryのワイヤレス充電モジュール
    • Teslaのワイヤレス充電モジュール
    • GMのワイヤレス充電モジュール
    • Geelyのワイヤレス充電モジュール
    • BMWのワイヤレス充電モジュール
    • Great Wallのワイヤレス充電モジュール
    • ワイヤレス充電モジュールの市場価格
  • 競合情勢
    • 主要サプライヤーの市場シェア(2023年~2024年)
    • Foryou Multimedia:自動車用携帯電話ワイヤレス充電製品を供給する主要ブランドとその構造
    • InvisPower:自動車用携帯電話ワイヤレス充電製品を供給している主要ブランドとその構造
    • Luxshare Precisionとその他のサプライヤー:自動車用携帯電話ワイヤレス充電製品を供給している主要ブランドとその構造

第3章 自動車用携帯電話ワイヤレス充電ベンダー

  • コアコンポーネントベンダー
  • NXP
  • Renesas
  • Microchip
  • ROHM
  • MPS
  • ConvenientPower Semiconductor (CPS)
  • Southchip
  • NuVolta
  • Maxic
  • Sine Microelectronics
  • iSmartWare
  • モジュールベンダー
  • InvisPower
  • Foryou Multimedia
  • Shenzhen Sunway Communication
  • Luxshare Precision
  • Laird Novero
  • Continental
  • LG
  • Aptiv
  • Omron

第4章 OEMの自動車用携帯電話ワイヤレス充電の事例

  • OEM各社が独自に開発したワイヤレス充電技術
  • OEMモデルのワイヤレス充電機能の比較
  • Tesla
  • BMW
  • Geely
  • Volkswagen
  • AITO
  • Li Auto
  • NIO
  • BYD
  • IM
  • Great Wall Motor
目次
Product Code: ZXF009

China Passenger Car Mobile Phone Wireless Charging Research Report, 2024 highlights the following:

Passenger car wireless charging (principle, standards, and Qi2.0 protocol);

Passenger car mobile phone wireless charging module (sales volume and standard-configured vehicle model data, industry chain, and competitive landscape);

Product solutions of core components suppliers such as NXP, MPS, and Southchip; module solutions and composition of module suppliers such as Foryou Multimedia, InvisPower, and Laird Novero; automotive mobile phone wireless charging cases of OEMs such as Tesla, AITO, and BYD.

In June 2024, the standard installation rate of passenger car mobile phone wireless charging reached 44%.

When many people still discuss whether there are application scenarios for automotive mobile phone wireless charging and whether it is necessary to install mobile phone wireless charging modules as standard, OEMs and suppliers have made a quiet response.

Between 2020 and 2024, the standard installation rate of automotive mobile phone wireless charging modules in new cars increased from 6.9% in January 2020 to 44.1% in June 2024.

If optional models and post-installed mobile phone holders with wireless charging modules are considered, the actual installation rate of automotive mobile phone wireless charging modules exceeded 50%.

It is estimated that the installation is expected to exceed 10 million sets in 2024 and exceed 18 million sets in 2027.

In terms of installed models, Tesla Model Y, BYD Yuan Plus, and AITO M7 were the top three models with automotive mobile phone wireless charging modules in H1 2024, all with a standard configuration rate of 100%. Among the top 15 models by installation of mobile phone wireless charging modules, 7 models boasted the standard installation rate of 100%; the average standard configuration rate of the other 8 models was 70.5%.

Passenger car mobile phone wireless charging module suppliers are led by Chinese companies, and bellwethers include Foryou Multimedia, InvisPower, Luxshare Precision and Zhejiang Teme. In the field of traditional components, although solutions of international suppliers are still mainly adopted, such as NXP's master chip, TI's voltage regulator chip, and AOS' MOS tube, ever more solutions of Chinese companies such as ConvenientPower Semiconductor, NuVolta, Maxic and Southchip also find application in automotive mobile phone wireless charging modules.

In 2024, over 80% of automotive mobile phone wireless charging modules have obtained Qi 2.0 certification

There are Qi-certified wireless charging products of varying prices and designs on the market, enough to meet diverse requirements of users. But for OEMs and Tier1s, a unified Qi standard can create more ideal automotive wireless charging solutions. Qi 2.0 undertakes the functions of a unified mobile phone wireless charging protocol, especially the introduction of MPP (Magnetic Power Profile) based on Apple's MagSafe magnetic charging technology. By optimizing magnetic field distribution and software correction, MPP can improve charging efficiency, making devices more stable and reliable during wireless charging. Qi2.0's MPP technology has greatly improved user experience of wireless charging.

