Product Code: 12793
The medical X-ray film processor market will reach USD 1,238.5 million revenue by 2030, progressing at a rate of 3.2% by the end of this decade, rising considerably from USD 998.7 million in 2023. This is because of the increasing occurrence of cancer, orthopedic diseases, dental issues, and cardiac ailments, accompanied by the growing count of X-ray imaging procedures, mounting consciousness of early diagnosis, and growing healthcare spending.
The fully automatic film processor led the industry with a share of 60%, in 2023, as a result of the high image eminence of these variants. Furthermore, as they need less processing time than the manual ones, additional films can be handled in a given period.
Also, the automated variant decreases the inconsistency in the film quality improved compared to manually processed films, since the solution temperature, processing time, and chemical replenishment are regulated automatically.
The orthopedic category had the largest medical X-ray film processor market share, on the basis of application. This is because of the widespread use of X-rays in numerous orthopedic practices to identify and monitor joint and bone conditions, for example dislocation, fractures, and arthritis. X-ray film processors are put to use for developing X-ray films required to produce diagnostic images, which aid healthcare specialists sense the condition and treat the patient consequently.
Therefore, the growing count of orthopedic cases will power the growth of the industry. For example, in the U.S., about 7 million orthopedic surgeries were done in 2021, which reflects a considerable volume of X-ray scans for diagnosis.
Stalwarts of the market have grown over the past by adding novel products to their portfolios and snowballing the occurrence of attainments and partnerships. In addition, these strategic associations and product introductions bring about a competitive edge.
For example, in March 2021, Fujifilm Corporation publicized that it has entered an arrangement with Hitachi Ltd. to obtain Hitachi's diagnostic imaging business, so as to increase its healthcare business.
With the surge in the occurrence of chronic ailments and the increase in the elderly populace, the requirement for X-ray imaging procedures has increased in North America. Also, the industry is powered by the incidence of more than a few key players, obtainability of tech advanced products, and increasing consciousness of the early analysis of ailments. Furthermore, in the U.S., the count of hospitals is growing, with about 8,000 of these functioning as of 2023.
It is because of the rising incidence of cancer all over thew world, and increasing awareness of early diagnosis, the demand for medical X-ray film processor is on the rise. This trend will continue in the years to come as well.
Key Players in Medical X-Ray Film Processor Market Are:
Konica Minolta Inc.
PROTEC GmbH & Co. KG
Dentsply Sirona
Zimed Healthcare Inc.
Carestream Health
FUJIFILM Holdings Corporation
Z&Z Medical Inc.
Agfa-Gevaert N.V.
ARI Medical Technology Gro8up Co. Ltd.
Table of Contents
Chapter 1. Research Scope
- 1.1. Research Objectives
- 1.2. Market Definition
- 1.3. Analysis Period
- 1.4. Market Size Breakdown by Segments
- 1.4.1. Market size breakdown, by type
- 1.4.2. Market size breakdown, by application
- 1.4.3. Market size breakdown, by end user
- 1.4.4. Market size breakdown, by region
- 1.4.5. Market size breakdown, by country
