|
市場調査レポート
商品コード
1500297
自動車用ターボチャージャーの世界市場:2024-2031年Global Automotive Turbocharger Market 2024-2031 |
||||||
カスタマイズ可能
|
自動車用ターボチャージャーの世界市場:2024-2031年 |
出版日: 2024年06月04日
発行: Orion Market Research
ページ情報: 英文 160 Pages
納期: 2~3営業日
|
自動車用ターボチャージャーの世界市場は、予測期間(2024年~2031年)にCAGR 13.6%という大幅な成長が見込まれています。市場成長の背景には、低燃費車への需要の高まり、公害規制の強化、自動車業界が世界的に性能向上を重視し続けていることなどがあります。ターボチャージャーは、エンジン効率を高めるために不可欠な自動車部品とみなされています。タービンは、燃焼中にシステムで使用されるエンジン排気ガスを動力源としています。シャフトは、このタービンを使用してコンプレッサーホイールを推進するために使用されます。エンジンはコンプレッサーホイールから圧縮空気を受け取り、外気を取り込んで圧縮します。
市場力学
燃費向上への需要の高まり
自動車用ターボチャージャーの装着による自動車の燃費向上は、自動車用ターボチャージャー市場の成長を促す主な要因です。パワートレインの燃焼エンジンに多くの空気が入るようにすることで、内燃機関とエンジンの出力が向上します。ピストンの排気量を上げることなく高いエンジン出力を実現できるため、これらのターボチャージャーは優れた経済性を提供し、環境にも優しいです。さらに、自動車用ターボチャージャー市場の成長促進要因は、効率の向上、廃棄物の排出量の少なさ、資源の最適利用です。燃料排出量の増加を食い止めるため、政府によってより厳しい規則や規制が設けられています。さらに、政府は規制を強化し、自動車メーカーが自動車を生産する際に遵守しなければならない汚染基準を設けています。
エンジンのダウンサイジングの採用増加
自動車業界では、エンジンのダウンサイジング化が進んでいます。自動車用ターボチャージャー・システムは、ピストンの排気量を変えることなく、エンジンの出力パワーを増加させる。この要因により、高性能で燃費の良いエンジンが小型化されます。製造事業者は、シリンダー数とピストン排気量を減らすことでエンジンを小型化する一方で、エンジン出力とトルクを高めるためにターボチャージャーを取り入れています。自動車用ターボチャージャーの市場は、自動車におけるエンジンのダウンサイジングが受け入れられつつある結果、拡大しています。エンジンの小型化は、燃費の向上、低コスト、高耐久性、安全性の向上につながります。
市場セグメンテーション
自動車用ターボチャージャーの世界市場を詳細に分析すると、技術タイプ、燃料タイプ、車両タイプに分類されます。
可変ジオメトリーターボチャージャー/可変ノズルタービンが最大セグメントと予測
自動車用ターボチャージャーの世界市場は、技術タイプに基づき、可変ジオメトリーターボチャージャー/可変ノズルタービン、ウェイストゲートターボチャージャー、電動ターボチャージャーに細分化されます。このうち、可変ジオメトリーターボチャージャー/可変ノズルタービンは市場で最大のシェアを占めると予想されています。VGTターボチャージャーの採用増加を支えている主な要因は、低エンドトルク、ターボ待ち時間の短縮、異なるエンジン負荷と回転数に対する正確なブースト制御です。その結果、厳しい公害基準を満たし、燃費を向上させ、エンジン性能を高めるために、世界的に広く利用されています。VGTターボチャージャーは、その適応性の高さから、バス、大型トラック、乗用車、商用車など幅広い車種で広く使用されています。性能、効率、信頼性を向上させるため、Cummins Turbo Technologies、BorgWarner Inc.、Garrett Motion Inc.などの主要な市場プレーヤーは、VGT技術の性能を高めるために高度な電子制御ユニット(ECU)の統合に投資しています。
乗用車サブセグメントが大きな市場シェアを占める
自動車用ターボチャージャーの世界市場は、車種別に乗用車、小型商用車(LCV)、大型商用車(HCV)に細分化されます。このうち、乗用車のサブセグメントがかなりのシェアを占めると予想されます。OEMがディーゼル車の製造をガソリン車に切り替えたのは、ディーゼルを対象とした排ガス規制の強化、需要を制限するためのディーゼル燃料とディーゼル車への課税強化、ガソリン車とディーゼル車の燃費と性能の差の縮小など、いくつかの理由があります。さらに、ガソリン直噴(GDI)システムはガソリン自動車で頻繁に見られます。これらのシステムは、従来のガソリンエンジンと比較して燃費を最大20.0%改善しながら、より高い出力とトルク統計を提供します。欧州自動車工業会(ACEA)の2023年5月の発表によると、2022年には世界で8,540万台の自動車が生産され、2021年比で5.7%増加しました。
自動車用ターボチャージャーの世界市場は、北米(米国、カナダ)、欧州(英国、イタリア、スペイン、ドイツ、フランス、その他欧州地域)、アジア太平洋(インド、中国、日本、韓国、その他アジア太平洋地域)、世界のその他の地域(中東とアフリカ、中南米)を含む地域別にさらに細分化されています。
アジア太平洋地域における自動車用ターボチャージャー需要の増加
北米が主要市場シェアを占める
北米は、Advanced Tuning Products, Inc.、Bullseye Power Turbo Chargers、Comp Turbo Technology Inc.、FULL-RACEといった著名な自動車用ターボチャージャーメーカーやプロバイダーが多数進出しているため、全地域の中で大きなシェアを占めています。この成長の主な要因は、国の排ガス規制強化に対応するため、自動車メーカーによる内燃エンジンの採用が増加し、同地域の市場成長を牽引していることです。高性能で燃費の良い自動車への需要が、自動車用ターボチャージャー市場の著しい成長につながっています。燃焼してパワーを生み出す燃料と空気の量を高めるため、ターボチャージャーはエンジンに入る前に空気を圧縮します。この地域の政府は、温室効果ガスの排出を削減するために自動車用ターボチャージャーに対する規制を導入しました。例えば、米国環境保護庁は2023年12月、セダン/ワゴンと自動車SUVの車種はEPAの小型GHG規制の自動車基準を満たさなければならないが、トラックSUV、ピックアップ、ミニバン/バンは別のトラック基準を満たさなければならないとしました。2022年モデルでは、EPAの小型GHG規制では、新車全体の37.0%が乗用車、63.0%がトラックとなります。