The test standard of Qi2.0 was released in October 2023, and the soft certification started on October 30, 2023, and the certification was fully opened on December 7, 2023. As of July 2024, 78 automotive wireless charging products have passed Qi certification, compared with 54 in the full year of 2023. It is expected that 130-150 automotive products will be Qi-certified in 2024.

Qi 1.2.4 is the version certifying the most automotive products, sweeping nearly 85%, but since 2024, suppliers have fully turned to Qi 2.0.

Of the 78 products that passed Qi certification in 2024, 63 are Qi 2.0 certified, or more than 80% of the total.

Undoubtedly Qi 2.0 is born to meet consumers' demand for medium- and high-power wireless charging. It operates at a frequency of 360kHz and adds 55 data packets based on Qi 1.3. It can support foreign object detection before power transmission, and also additionally supports reverse charging. Qi 2.0 technology and standards will head in the direction of higher power in the future. It is expected that a 25W wireless fast charging standard will be launched in 2025, and a 50W wireless fast charging standard with wide compatibility and strong applicability will be launched in 2026.

Seen from current products on the market, the 15W Qi 2.0 has fallen behind 50W private protocols. As the demand for charging mobile phones in the cockpit increases, higher-power charging solutions are needed. For example, Luxeed M7 supports charging 9 devices simultaneously, including 2 50W private protocol wireless fast charging and 2 66W wired super charging devices. The Qi 2.x fast charging protocol needs to be accelerated.

Precision, efficiency, and heat dissipation: Solutions to three major enduring problems in automotive mobile phone wireless charging

Problem 1: Precision: use magnetic attraction to ensure device alignment

Wireless charging relies on electromagnetic coils. In the charger, one or more induction coils create a magnetic field and transfer energy, and smaller coils in mobile phone or other devices collect the energy. The coils must be aligned to transfer energy between them.

The biggest upgrade of Qi 2.0 is adding the same magnetic function as Apple MagSafe. As the chairman member of WPC, Apple has contributed its MagSafe technology to WPC, which has over 370 members. The magnetic solution of Qi 2.0 guarantees perfect alignment, thereby reducing energy loss and ensuring charging efficiency.

The automotive mobile phone wireless charging module is mainly installed in central storage box or armrest box. Its position is fixed according to the space shape. The pattern and material increase its friction and can also improve localization accuracy of devices. However considering that devices may shift when the vehicle encounters complex road conditions such as bumps and turns during driving, magnetic attraction can better improve device stability. If bracket-type wireless charging devices in the aftermarket are taken into account, the role of magnetic attraction becomes even more important.

Problem 2: Efficiency: private protocols and new policies accelerate the launch of fast charging devices

The Qi standard initially featured charging power of 5W, which was later increased to 7.5W and 10W, while Qi 2.0 increases charging power to 15W. During 2025-2026, 25W and 50W versions with faster charging efficiency are scheduled to be released.

Yet currently many vehicle models already offer 50W wireless charging mainly through private protocols. For example, private protocols of Android phones such as Huawei, Xiaomi, and OPPO can enable automotive wireless charging power to reach 40-50W. For Apple phones, these models can only provide 15W charging solutions that support the MagSafe protocol.

In 2021, AITO M5 increased the power of automotive wireless charging to 40W for the first time. At that time, the Qi protocol could no longer meet this standard, so private protocols were also adopted for automotive wireless charging. New models in 2024, such as IM L6, Lynk & Co 07, New AITO M5, Xiaomi SU7, Zeekr 001, Luxeed S7 and Li L6, have generally supported 50W mobile phone wireless charging, but private protocols of each company are also easy to connect. At present, most 50W automotive wireless charging private protocol solutions can already support mainstream Android mobile phone brands.

The Interim Provisions on Administration of Radio of Wireless Charging (Power Transmission) Devices" the Ministry of Industry and Information Technology will begin to implement on September 1, 2024, indicates that mobile and portable wireless charging devices shall operate in the frequency ranges of 100-148.5kHz, 6765-6795kHz, and 13553-13567kHz, and the rated transmission power shall not exceed 80W. Earlier in February 2021, the Interim Provisions on Administration of Radio of Wireless Charging (Power Transmission) Devices (Draft for Comments) drafted by the Radio Administration Bureau of the Ministry of Industry and Information Technology emphasized that the rated transmission power of wireless charging shall not exceed 50W, which is why the maximum power of current wireless charging products does not exceed 50W, in spite of relevant suppliers pushing up the technology to more than 100W. Perhaps after September 2024, 80W private protocol wireless charging products will be available on market soon.

