洋上風力タービン設置船の市場レポート：2031年までの動向、予測、競合分析

世界の洋上風力タービン設置船市場の将来は、陸上風力と洋上風力市場に機会があり、有望視されています。世界の洋上風力タービン設置船市場は、2025年から2031年にかけてCAGR 15.6％で成長すると予想されます。この市場の主な促進要因は、洋上風力発電プロジェクトへの投資の増加、再生可能エネルギーへの需要の高まり、風力タービンの大型化・大容量化です。

• Lucintelは、タイプ別では重量物運搬船が予測期間中に最も高い成長を遂げると予測しています。
• 用途別では、陸上風力発電が高い成長が見込まれます。
• 地域別では、欧州が予測期間中に最も高い成長が見込まれます。

洋上風力タービン設置船市場の新たな動向

洋上風力タービン設置船市場は、技術、規制、市場需要の進歩に後押しされた多くの重要な動向によって決定されています。これらの動向は、設置船の能力を向上させ、国際的な洋上風力発電プロジェクトにおける設置船の重要性を高めています。以下は、洋上風力タービン設置船市場における5つの重要な動向です。

• 大型設置船の使用：洋上風力タービンの大型化に伴い、より大きなコンポーネントとより重い荷重に対応できる大型設置船の必要性が高まっています。このような船舶は、タービンをより効率的かつ正確に運搬・設置し、設置時間とコストを削減するように設計されています。大型船への移行は、新世代の風力タービンが深海に設置される欧州で特に顕著です。このため、新しい洋上風力発電計画のニーズに対応できる、より洗練された専用の設置船の建造が今後も促進されると思われます。
• 浮体式風力タービン設置船の応用：浮体式風力タービン技術の普及に伴い、浮体式タービンの設置に特化した専用設置船のニーズが高まっています。浮体式風力タービンは、固定式風力タービンが設置できない水深の深い場所への設置など、浮体式風力タービンがもたらす特殊な課題に適しています。浮体式風力タービンの設置用船舶は、特に浮体式風力技術の採用が進んでいる日本や米国西海岸などの地域で、主要な市場セグメントを形成すると予測されています。この動向は、設置船の新たな市場と機会を生み出しています。
• 持続可能性と排出削減：環境に優しく、低排出ガスな洋上風力タービン設置船を作ろうという動きが出てきています。環境規制が強化され、世界が持続可能性に向かう中、メーカーは二酸化炭素排出量の少ない船舶の建造に目を向けています。このような技術革新には、代替燃料の使用、燃料効率、グリーン技術が関わっています。政府や企業がカーボンニュートラルの達成を目指す中、グリーンエネルギーへの注目の高まりに対応する持続可能な設置船への需要は高いです。
• 設置船の自動化とデジタル化：洋上風力タービン設置船の市場でも、デジタル化と自動化が進んでいます。センサー、自動クレーン、データ分析など、最先端のデジタル技術を搭載した船舶は、作業効率、安全性、正確性を高めることができます。自動化は特に、人件費の節約や設置作業における人為的ミスの回避に役立ちます。また、デジタル技術の採用は、船舶の性能をリアルタイムで監視し、予知保全機能を実現します。洋上風力発電市場が成長するにつれ、こうした技術革新は設置船の機能を変革し、効率的で経済的なものにしつつあります。
• 新興国市場における洋上風力発電プロジェクトの開発：新興国市場、特にアジアと米国では、洋上風力発電の開発が拡大しています。このため、水深が深く、波高が高く、孤立した場所など、新しい地域特有の条件に対応するよう特別に設計された設置船の需要が高まっています。インド、米国、日本などの国々における洋上風力発電プロジェクトの拡大は、設置船に対する高い需要をもたらし、その結果、新造船や改造船への投資に拍車をかけています。これらの市場が成長するにつれて、据付に特化した機器に対する要件は増加し続け、洋上風力タービン設置船の販売が増加します。