世界の自動車用ターボチャージャー市場に参入している主要企業には、BorgWarner Inc.、Cummins Inc.、Honeywell International Inc.、IHI Corp.、三菱重工業株式会社などがあります。市場競争力を維持するために、市場プレイヤーは提携、合併、買収などの戦略を適用することで、事業拡大や製品開発にますます注力しています。
Global Automotive Turbocharger Market Size, Share & Trends Analysis Report by Technology Type (Variable Geometry Turbocharger/ Variable Nozzle Turbine, Wastegate Turbocharger and Electric Turbocharger), by Fuel Type (Gasoline, Diesel and Alternate Fuel/ CNG), by Vehicle Type (Passenger Cars, Light Commercial Vehicles (LCV) and Heavy Commercial Vehicles (HCV)) Forecast Period (2024-2031)
The global automotive turbocharger market is anticipated to grow at a significant CAGR of 13.6% during the forecast period (2024-2031). The market growth is attributed to the increasing demand for fuel-efficient cars, stricter pollution regulations, and the automotive industry's ongoing emphasis on improving performance globally. Turbochargers are regarded as an essential automobile part ability to boost engine efficiency. The turbine is powered by engine exhaust gas used by the system during combustion. A shaft is used to propel the compressor wheel by use of this turbine. The engine receives compressed air from the compressor wheel, which draws in and compresses outside air.
Market Dynamics
Growing Demand for Improving Fuel Efficiency
The increased fuel efficiency of automobiles by the installation of automotive turbochargers is a major factor driving the growth of the automotive turbocharger market. Allowing more air to enter the combustion engine of powertrains will increase internal combustion and engine power output. Owing to their ability to deliver high engine power without raising piston displacement, these turbochargers offer excellent economy and are environmentally benign. Additionally, the primary drivers of the automotive turbocharger market's growth are improved efficiency, low waste output, and optimal resource usage. Stricter rules and restrictions have been put in place by the government to stop the rising fuel emissions. Additionally, the government is enforcing regulations and establishing pollution standards that auto manufacturers must adhere to when producing vehicles.
Increasing Adoption of Downsizing of Engines
Increasing downsizing of car engines has been a common practice in the automotive industry. Without altering the piston displacement, the automotive turbocharger system increases engine output power. This factor causes engines with higher performance and better fuel efficiency to be reduced in size. Manufacturing businesses are incorporating turbochargers to increase engine power and torque while downsizing engines by reducing the number of cylinders and piston displacement. The market for automotive turbochargers is expanding as a result of the growing acceptance of engine downsizing in cars. Reduced engine size results in increased fuel efficiency, low cost, high durability, and safety.