Problem 3: Heat dissipation: it is a long-lasting problem, and physical cooling is still the mainstream strategy

Most automotive mobile phone wireless charging solutions use a full-bridge SOC solution with built-in MCU and built-in power tube. This solution will easily cause heating problems.

Thermally conductive silicone sheets, thermally conductive gels, heat dissipation holes, and air cooling devices are currently major heat dissipation strategies for automotive wireless charging modules. The wireless charging compartment of AITO series is set in the concave space of the center console (one/both sides), with heat dissipation holes to actively cool the mobile phone and wireless charging module. The wireless charging board (50W) for Li Auto's 2024 models has more metal materials inside and uses an electric cooling fan for better heat dissipation.

Some suppliers are also trying to use new materials to deal with heat dissipation. Zhongke B Plus's research shows that in the same wireless charging working conditions, the temperature rise of nanocrystals is 7~8°C lower than that of ferrites. Of course, the nanocrystalline material is also a major wave-absorbing material. As a major supplier of nanocrystalline materials in China, Yunlu AMT provides nanocrystalline materials for the receiving terminals of some wireless charging products of Apple, Xiaomi and Huawei.

Table of Contents

1 Overview of Automotive Mobile Phone Wireless Charging

  • 1.1 Overview of Automotive Wireless Charging Function
    • 1.1.1 Development History
    • 1.1.2 Principle: Types and Features of Wireless Charging Technology
    • 1.1.2 Principle: Types and Standards of Wireless Charging Technology
    • 1.1.2 Principle: Electromagnetic Induction Technology
    • 1.1.3 Structure (1): Visteon's Wireless Charging Module
    • 1.1.3 Structure (2): Tesla's Wireless Charging Module
    • 1.1.4 Mainstream Wireless Charging Solutions Feature Low Power and Slow Heat Dissipation
    • 1.1.5 New Technology Outlook: Radio Wave
    • 1.1.5 New Technology Outlook: Ultrasonic/Light Focus
  • 1.2 Automotive Mobile Phone Wireless Charging Technology Protocols
    • 1.2.1 WPC
    • 1.2.2 Membership Application Process of WPC
    • 1.2.3 Member Certification Fee of WPC
    • 1.2.4 Product Certification Rule of WPC
    • 1.2.5 Qi Standard: Introduction
    • 1.2.6 Qi Standard: Application and Certification Process
    • 1.2.7 Qi Standard: Cooperation Modes of WPC
    • 1.2.8 Private Protocol and Related Certification
    • 1.2.9 Private Protocol Equipment: MegaSafe
    • 1.2.10 Laws & Regulations and Automotive Certification
  • 1.3 Qi 2.0
    • 1.3.1 Overview of Qi 2.0
    • 1.3.2 Qi2.0 Unifies Mobile Phone Wireless Charging Standards
    • 1.3.3 Qi2.0 Roadmap
    • 1.3.4 80% of Qi-certified Automotive Products to be Qi 2.0 in 2024
    • 1.3.5 Certified-15W Products Already Outnumber 5W Products Starting in 2023