こうした新たな動向は、船舶の能力や効率を高め、拡大する洋上風力産業のニーズに対応することで、洋上風力タービン設置船市場に大きな影響を与えています。より大型で環境に優しいハイテク船への移行は、洋上風力発電設備の効率を全体的に高める一方、新興市場における新たな市場機会は、特殊な設置船の需要を促進しています。

洋上風力タービン設置船市場における最近の動向

洋上風力タービン設置船の販売市場は、技術の進歩と再生可能エネルギーに向けた国際的な動きの両方により、著しい成長を遂げています。より大型で性能の高い設置船の開発や、世界中で増加する洋上風力発電所など、さまざまな重要な開発がこの市場に影響を与えています。近年の最も重要な動向のうち5つを以下に説明します。これらは、今日の市場を形成し、明日の成長を推し進める主要な促進要因です。

• より大型で効率的な船舶の開発：洋上風力タービン設置船の現在の開発は、船の大型化と効率化が中心となっています。新造船は、より大型の風力タービンを搭載するために建造されており、より強力で効率的な据付装置が必要とされます。こうした開発により、迅速な設置が可能になり、より柔軟な運用が可能になります。洋上風力タービンの大型化に伴い、次世代風力タービンに対応できる大型船の必要性は非常に高まっています。
• ハイブリッド技術とグリーン技術の採用：環境意識の高まりから、一部の造船会社は洋上風力タービン設置船にハイブリッド技術やグリーン技術を組み込んでいます。これらの技術は、設置船の二酸化炭素排出量を最小限に抑え、エネルギー効率を高めるために設計されています。最近の技術革新には、水素やバイオ燃料のような代替燃料の利用や省エネ技術の採用が含まれます。これらのグリーンテクノロジーは、世界の持続可能性の目標と一致しており、新造船を設計する際の重要な要素になりつつあります。
• 浮体式風力タービンの増加：浮体式風力タービン技術は、特に水深が深く、通常の固定式タービンが適用できないような場所で普及しつつあります。設置船は、浮体式風力タービン特有の要求を満たすように設計されており、一般的に従来のタービンとは異なる設置方法が含まれています。浮体式風力発電所の成長は、特定の設置船に対する新たな需要を生み出し、それによって日本、米国、欧州などの地域で設置船市場が拡大しています。
• 新興市場の洋上風力プロジェクトへの投資の増加：新興市場、特にアジアと北米では、洋上風力発電に多額の投資を行っています。米国は東海岸における洋上風力発電の開発で大きく前進し、インドや日本などの国々は洋上風力発電プロジェクトを加速させています。これらの新興市場では、それぞれの地域や環境に特有の課題に合わせてカスタマイズされたソリューションが必要なため、特殊な洋上風力タービン設置船が求められています。
• より高度な自動化のための技術統合：洋上風力タービン設置船は、据付効率を高めるため、自動化やデジタル技術の導入が進んでいます。こうした技術革新には、自動クレーン、リアルタイムの性能監視、予知保全のためのデータ分析などが含まれます。自動化の利用は、人的作業の必要性を減らし、ミスを最小限に抑え、より効率的な作業につながります。市場の成長とともに、自動化における技術的進歩は、洋上風力タービン設置船の全体的な性能と費用対効果を改善し続けると思われます。

洋上風力タービン設置船業界の現在の動向は、技術革新、持続可能性、設計革新に牽引され、大幅な成長を促進しています。浮体式風力タービンの成長や新興市場への洋上風力発電所の普及と相まって、より大型で効率的な船舶への需要が船舶メーカーに新たな機会をもたらしています。これらの進歩は、洋上風力タービン設置船市場の将来を形成し、今後数年間のさらなる成長につながります。