Market Segmentation
Our in-depth analysis of the global automotive turbocharger market includes the following segments technology type, fuel type, and vehicle type.
Variable Geometry Turbocharger/Variable Nozzle Turbine is Projected to Hold as the Largest Segment
Based on the technology type, the global automotive turbocharger market is sub-segmented into variable geometry turbochargers/variable nozzle turbines, wastegate turbochargers, and electric turbochargers. Among these variable geometry turbocharger/variable nozzle turbines, the sub-segment is expected to hold the largest share of the market. The primary factors supporting the increased adoption of VGT turbochargers owing to low-end torque, reduced turbo latency, and accurate boost control for different engine loads and speeds. Resulting in being extensively utilized globally to fulfill strict pollution standards, boost fuel efficiency, and enhance engine performance. Owing to their adaptability, VGT turbochargers are widely used in a wide range of vehicle types, including buses, heavy-duty trucks, and passenger and commercial cars. To improve performance, efficiency, and reliability, the key market players including Cummins Turbo Technologies, BorgWarner Inc., and Garrett Motion Inc. are investing in the integration of advanced electronic control units (ECUs) to enhance the performance of VGT technology.
Passenger Cars Sub-segment to Hold a Considerable Market Share
Based on vehicle type, the global automotive turbocharger market is sub-segmented into passenger cars, light commercial vehicles (LCV), and heavy commercial vehicles (HCV). Among these, the passenger cars sub-segment is expected to hold a considerable share of the market. OEMs have switched from manufacturing diesel vehicles to gasoline-powered ones for several reasons, such as stricter emissions laws that target diesel, higher taxes on diesel fuel and vehicles to limit demand, and the closing gap between gasoline and diesel models' fuel efficiency and performance. Furthermore, Gasoline Direct Injection (GDI) systems are frequently seen in gasoline-powered automobiles. These systems provide higher power and torque statistics while improving fuel efficiency by up to 20.0% when compared to conventional gasoline engines. According to the European Automobile Manufacturers' Association (ACEA), in May 2023, in 2022, 85.4 million motor vehicles were produced globally, an increase of 5.7% compared to 2021.
The global automotive turbocharger market is further segmented based on geography including North America (the US, and Canada), Europe (UK, Italy, Spain, Germany, France, and the Rest of Europe), Asia-Pacific (India, China, Japan, South Korea, and Rest of Asia-Pacific), and the Rest of the World (the Middle East & Africa, and Latin America).
Increasing Demand for Automotive Turbochargers in Asia-Pacific
North America Holds Major Market Share
Among all the regions, North America holds a significant share owing to numerous prominent automotive turbocharger companies and providers such as Advanced Tuning Products, Inc., Bullseye Power Turbo Chargers, Comp Turbo Technology Inc., and FULL-RACE in the region. The growth is mainly attributed to the increasing adoption of internal combustion engines by automakers in response to the nation's stronger emission regulations driving the market growth in the region. The demand for high-performance, fuel-efficient vehicles has led to significant growth in the automotive turbocharger market. To enhance the amount of fuel and air that burn and produce power, turbochargers compress air before it enters the engine. The government in the region introduced regulations for automotive turbochargers to reduce greenhouse gas emissions. For instance, in December 2023, the US Environment Protection Agency that the sedan/wagon and car SUV vehicle types must meet the car standards under EPA's light-duty GHG regulations, while truck SUVs, pickups, and minivans/vans must meet separate truck standards. In the model year 2022, 37.0% of all new vehicles were cars and 63.0% of all new vehicles were trucks under EPA's light-duty GHG regulations.
The major companies serving the global automotive turbocharger market include BorgWarner Inc., Cummins Inc., Honeywell International Inc., IHI Corp., and Mitsubishi Heavy Industries, Ltd., among others. The market players are increasingly focusing on business expansion and product development by applying strategies such as collaborations, mergers, and acquisitions to stay competitive in the market. For instance, in April 2024, Accelleron partnered with BEMAC to improve access to digital solutions for engines and turbochargers. The role of digital solutions is growing resulting in new seamless access to Accelleron's digital capabilities via MaSSA-One enabling a smooth transition to digitalization and contributing to efficient operations.
Recent Development