2 Automotive Mobile Phone Wireless Charging Market

  • 2.1 Market Data
    • 2.1.1 Market Data: Status Quo, Jan. 2022- May 2024
    • 2.1.1 Market Data: Market Size, 2024-2027E
    • 2.1.2 Market Data: Installations/Installation Rate of Wireless Charging Modules in Vehicle Models by Power Type, 2020-2024
    • 2.1.3 Market Data: Installations/Installation Rate of Wireless Charging Modules in Vehicle Models by Price Range, 2020-2024
    • 2.1.4 Market Data: TOP20 Passenger Car Models by Installation of Mobile Phone Wireless Charging Modules in China, 2021-2024
    • 2.1.5 Market Data: Mobile Phone Wireless Charging Module Installation Rate of BYD's Main Models
    • 2.1.6 Market Data: Mobile Phone Wireless Charging Module Installation Rate of Mercedes-Benz/BAIC's Main Models
    • 2.1.7 Market Data: Mobile Phone Wireless Charging Module Installation Rate of GWM's Main Models
    • 2.1.8 Market Data: Mobile Phone Wireless Charging Module Installation Rate of Honda/Dongfeng's Main Models
    • 2.1.9 Market Data: Mobile Phone Wireless Charging Module Installation Rate of Geely's Main Models
    • 2.1.10 Market Data: Mobile Phone Wireless Charging Module Installation Rate of SAIC's Main Models
    • 2.1.11 Market Data: Mobile Phone Wireless Charging Module Installation Rate of Chery's Main Models
    • 2.1.12 Market Data: Mobile Phone Wireless Charging Module Installation Rate of FAW's Main Models
    • 2.1.13 Market Data: Mobile Phone Wireless Charging Module Installation Rate of Changan's Main Models
    • 2.1.14 Market Data: Mobile Phone Wireless Charging Module Installation Rate of Emerging OEMs
  • 2.2 Wireless Charging Industry Chain
    • 2.2.1 Supply Chain Process
    • 2.2.2 Wireless Charging Industry Chain
    • 2.2.3 Comparison between Suppliers' Solutions
    • 2.2.3 Sources of Main Components of Wireless Charging Modules
    • 2.2.4 BYD's Wireless Charging Module
    • 2.2.5 Chery's Wireless Charging Module
    • 2.2.6 Tesla's Wireless Charging Module
    • 2.2.7 GM's Wireless Charging Module
    • 2.2.8 Geely's Wireless Charging Module
    • 2.2.9 BMW's Wireless Charging Module
    • 2.2.10 Great Wall's Wireless Charging Module
    • 2.2.11 Market Prices of Wireless Charging Modules
  • 2.3 Competitive Landscape
    • 2.3.1 Market Share of Major Suppliers, 2023-2024
    • 2.3.2 Foryou Multimedia: Major Brands Supplied with Automotive Mobile Phone Wireless Charging Products and Their Structure
    • 2.3.3 InvisPower: Major Brands Supplied with Automotive Mobile Phone Wireless Charging Products and Their Structure
    • 2.3.4 Luxshare Precision and Other Suppliers: Major Brands Supplied with Automotive Mobile Phone Wireless Charging Products and Their Structure

