デフォルト表紙
市場調査レポート
商品コード
1686663

アジア太平洋の防爆機器:市場シェア分析、産業動向、成長予測(2025年~2030年)

Asia-Pacific Explosion Proof Equipment - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)


出版日
ページ情報
英文 175 Pages
納期
2~3営業日
カスタマイズ可能
適宜更新あり
価格
価格表記: USDを日本円(税抜)に換算
本日の銀行送金レート: 1USD=144.63円
アジア太平洋の防爆機器:市場シェア分析、産業動向、成長予測(2025年~2030年)
出版日: 2025年03月18日
発行: Mordor Intelligence
ページ情報: 英文 175 Pages
納期: 2~3営業日
GIIご利用のメリット
  • 全表示
  • 概要
  • 目次
概要

アジア太平洋の防爆機器の市場規模は2025年に30億1,000万米ドルと推定され、予測期間(2025年~2030年)のCAGRは9.06%で、2030年には46億4,000万米ドルに達すると予測されます。

Asia-Pacific Explosion Proof Equipment-Market-IMG1

航空・航空機整備現場、建設現場、暖房・換気・空調システム、製造機械・加工装置、鉱業、石油・ガス採掘など、さまざまな分野で防爆機器が利用できます。産業分野で最も一般的な機器には、照明、監視、信号システムなどがあります。

主なハイライト

  • 防爆機器の市場は、アジア諸国、特に中国とインドにおける工業化の成長によって牽引されると予想されます。アジア太平洋全域の産業環境において、危険な塗料、化学物質、その他の可燃性粉塵の存在が拡大していることから、爆発事故が増加しています。
  • 石油・ガス産業と化学産業は爆発を起こしやすいため、予測期間中に市場の成長を牽引すると予想されます。石油・ガス産業では、防爆には2つの要件があります。機器を適切な基準で製造し、さらにその基準に沿って設置・保守する必要があります。防爆機器のニーズは、エネルギー需要の増加、新しい鉱山や石油・ガス埋蔵量の探査需要によって高まっています。
  • さらに、統合システムに対する需要の増加、オートメーション分野の進歩、産業分野の成長、危険区域の取り扱いに関する政府の厳しい規制が、市場の成長を促進すると予測されています。さまざまな組織が、労働力とインフラの安全を確保するために特定の設備基準を設定しています。OSHAは、職場の基準を定めることで、従業員に安全で働きやすい環境を提供することに積極的に取り組んでいます。
  • 危険区域用機器業界は成長を遂げているが、さらなる開発を妨げる要因がいくつかあります。機器に関連する多額の費用と、機器の操作には有資格の専門家が必要であることが、市場の拡大に影響を与えている主な障害です。

アジア太平洋の防爆機器の動向

石油・ガス産業が著しい成長を示す

  • 石油・ガス産業の労働者は、危険な状況下で作業しなければならないことが多いです。大量の可燃性液体、ガス、蒸気、可燃性粉塵が存在する状況では、安全性が最も重要です。
  • 石油・ガス施設では、可燃性物質の近くにある電気機器や機械から発火する確率が著しく高くなります。石油・ガス精製・処理施設には危険な化学化合物、石油・ガスが存在するため、電気火花がそのような化合物に引火する危険性があります。したがって、この業界は、このような危険区域における規制の需要で大きなシェアを占めています。加えて、この業界は作業員の安全に対する規制が厳しく、これがさらに需要に寄与しています。
  • ハウジング用低電圧IPカメラの登場は、防爆カメラ技術における最も重要な開発の一つです。従来のAC110Vの高電圧設置では、設置のためのインフラや人員を追加する必要があったのに比べ、固定式PoE+カメラではコストを大幅に削減できる新たな機会が生まれています。PoE+カメラの進歩は、従来の24ボルトシステムとは対照的でもあります。
  • さらに、インドや中国などの国々で、それぞれアラビア海やジュガール盆地で石油埋蔵量が発見されたことも、このセグメントの成長を促進すると予測されています。Petroleum Planning and Analysis Cellによると、2024年度末までに、インドの原油生産量は、探査プロセスへの今後の投資の結果、回復する見込みです。このような開発により、防爆機器の需要が高まることが予想されます。