目次

第1章 エグゼクティブサマリー

第2章 世界の洋上風力タービン設置船市場：市場力学

• イントロダクション、背景、分類
• サプライチェーン
• 業界の促進要因と課題

第3章 2019年から2031年までの市場動向と予測分析

• マクロ経済動向（2019～2024年）と予測（2025～2031年）
• 世界の洋上風力タービン設置船市場の動向（2019～2024年）と予測（2025～2031年）
• タイプ別
  • 自走式ジャッキアップ船
  • 通常のジャッキアップ船
  • 重量物運搬船
• 用途別
  • 陸上風力
  • 洋上風力

第4章 2019年から2031年までの地域別市場動向と予測分析

• 地域別世界の洋上風力タービン設置船市場
• 北米の洋上風力タービン設置船市場
• 欧州の洋上風力タービン設置船市場
• アジア太平洋地域の洋上風力タービン設置船市場
• その他地域の洋上風力タービン設置船市場

第5章 競合分析

• 製品ポートフォリオ分析
• 運用統合
• ポーターのファイブフォース分析

第6章 成長機会と戦略分析

• 成長機会分析
  • タイプ別
  • 用途別
  • 地域別
• 世界の洋上風力タービン設置船市場における新たな動向
• 戦略分析
  • 新製品開発
  • 世界の洋上風力タービン設置船市場の能力拡大
  • 世界の洋上風力タービン設置船市場における合併、買収、合弁事業
  • 認証とライセンシング

第7章 主要企業の企業プロファイル

• A2SEA
• MPI-Offshore
• Seajacks
• Fred. Olsen Windcarrier
• Geosea
• Van Oord
• Jack-Up Barge
• SEAFOX
• Swire Blue Ocean
• Gaoh Offshore

The future of the global offshore wind turbine installation vessel market looks promising with opportunities in the onshore wind and offshore wind markets. The global offshore wind turbine installation vessel market is expected to grow with a CAGR of 15.6% from 2025 to 2031. The major drivers for this market are the rising investment in offshore wind energy projects, the growing demand for renewable energy, and the increasing size & capacity of wind turbines.

• Lucintel forecasts that, within the type category, heavy lift vessel is expected to witness the highest growth over the forecast period.
• Within the application category, onshore wind is expected to witness higher growth.
• In terms of region, Europe is expected to witness the highest growth over the forecast period.

Emerging Trends in the Offshore Wind Turbine Installation Vessel Market

The offshore wind turbine installation vessel market is being determined by a number of important trends fueled by advances in technology, regulation, and market demand. The trends are improving the abilities of installation vessels and making them more important to offshore wind projects internationally. The following are five important trends in the offshore wind turbine installation vessel market.

• Use of Larger Installation Vessels: With the ever-growing size of offshore wind turbines, there is a growing need for larger installation vessels that can accommodate the bigger components and heavier loads. Such vessels are engineered to carry and install turbines with greater efficiency and accuracy, decreasing installation time and cost. The move towards larger ships is especially marked in Europe, where the new generation of wind turbines is being installed in the deep water. This will continue to encourage the creation of more sophisticated, dedicated installation vessels that will be capable of serving the needs of newer offshore wind schemes.
• Application of Floating Wind Turbine Installation Vessels: With the increasing popularity of floating wind turbine technology, there has been increasing need for purpose-built installation vessels tailored to installing floating turbines. The vessels are better suited to the special challenges posed by floating wind turbines, such as their installation in deeper water where fixed-bottom turbines cannot be installed. Installation vessels for floating wind turbines are projected to form a major market segment, particularly in areas such as Japan and the U.S. West Coast, where floating wind technology is being increasingly adopted. This trend is creating new markets and opportunities for installation vessels.
• Sustainability and Reduced Emissions: There is an emerging trend towards creating environmentally friendly and low-emission offshore wind turbine installation vessels. As more environmental regulations are put in place and the world moves towards sustainability, manufacturers are turning their attention to creating vessels with lower carbon emissions. Such innovations involve alternative fuel usage, fuel efficiency, and green technology. With governments and businesses seeking to achieve carbon neutrality, demand for sustainable installation vessels that respond to the increased focus on green energy is high.
• Automation and Digitalization of Installation Vessels: The market for offshore wind turbine installation vessels is also adopting digitalization and automation. Vessels with cutting-edge digital technologies, such as sensors, automated cranes, and data analytics, can enhance operational efficiency, safety, and accuracy. Automation is especially useful in saving labor costs and avoiding human error in installations. Digital technology adoption also enables real-time monitoring of vessel performance and predictive maintenance capabilities. As the offshore wind market grows, such technological innovations are transforming the manner in which installation vessels function, making them efficient and economical.
• Growth of Offshore Wind Projects in Developing Markets: Developing markets, particularly in Asia and the U.S., are witnessing growth in offshore wind development. This is fueling demand for installation vessels specifically designed to meet these new regions' unique conditions, such as deeper waters, greater wave heights, and more isolated locations. Offshore wind project expansions in nations like India, the U.S., and Japan are resulting in high demand for installation vessels, thereby fueling investment in new and modified vessels. As these markets grow up, requirements for installation-specific equipment will continue to increase, causing more sales of offshore wind turbine installation vessels.