- 1.5. Market Data Reporting Unit
- 1.5.1. Volume
- 1.5.2. Value
- 1.6. Key Stakeholders
Chapter 2. Research Methodology
- 2.1. Secondary Research
- 2.1.1. Paid
- 2.1.2. Unpaid
- 2.1.3. P&S Intelligence database
- 2.2. Primary Research
- 2.3. Market Size Estimation
- 2.4. Data Triangulation
- 2.5. Currency Conversion Rates
- 2.6. Assumptions for the Study
- 2.7. Notes and Caveats
Chapter 3. Executive Summary
Chapter 4. Market Indicators
Chapter 5. Industry Outlook
- 5.1. Market Dynamics
- 5.1.1. Trends
- 5.1.2. Drivers
- 5.1.3. Restraints/challenges
- 5.1.4. Impact analysis of drivers/restraints
- 5.2. Impact of COVID-19
- 5.3. Porter's Five Forces Analysis
- 5.3.1. Bargaining power of buyers
- 5.3.2. Bargaining power of suppliers
- 5.3.3. Threat of new entrants
- 5.3.4. Intensity of rivalry
- 5.3.5. Threat of substitutes
Chapter 6. Global Market
- 6.1. Overview
- 6.2. Market Volume, by Type (2017-2030)
- 6.3. Market Revenue, by Type (2017-2030)
- 6.4. Market Volume, by Application (2017-2030)
- 6.5. Market Revenue, by Application (2017-2030)
- 6.6. Market Volume, by End User (2017-2030)
- 6.7. Market Revenue, by End User (2017-2030)
- 6.8. Market Volume, by Region (2017-2030)
- 6.9. Market Revenue, by Region (2017-2030)
Chapter 7. North America Market
- 7.1. Overview
- 7.2. Market Volume, by Type (2017-2030)
- 7.3. Market Revenue, by Type (2017-2030)
- 7.4. Market Volume, by Application (2017-2030)
- 7.5. Market Revenue, by Application (2017-2030)
- 7.6. Market Volume, by End User (2017-2030)
- 7.7. Market Revenue, by End User (2017-2030)
- 7.8. Market Volume, by Country (2017-2030)
- 7.9. Market Revenue, by Country (2017-2030)
Chapter 8. Europe Market
- 8.1. Overview
- 8.2. Market Volume, by Type (2017-2030)
- 8.3. Market Revenue, by Type (2017-2030)
- 8.4. Market Volume, by Application (2017-2030)
- 8.5. Market Revenue, by Application (2017-2030)
- 8.6. Market Volume, by End User (2017-2030)
- 8.7. Market Revenue, by End User (2017-2030)
- 8.8. Market Volume, by Country (2017-2030)
- 8.9. Market Revenue, by Country (2017-2030)
Chapter 9. APAC Market
- 9.1. Overview
- 9.2. Market Volume, by Type (2017-2030)
- 9.3. Market Revenue, by Type (2017-2030)
- 9.4. Market Volume, by Application (2017-2030)
- 9.5. Market Revenue, by Application (2017-2030)
- 9.6. Market Volume, by End User (2017-2030)
- 9.7. Market Revenue, by End User (2017-2030)
- 9.8. Market Volume, by Country (2017-2030)
- 9.9. Market Revenue, by Country (2017-2030)
Chapter 10. LATAM Market
- 10.1. Overview
- 10.2. Market Volume, by Type (2017-2030)
- 10.3. Market Revenue, by Type (2017-2030)
- 10.4. Market Volume, by Application (2017-2030)
- 10.5. Market Revenue, by Application (2017-2030)
- 10.6. Market Volume, by End User (2017-2030)
- 10.7. Market Revenue, by End User (2017-2030)
- 10.8. Market Volume, by Country (2017-2030)
- 10.9. Market Revenue, by Country (2017-2030)
Chapter 11. MEA Market
- 11.1. Overview
- 11.2. Market Volume, by Type (2017-2030)
- 11.3. Market Revenue, by Type (2017-2030)
- 11.4. Market Volume, by Application (2017-2030)
- 11.5. Market Revenue, by Application (2017-2030)
- 11.6. Market Volume, by End User (2017-2030)
- 11.7. Market Revenue, by End User (2017-2030)
- 11.8. Market Volume, by Country (2017-2030)
- 11.9. Market Revenue, by Country (2017-2030)
Chapter 12. U.S. Market
- 12.1. Overview
- 12.2. Market Volume, by Type (2017-2030)
- 12.3. Market Revenue, by Type (2017-2030)