中国が最も高い市場シェアを占める

  • 中国は、生産設備と工作機械の世界の主要生産国および輸出国のひとつです。同国では、製造活動の増加により、過去10年間に機器や工具の生産が伸びてきました。その結果、防爆機器の採用率はこの成長の影響を受けています。
  • 耐圧防爆ソリューションの需要は、生産工程における自動化の拡大が牽引すると予想されます。さらに、多くの工業・製造工場では、施設や設備の安全性と良好な作動状態を維持するため、スタッフが定期的に現場検査を実施しており、決められたルートを巡回し、途中の特定のポイントで検査装置をチェックしています。
  • 生産性向上への要求が高まるにつれ、製造業のインフラ、プロセス、技術は変化しています。こうした産業動向の結果、防爆機器の採用は増加すると予想されます。
  • IEAによると、2040年までに中国は世界の天然ガス需要の2,800億立方メートルを占めると予想されています。2040年までに日量1,300万バレルの純輸入が予測される中国は、米国を抜いて世界最大の石油消費国になる可能性が高いです。中国はすでに2030年の二酸化炭素排出削減目標を設定しています。中国は2060年までにカーボンニュートラルを目指しています。そのためには、クリーンエネルギーの利用を増やし、化石燃料に依存する中国にとって有害な排出を削減することが急務です。このことは、今後数年間で、進行中のプロジェクトがますます増えていくことを示しています。
  • 探鉱・生産施設の増加や新たな安全規制の導入により、成長エンジンとして台頭しつつあります。前年には、中国東北部の山東省で爆発事故が発生し、さまざまな鉱山労働者がほぼ2日間閉じ込められ、爆発によって通信システムが損傷し、すべての連絡が途絶えました。中国での鉱山事故は非常に多く、企業の保護実績は乏しく、規制も十分に実施されていないため、この地域での防爆機器の必要性が高まっています。

アジア太平洋の防爆機器産業の概要

アジア太平洋の防爆機器市場は断片化されており、複数のプレーヤーで構成されています。市場シェアの面では、現在、少数の大手企業が市場を独占しています。しかし、技術革新と技術開拓により、多くの企業が新規契約の獲得や開発によって市場での存在感を高めています。例えば

  • 2023年12月、R.シュタールはEx eスイッチングおよび配電盤を発表しました。新しい8530および8550シリーズの設計は、40Aから63Aに拡張され、両バージョンとも最大125Aの動作電流が大きな特徴です。
  • 2023年10月、Pepperl+Fuchsは、新しいSmartEx 03高性能5Gスマートフォンの発売により、危険区域でのデジタル化プロセスを新たなレベルに引き上げました。ボイスオーバーIP、プログラマブルボタン、Wi-Fi専用モード、リモート診断、インダストリー4.0の最も多様なアプリケーションを実装するためのリモートサポートなど、すべての業界要件を満たす幅広い機能を備えています。

その他の特典:

  • エクセル形式の市場予測(ME)シート
  • 3ヶ月間のアナリストサポート

目次

第1章 イントロダクション

  • 調査の前提条件と市場定義
  • 調査範囲

第2章 調査手法

第3章 エグゼクティブサマリー

第4章 市場洞察

  • 市場概要
  • 産業バリューチェーン分析
  • 業界の魅力度-ポーターのファイブフォース分析
    • 供給企業の交渉力
    • 買い手の交渉力
    • 新規参入業者の脅威
    • 代替品の脅威
    • 競争企業間の敵対関係
  • 業界規制
  • COVID-19の市場への影響評価

第5章 市場力学

  • 市場促進要因
    • 危険地域・物質の取り扱い規制の強化
    • 新しい鉱山や石油・ガス資源の探査需要を促進するエネルギー需要の増加
  • 市場抑制要因
    • 装置の設置コストが高いため、投資が割高になること

第6章 市場セグメンテーション

  • タイプ別
    • 防爆
    • 防爆
    • 爆発隔離
  • ゾーン別
    • ゾーン0
    • ゾーン20
    • ゾーン1
    • ゾーン21
    • ゾーン2
    • ゾーン22
  • エンドユーザー別
    • 製薬
    • 化学・石油化学
    • エネルギー・電力
    • 鉱業
    • 食品加工
    • 石油・ガス
    • その他のエンドユーザー
  • システム別
    • 電力供給システム
    • マテリアルハンドリング
    • モーター
    • 自動化システム
    • 監視システム
    • その他のシステム
  • 国別
    • 中国
    • インド
    • 日本

第7章 競合情勢

  • 企業プロファイル
    • R. Stahl Group
    • Marechal Electric Group
    • Adalet
    • Bartec GmbH
    • Rae Systems(Acquired By Honeywell)
    • Pepperl+Fuchs
    • Alloy Industry Co. Ltd
    • Cordex Instruments
    • ABB Limited
    • G. M. International SRL
    • Eaton Corporation PLC
    • Warom Technology Inc.
    • Phoenix Mecano
    • MAM Explosion-proof Technology(Shanghai)Co. Ltd
    • CZ Electric Co. Ltd

第8章 投資分析

第9章 市場の将来

目次
Product Code: 53935

The Asia-Pacific Explosion Proof Equipment Market size is estimated at USD 3.01 billion in 2025, and is expected to reach USD 4.64 billion by 2030, at a CAGR of 9.06% during the forecast period (2025-2030).