These new trends are heavily influencing the offshore wind turbine installation vessel market by boosting vessel capabilities, efficiency, and responding to the needs of an expanding offshore wind industry. The transition towards bigger, greener, and high-tech vessels is enhancing the efficiency of offshore wind installations overall, while new market opportunities in emerging markets are driving the demand for specialized installation vessels.

Recent Developments in the Offshore Wind Turbine Installation Vessel Market

The sales market for offshore wind turbine installation vessels is seeing significant growth due to both technological progress and the international movement towards renewable energy. Various important developments are impacting this market, such as the development of bigger, more capable installation vessels and the increasing offshore wind farms across the globe. Five of the most important developments over recent years are explained below, as they are the major drivers shaping the market today and pushing the growth forward tomorrow.

• Development of Larger and More Efficient Vessels: Current developments in offshore wind turbine installation ships are centered on making the ships larger and more efficient. The new ships are made to carry larger wind turbines, which need stronger and more efficient installation equipment. These developments enable quicker installation and more operational flexibility. As offshore wind turbines grow in size and magnitude, the need for larger ships that can support the next generation of turbines has increased tremendously.
• Hybrid and Green Technology Adoption: Due to increased environmental awareness, some ship builders are integrating hybrid and green technologies into offshore wind turbine installation vessels. These technologies are designed to minimize the carbon footprint of installation vessels and make them more efficient in terms of energy. Recent innovations involve the utilization of alternative fuels like hydrogen and biofuels, and the adoption of energy-saving technology. These green technologies are in sync with worldwide sustainability objectives and are increasingly becoming an important factor while designing new ships.
• Rise in Floating Wind Turbine Installations: Floating wind turbine technology is becoming popular, particularly where there are deep waters and normal fixed-bottom turbines are not applicable. Installation ships are being engineered to meet the unique demands of floating wind turbines, which generally include different means of installation compared to traditional turbines. Growth in floating wind farms is generating fresh demand for specific installation ships, thereby growing the market for them in areas such as Japan, the U.S., and Europe.
• Increasing Investment in Emerging Markets' Offshore Wind Projects: Emerging markets, particularly in Asia and North America, are investing heavily in offshore wind power. The United States has taken major leaps forward in developing offshore wind capacity along its East Coast, and nations such as India and Japan are accelerating their offshore wind projects. These emerging markets are demanding specialized offshore wind turbine installation vessels, as they need customized solutions for the specific challenges of their geography and environments.
• Technological Integration for Higher Automation: Offshore wind turbine installation vessels are increasingly incorporating automation and digital technologies to enhance installation efficiency. These innovations include automated cranes, real-time performance monitoring, and data analytics for predictive maintenance. The use of automation reduces the need for human labor and minimizes errors, leading to more efficient operations. As the market grows, technological advancements in automation will continue to improve the overall performance and cost-effectiveness of offshore wind turbine installation vessels.