- 12.4. Market Volume, by Application (2017-2030)
- 12.5. Market Revenue, by Application (2017-2030)
- 12.6. Market Volume, by End User (2017-2030)
- 12.7. Market Revenue, by End User (2017-2030)
Chapter 13. Canada Market
- 13.1. Overview
- 13.2. Market Volume, by Type (2017-2030)
- 13.3. Market Revenue, by Type (2017-2030)
- 13.4. Market Volume, by Application (2017-2030)
- 13.5. Market Revenue, by Application (2017-2030)
- 13.6. Market Volume, by End User (2017-2030)
- 13.7. Market Revenue, by End User (2017-2030)
Chapter 14. Germany Market
- 14.1. Overview
- 14.2. Market Volume, by Type (2017-2030)
- 14.3. Market Revenue, by Type (2017-2030)
- 14.4. Market Volume, by Application (2017-2030)
- 14.5. Market Revenue, by Application (2017-2030)
- 14.6. Market Volume, by End User (2017-2030)
- 14.7. Market Revenue, by End User (2017-2030)
Chapter 15. France Market
- 15.1. Overview
- 15.2. Market Volume, by Type (2017-2030)
- 15.3. Market Revenue, by Type (2017-2030)
- 15.4. Market Volume, by Application (2017-2030)
- 15.5. Market Revenue, by Application (2017-2030)
- 15.6. Market Volume, by End User (2017-2030)
- 15.7. Market Revenue, by End User (2017-2030)
Chapter 16. U.K. Market
- 16.1. Overview
- 16.2. Market Volume, by Type (2017-2030)
- 16.3. Market Revenue, by Type (2017-2030)
- 16.4. Market Volume, by Application (2017-2030)
- 16.5. Market Revenue, by Application (2017-2030)
- 16.6. Market Volume, by End User (2017-2030)
- 16.7. Market Revenue, by End User (2017-2030)
Chapter 17. Italy Market
- 17.1. Overview
- 17.2. Market Volume, by Type (2017-2030)
- 17.3. Market Revenue, by Type (2017-2030)
- 17.4. Market Volume, by Application (2017-2030)
- 17.5. Market Revenue, by Application (2017-2030)
- 17.6. Market Volume, by End User (2017-2030)
- 17.7. Market Revenue, by End User (2017-2030)
Chapter 18. Spain Market
- 18.1. Overview
- 18.2. Market Volume, by Type (2017-2030)
- 18.3. Market Revenue, by Type (2017-2030)
- 18.4. Market Volume, by Application (2017-2030)
- 18.5. Market Revenue, by Application (2017-2030)
- 18.6. Market Volume, by End User (2017-2030)
- 18.7. Market Revenue, by End User (2017-2030)
Chapter 19. Japan Market
- 19.1. Overview
- 19.2. Market Volume, by Type (2017-2030)
- 19.3. Market Revenue, by Type (2017-2030)
- 19.4. Market Volume, by Application (2017-2030)
- 19.5. Market Revenue, by Application (2017-2030)
- 19.6. Market Volume, by End User (2017-2030)
- 19.7. Market Revenue, by End User (2017-2030)
Chapter 20. China Market
- 20.1. Overview
- 20.2. Market Volume, by Type (2017-2030)
- 20.3. Market Revenue, by Type (2017-2030)
- 20.4. Market Volume, by Application (2017-2030)
- 20.5. Market Revenue, by Application (2017-2030)
- 20.6. Market Volume, by End User (2017-2030)
- 20.7. Market Revenue, by End User (2017-2030)
Chapter 21. India Market
- 21.1. Overview
- 21.2. Market Volume, by Type (2017-2030)
- 21.3. Market Revenue, by Type (2017-2030)
- 21.4. Market Volume, by Application (2017-2030)
- 21.5. Market Revenue, by Application (2017-2030)
- 21.6. Market Volume, by End User (2017-2030)
- 21.7. Market Revenue, by End User (2017-2030)
Chapter 22. Australia Market
- 22.1. Overview
- 22.2. Market Volume, by Type (2017-2030)
- 22.3. Market Revenue, by Type (2017-2030)
- 22.4. Market Volume, by Application (2017-2030)
- 22.5. Market Revenue, by Application (2017-2030)
- 22.6. Market Volume, by End User (2017-2030)
- 22.7. Market Revenue, by End User (2017-2030)
Chapter 23. South Korea Market