3 Automotive Mobile Phone Wireless Charging Vendors

  • Core Component Vendors
  • 3.1 NXP
    • 3.1.1 Profile
    • 3.1.2 Wireless Charging Solutions (1)
    • 3.1.2 Wireless Charging Solutions (2)
    • 3.1.2 Wireless Charging Solutions (3)
    • 3.1.2 Wireless Charging Solutions (4)
    • 3.1.3 Wireless Charging Solutions with NFC
    • 3.1.4 WCT-15W AUTO13
    • 3.1.5 WCT-15W TXAUTOS
    • 3.1.6 RDWCT-15W TXAUTO
    • 3.1.7 RDWCT-5W TXAUTO
    • 3.1.8 BPP-type 13A Solution Planning
    • 3.1.9 Main Master MCU Models
    • 3.1.10 MWCT1213A
    • 3.1.11 WCT-1013A
    • 3.1.12 MWCT2xxxS Wireless Charging Chips
    • 3.1.13 Software Architecture
    • 3.1.14 Automotive-grade Fast Charging Development Platform
  • 3.2 Renesas
    • 3.2.1 Profile
    • 3.2.2 Wireless Charging Solution Architecture
    • 3.2.3 Wireless Charging Solutions
    • 3.2.4 Buck Chip ISL8117
    • 3.2.5 MCU R5F10PLHLFB
  • 3.3 Microchip
    • 3.3.1 Profile
    • 3.3.2 MCHPQi1p3TX
    • 3.3.3 Qi 2.0-based dsPIC33
  • 3.4 ROHM
    • 3.4.1 BD57121MUF-M
  • 3.5 MPS
    • 3.5.1 Automotive Mobile Phone Wireless Charging Solution
    • 3.5.2 Automotive Mobile Phone Wireless Charging Framework
    • 3.5.3 Features of Automotive Mobile Phone Wireless Charging MPQ4280 Module
    • 3.5.4 Features of Automotive Mobile Phone Wireless Charging MPQ4262 Module
  • 3.6 ConvenientPower Semiconductor (CPS)
    • 3.6.1 Profile
    • 3.6.2 Qi-certified Products
    • 3.6.3 Structure of CPSQ8100
    • 3.6.4 CPSQ8203
    • 3.6.5 CPSQ-OMX14XW
  • 3.7 Southchip
    • 3.7.1 Profile
    • 3.7.2 Partners
    • 3.7.3 Wireless Charging Solutions
    • 3.7.4 Chip Features
    • 3.7.5 SC9621
    • 3.7.6 15W/50W Charging Solutions
    • 3.7.7 MPP Wireless Charging Module
    • 3.7.8 SC9610 50W TX Controller
    • 3.7.9 SC5008 15W TX Power Stage
  • 3.8 NuVolta
    • 3.8.1 Profile
    • 3.8.2 Qi-certified Products
    • 3.8.3 NU8040Q
    • 3.8.3 NVTREF8040Q
    • 3.8.4 NU1705/8A for MPP
  • 3.9 Maxic
    • 3.9.1 Profile
    • 3.9.2 Chip Types
    • 3.9.3 MTQ5807
    • 3.9.4 MT5815
    • 3.9.5 MT5760
    • 3.9.6 MT5788
  • 3.10 Sine Microelectronics
    • 3.10.1 Profile
    • 3.10.2 Wireless Charging Solutions
    • 3.10.3 The Second-generation Automotive Wireless Charging Solution
  • 3.11 iSmartWare
    • 3.11.1 Profile
    • 3.11.2 Wireless Charging Series: SW5001
    • 3.11.3 Wireless Charging Series: SW5001 Derivative Series
    • 3.11.4 SW5001 Wireless Charging TX SoC Solution
  • Module Vendors
  • 3.12 InvisPower
    • 3.12.1 Profile
    • 3.12.2 Wireless Charging Products
    • 3.12.3 BYD's Wireless Charging Module
  • 3.13 Foryou Multimedia
    • 3.13.1 Profile
    • 3.13.2 Development History of Wireless Charging Products
    • 3.13.3 Features and Planning of Wireless Charging Products
    • 3.13.4 50W Wireless Charging Modules
    • 3.13.5 High-power Tracking Wireless Charging Modules
    • 3.13.6 Qi-certified Products
    • 3.13.7 Chery's Wireless Charging Cases
  • 3.14 Shenzhen Sunway Communication
    • 3.14.1 Profile
    • 3.14.2 Automotive Wireless Charging Transmitter Modules
  • 3.15 Luxshare Precision
    • 3.15.1 Profile
    • 3.15.2 Wireless Charging Modules
  • 3.16 Laird Novero
    • 3.16.1 Profile
    • 3.16.2 Business Layout
    • 3.16.3 Qi-certified Products
    • 3.16.4 WCH-186
    • 3.16.5 WCH-209 of Mazda 3
  • 3.17 Continental
    • 3.17.1 Integration with Multifunctional Smart Phones
    • 3.17.2 Qi-certified Products
  • 3.18 LG
    • 3.18.1 Profile
    • 3.18.2 WC500M
  • 3.19 Aptiv
    • 3.19.1 Profile
    • 3.19.2 Wireless Charging Module Structure
    • 3.19.3 Wireless Charging Solutions
  • 3.20 Omron
    • 3.20.1 Profile
    • 3.20.2 Second Resonance Technology

4 Automotive Mobile Phone Wireless Charging Cases of OEMs

  • 4.1 Wireless Charging Technology Developed by OEMs Independently
  • 4.2 Comparison between Wireless Charging Functions of OEM Models
  • 4.3 Tesla
    • 4.3.1 Model Y: Self-designed Wireless Charging Modules
  • 4.4 BMW
    • 4.4.1 Wireless Charging Suppliers of BMW 5 Series
  • 4.5 Geely
    • 4.5.1 Wireless Charging Suppliers
    • 4.5.2 Internal Structure of Lynk & Co/ZEEKR Wireless Charger
  • 4.6 Volkswagen
    • 4.6.1 Wireless Charging Suppliers
    • 4.6.2 Wireless Charging Suppliers of Magotan P8/ Tiguan L
  • 4.7 AITO
    • 4.7.1 Wireless Charging Suppliers
  • 4.8 Li Auto
    • 4.8.1 Supplier for Wireless Charging Boards of Li L Series
    • 4.8.2 Wireless Charging Boards of Li ONE Series: NXP's Chips
  • 4.9 NIO
    • 4.9.1 Cool Air Wireless Charging Modules
  • 4.10 BYD
    • 4.10.1 Samsung Private Protocol Supported
  • 4.11 IM
    • 4.11.1 Liftable/Grooved Wireless Charging Boards
  • 4.12 Great Wall Motor
    • 4.12.1 Wireless Charging Suppliers of Haval Cool Dog