Current trends in the offshore wind turbine installation vessel industry are promoting substantial growth, as driven by technological, sustainability, and design innovations. The demand for larger, more efficient vessels, combined with the growth of floating wind turbines and the spread of offshore wind farms to emerging markets, is opening up new opportunities for vessel manufacturers. These advancements are molding the future of the offshore wind turbine installation vessel market, setting it up for further growth in the coming years.

Strategic Growth Opportunities in the Offshore Wind Turbine Installation Vessel Market

Offshore wind turbine installation vessel are in the process of a substantial change, being driven by increased demand for clean energy and improved vessel design technologies. The main growth opportunities exist in a number of applications such as utility-scale projects, floating wind turbines, and offshore wind installations in emerging economies. The following section details five main growth opportunities in the offshore wind turbine installation vessel market.

• Utility-Scale Offshore Wind Farms: One of the biggest growth prospects in the offshore wind turbine installation vessel market is the creation of vessels designed for large utility-scale offshore wind farms. Large-scale developments need specialized vessels capable of handling high-capacity turbines and enabling long-duration installation operations in deeper waters. With numerous nations striving to expand their renewable energy capacity, utility-scale offshore wind farms are gaining prominence, and demand for installation vessels that can effectively carry out these large-scale projects is on the rise.
• Floating Wind Turbine Installations: Floating wind turbine technology is a new trend in offshore wind energy, especially in deep waters. The need for dedicated installation vessels for floating wind turbines is on the rise as more nations venture into this technology. The installation process of floating wind farms needs to be different, and installing vessels need to be configured for these unique requirements. As demand increases for floating wind farms, installing vessels to install these complicated projects will be needed more.
• Offshore Wind Development in Emerging Markets: Emerging economies in Asia, North America, and other parts of the world are investing significantly in offshore wind power. As the markets grow, there is increasing demand for installation vessels capable of withstanding the challenges presented by local conditions. These emerging markets offer a major opportunity for installation vessel builders to launch new vessels that will cater to the particular requirements of these markets, such as peculiar geographic conditions and local regulations.
• Digitalization and Technological Innovation: Incorporating advanced digital solutions and automation into offshore wind turbine installation ships presents a prime growth prospect. Automated cranes, real-time monitoring, and predictive maintenance, among other technologies, are increasing the pace, safety, and cost-effectiveness of installations. With further development of such technologies, demand will be increasing for ships fitted with state-of-the-art automation and digital capabilities designed to enhance operating efficiency.
• Sustainability and Environmental Focus: Environmental sustainability is increasingly becoming a priority in the offshore wind turbine installation vessel industry. Governments and businesses alike are under pressure to minimize the carbon footprint of their activities, thus driving demand for eco-friendly technologies in installation vessels. Hybrid, environmentally friendly vessels that run on alternative fuels as well as energy-efficient technologies will remain a central growth opportunity, especially in countries with high environmental regulation standards.

Strategic opportunities for growth in the market for offshore wind turbine installation vessels are fueled by offshore wind project expansions, technology advancements, and a move towards cleaner and more efficient operations. The increasing need for specialized vessels that can manage floating wind turbines, coupled with rising investments in emerging economies, will continue to drive the growth of the market over the next few years.

Offshore Wind Turbine Installation Vessel Market Driver and Challenges

The offshore wind turbine installation vessel market is being affected by several drivers and challenges that are dictating its growth pattern. Some of these drivers and challenges include technological development, economic drivers, regulatory drivers, design challenges, supply chain restrictions, and market competition. Below are the drivers and challenges affecting the market.

The factors responsible for driving the offshore wind turbine installation vessel market include:

1. Technological Advancements: Advances in vessel technology, digitalization, and automation are fueling the offshore wind turbine installation vessel market growth. Emerging developments in vessel capabilities, like larger turbines and floating wind farms, are enhancing installation efficiency and growing the potential of the market. Digital technologies like real-time monitoring and predictive maintenance are optimizing vessel operations, increasing market demand further.