- 23.1. Overview
- 23.2. Market Volume, by Type (2017-2030)
- 23.3. Market Revenue, by Type (2017-2030)
- 23.4. Market Volume, by Application (2017-2030)
- 23.5. Market Revenue, by Application (2017-2030)
- 23.6. Market Volume, by End User (2017-2030)
- 23.7. Market Revenue, by End User (2017-2030)
Chapter 24. Brazil Market
- 24.1. Overview
- 24.2. Market Volume, by Type (2017-2030)
- 24.3. Market Revenue, by Type (2017-2030)
- 24.4. Market Volume, by Application (2017-2030)
- 24.5. Market Revenue, by Application (2017-2030)
- 24.6. Market Volume, by End User (2017-2030)
- 24.7. Market Revenue, by End User (2017-2030)
Chapter 25. Mexico Market
- 25.1. Overview
- 25.2. Market Volume, by Type (2017-2030)
- 25.3. Market Revenue, by Type (2017-2030)
- 25.4. Market Volume, by Application (2017-2030)
- 25.5. Market Revenue, by Application (2017-2030)
- 25.6. Market Volume, by End User (2017-2030)
- 25.7. Market Revenue, by End User (2017-2030)
Chapter 26. Saudi Arabia Market
- 26.1. Overview
- 26.2. Market Volume, by Type (2017-2030)
- 26.3. Market Revenue, by Type (2017-2030)
- 26.4. Market Volume, by Application (2017-2030)
- 26.5. Market Revenue, by Application (2017-2030)
- 26.6. Market Volume, by End User (2017-2030)
- 26.7. Market Revenue, by End User (2017-2030)
Chapter 27. South Africa Market
- 27.1. Overview
- 27.2. Market Volume, by Type (2017-2030)
- 27.3. Market Revenue, by Type (2017-2030)
- 27.4. Market Volume, by Application (2017-2030)
- 27.5. Market Revenue, by Application (2017-2030)
- 27.6. Market Volume, by End User (2017-2030)
- 27.7. Market Revenue, by End User (2017-2030)
Chapter 28. U.A.E. Market
- 28.1. Overview
- 28.2. Market Volume, by Type (2017-2030)
- 28.3. Market Revenue, by Type (2017-2030)
- 28.4. Market Volume, by Application (2017-2030)
- 28.5. Market Revenue, by Application (2017-2030)
- 28.6. Market Volume, by End User (2017-2030)
- 28.7. Market Revenue, by End User (2017-2030)
Chapter 29. Competitive Landscape
- 29.1. List of Market Players and their Offerings
- 29.2. Competitive Benchmarking of Key Players
- 29.3. Product Benchmarking of Key Players
- 29.4. Recent Strategic Developments
Chapter 30. Company Profiles
- 30.1. Konica Minolta Inc.
- 30.1.1. Business overview
- 30.1.2. Product and service offerings
- 30.1.3. Key financial summary
- 30.2. PROTEC GmbH & Co. KG
- 30.2.1. Business overview
- 30.2.2. Product and service offerings
- 30.2.3. Key financial summary
- 30.3. Dentsply Sirona
- 30.3.1. Business overview
- 30.3.2. Product and service offerings
- 30.3.3. Key financial summary
- 30.4. Zimed Healthcare Inc.
- 30.4.1. Business overview
- 30.4.2. Product and service offerings
- 30.4.3. Key financial summary
- 30.5. Carestream Health
- 30.5.1. Business overview
- 30.5.2. Product and service offerings
- 30.5.3. Key financial summary
- 30.6. FUJIFILM Holdings Corporation
- 30.6.1. Business overview
- 30.6.2. Product and service offerings
- 30.6.3. Key financial summary
- 30.7. Z&Z Medical Inc.
- 30.7.1. Business overview
- 30.7.2. Product and service offerings
- 30.7.3. Key financial summary
- 30.8. Agfa-Gevaert N.V.
- 30.8.1. Business overview
- 30.8.2. Product and service offerings
- 30.8.3. Key financial summary
- 30.9. ARI Medical Technology Co. Ltd.
- 30.9.1. Business overview
- 30.9.2. Product and service offerings
- 30.9.3. Key financial summary
Chapter 31. Appendix
- 31.1. Abbreviations
- 31.2. Sources and References
- 31.3. Related Reports