Asia-Pacific Explosion Proof Equipment - Market - IMG1

In a variety of sectors, such as aeronautics and aircraft maintenance sites, construction sites, heating, ventilation, and air conditioning systems, manufacturing machines and processing units, mining, and oil and gas extraction, explosion-proof equipment is available. Some of the most common types of equipment in the industrial sector are lighting, surveillance, and signal systems.

Key Highlights

  • The market for explosion-proof equipment is expected to be driven by the growth of industrialization in Asian countries, particularly China and India. In view of the growing presence of dangerous paints, chemicals, and other combustible dust in industrial environments throughout Asia-Pacific, there has been a rise in explosions.
  • The oil and gas and chemical industries are expected to drive the growth of the market during the forecast period, as these industries are more prone to explosions. Explosion proofing has two requirements in the oil & gas industry: equipment must be built to the right standards and then installed and maintained in line with the further standards. The need for explosion-proof equipment is driven by increasing energy demands and demand for exploration of new mines and oil and gas reserves.
  • Moreover, increasing demand for integrated systems, progress in the automation sector, growth in industrial sectors, and stringent government regulations in handling hazardous areas are projected to foster the market's growth. Various organizations are setting specific equipment standards to ensure the safety of the workforce and infrastructure. OSHA has been proactively working toward providing safe and conducive working conditions for employees by stipulating standards for workplaces.
  • Although the hazardous area equipment industry has experienced growth, there are several factors that impede its further development. The significant expenses associated with the equipment and the necessity for qualified professionals to operate them are the primary obstacles affecting the expansion of the market.

Asia-Pacific Explosion Proof Equipment Market Trends

The Oil and Gas Industry to Show Significant Growth

  • Workers in the oil and gas industry frequently have to work in dangerous conditions. In situations where significant quantities of flammable liquids, gases, vapors, or combustible dust are present, safety is of paramount importance.
  • The probability of ignition from electric devices and machines that are close to flammable substances increases significantly in oil & gas facilities. The presence of dangerous chemical compounds, oil, and gas in oil & gas refining and processing facilities poses a risk of electrical sparks igniting such compounds. Hence, the industry commands a large share of the demand for regulations in such hazardous areas. In addition, the industry is highly regulated for worker safety, which further contributes to the demand.
  • The advent of low-voltage IP cameras for housings is one of the most significant developments in explosion-proof camera technology. Compared to traditional high-power 110 V AC installations, which require additional infrastructure and personnel to install them, there are new opportunities for fixed PoE+ cameras that can significantly reduce costs. The advancement of PoE+ cameras is also in contrast to the conventional 24-volt system.
  • Moreover, the discovery of oil reserves in countries such as India and China, in the Arabian Sea and Juggar Basin, respectively, is also projected to drive the segment's growth. According to the Petroleum Planning and Analysis Cell, by the end of FY2024, India's crude oil production is poised to recover as a result of upcoming investments in the exploration processes. Such developments are expected to drive the demand for explosion-proof equipment.

China to Hold the Highest Market Share

  • China is one of the major producers and exporters of production equipment and machine tools globally. Equipment and tools production in the country has grown in the past decade as a result of an increase in manufacturing activities. Consequently, the rate of adoption of explosion-resistant equipment is influenced by this growth.
  • The demand for explosion-proof solutions is anticipated to be driven by the growing use of automation in production processes. In addition, staff regularly carry out field inspections on a regular basis to keep facilities and equipment safe and in good working order at many industrial and manufacturing plants by patrolling the defined routes and checking inspection devices at selected points along the way.
  • Allied pressures have led to changes in the underlying infrastructure, processes, and technologies of the manufacturing sector as a result of growing productivity requirements. The adoption of explosion-proof equipment is expected to increase as a result of these industry trends.
  • According to the IEA, by 2040, China is expected to account for 280 billion cubic meters of global natural gas demand. With a projected net import of 13 million barrels per day by 2040, China is likely to overtake the United States as the world's largest oil consumer. The country has already set a 2030 carbon emission reduction target. By 2060, China wants to be carbon neutral. To that end, there is an urgent need to increase the use of clean energy and reduce emissions that are detrimental to China's reliance on fossil fuels. This shows that in the coming years, there will be a growing number of projects underway.
  • The country is emerging as a growth engine due to the increasing exploration and production facilities and the introduction of new safety regulations. In the previous year, various miners in China's northeastern Shandong province had been trapped for almost two days following an explosion, where the blast damaged their communication systems, cutting off all contact. Mining accidents are pretty common in China, where enterprises have a poor protection record and regulations are not adequately enforced, which is driving the need for explosion-proof equipment in the region.

Asia-Pacific Explosion Proof Equipment Industry Overview

The Asia-Pacific explosion-proof equipment market is fragmented and consists of several players. In terms of market share, few major players currently dominate the market. However, with innovation and technological development, many companies are increasing their market presence by securing new contracts and by tapping new markets. For instance,

  • In December 2023, R. STAHL introduced the Ex e switching and power distribution boards, which shall be protected by new 8530 and 8550 explosion-resistant components. The design of the new 8530 and 8550 series, which has been extended to 63 A from 40 A with an operating current of up to 125 A in both versions, is a major feature.
  • In October 2023, Pepperl+Fuchs took digitization processes in hazardous areas to a new level with the launch of the new SmartEx 03 high-performance 5G smartphone. It is equipped with a wide range of features that meet all industry requirements, including voice over IP, programmable buttons, Wi-Fi only mode, remote diagnostics, and remote support for the implementation of the most diverse applications of Industry 4.0.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET INSIGHTS

  • 4.1 Market Overview
  • 4.2 Industry Value Chain Analysis
  • 4.3 Industry Attractiveness - Porter's Five Forces Analysis
    • 4.3.1 Bargaining Power of Suppliers
    • 4.3.2 Bargaining Power of Buyers
    • 4.3.3 Threat of New Entrants
    • 4.3.4 Threat of Substitute Products
    • 4.3.5 Intensity of Competitive Rivalry
  • 4.4 Industry Regulation
  • 4.5 Assessment of the Impact of COVID-19 on the Market

5 MARKET DYNAMICS

  • 5.1 Market Drivers
    • 5.1.1 Stricter Regulations for Handling Hazardous Areas and Substances
    • 5.1.2 Increasing Energy Requirements Driving the Demand for Exploration of New Mines and Oil and Gas Resources
  • 5.2 Market Restraints
    • 5.2.1 Pricey Investments Due to High Costs of Installation of the Equipment

6 MARKET SEGMENTATION

  • 6.1 By Type
    • 6.1.1 Explosion Proof
    • 6.1.2 Explosion Prevention
    • 6.1.3 Explosion Segregation
  • 6.2 By Zone
    • 6.2.1 Zone 0
    • 6.2.2 Zone 20
    • 6.2.3 Zone 1
    • 6.2.4 Zone 21
    • 6.2.5 Zone 2
    • 6.2.6 Zone 22
  • 6.3 By End User
    • 6.3.1 Pharmaceutical
    • 6.3.2 Chemical and Petrochemical
    • 6.3.3 Energy and Power
    • 6.3.4 Mining
    • 6.3.5 Food Processing
    • 6.3.6 Oil & Gas
    • 6.3.7 Other End Users
  • 6.4 By System
    • 6.4.1 Power Supply System
    • 6.4.2 Material Handling
    • 6.4.3 Motor
    • 6.4.4 Automation System
    • 6.4.5 Surveillance System
    • 6.4.6 Other Systems
  • 6.5 By Country
    • 6.5.1 China
    • 6.5.2 India
    • 6.5.3 Japan

7 COMPETITIVE LANDSCAPE

  • 7.1 Company Profiles
    • 7.1.1 R. Stahl Group
    • 7.1.2 Marechal Electric Group
    • 7.1.3 Adalet
    • 7.1.4 Bartec GmbH
    • 7.1.5 Rae Systems (Acquired By Honeywell)
    • 7.1.6 Pepperl+Fuchs
    • 7.1.7 Alloy Industry Co. Ltd
    • 7.1.8 Cordex Instruments
    • 7.1.9 ABB Limited
    • 7.1.10 G. M. International SRL
    • 7.1.11 Eaton Corporation PLC
    • 7.1.12 Warom Technology Inc.
    • 7.1.13 Phoenix Mecano
    • 7.1.14 MAM Explosion-proof Technology (Shanghai) Co. Ltd
    • 7.1.15 CZ Electric Co. Ltd

8 INVESTMENT ANALYSIS

9 FUTURE OF THE MARKET