2. Increased Demand for Offshore Wind Power: With nations competing to achieve renewable energy targets and curb carbon emissions, demand for offshore wind power is expanding at a high rate. Installation vessels for offshore wind turbines play a vital role in the effective installation of offshore wind farms, and therefore the demand for vessels is high. Increased growth of offshore wind farms, especially in Europe, Asia, and North America, is driving the market.

3. Government Policies and Incentives: Government policies to encourage offshore wind energy development, including subsidies, tax credits, and renewable energy targets, are promoting investment in offshore wind schemes. These policies are stimulating demand for installation vessels since they allow the quick development of offshore wind capacity. With governments continuing to favor renewable energy, the installation vessel market is anticipated to develop steadily.

4. Emphasis on Sustainability: Environmental and sustainability concerns are increasingly dictating the market for offshore wind turbine installation vessels. With the tightening of environmental regulations, producers are creating environmentally friendly vessels with reduced carbon footprints. The trend is not only aiding in the expansion of the market but also aligning with worldwide efforts to cut down on greenhouse gas emissions and slow climate change.

5. Increased Investment in Emerging Economies: Emerging economies, especially in Asia and North America, are stepping up investments in offshore wind power. These economies offer a huge opportunity for the installation vessel market, as they need vessels that are designed to suit local conditions. As these economies keep on developing, the demand for installation vessels will increase, leading to the overall development of the industry.

Challenges in the offshore wind turbine installation vessel market are:

1. High Capital Investment: Offshore wind turbine installation vessels are capital-intensive in terms of development and operation. The expense of constructing specialist vessels, as well as the maintenance necessary, can act as a deterrent for companies at a smaller scale wishing to penetrate the market. Such a high capital investment threshold can constrain market expansion as well as limit competition.

2. Supply Chain Constraints: Material supply chain and labor constraints, notably skilled labor, may hinder offshore wind turbine installation vessel construction. Delays in the availability of vessels and vessel construction can hamper the on-time delivery of offshore wind installations. Overcoming these supply chain challenges will be key to sustaining the smooth growth of the market for offshore wind turbine installation vessels.

3. Existing Technologies Competition: The offshore wind turbine installation vessel industry is threatened by incumbent technologies, e.g., jack-up rigs and barges, which have served the offshore wind installation process for decades. These incumbent technologies can offer lower initial capital expenditure, thereby making it challenging for new vessels to penetrate. To counter this, vessel builders will need to offer greater efficiency, cost savings, and capability.

The offshore wind turbine installation vessel market is driven by various strong drivers, namely technological developments, increasing offshore wind energy demand, and incentives offered by governments. Nevertheless, such challenges as a high investment amount, supply limitations, and competitiveness of traditional technology need to be overcome in order to sustain long-term growth. In general, the market itself is looking toward growth since all these drivers and challenges tend to develop over time.

List of Offshore Wind Turbine Installation Vessel Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies offshore wind turbine installation vessel companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the offshore wind turbine installation vessel companies profiled in this report include-

• A2SEA
• MPI-Offshore
• Seajacks
• Fred. Olsen Windcarrier
• Geosea
• Van Oord
• Jack-Up Barge
• SEAFOX
• Swire Blue Ocean
• Gaoh Offshore

Offshore Wind Turbine Installation Vessel Market by Segment

The study includes a forecast for the global offshore wind turbine installation vessel market by type, application, and region.

Offshore Wind Turbine Installation Vessel Market by Type [Value from 2019 to 2031]:

• Self-Propelled Jack-Up Vessel
• Normal Jack-Up Vessel
• Heavy Lift Vessel

Offshore Wind Turbine Installation Vessel Market by Application [Value from 2019 to 2031]:

• Onshore Wind
• Offshore Wind

Offshore Wind Turbine Installation Vessel Market by Region [Value from 2019 to 2031]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Offshore Wind Turbine Installation Vessel Market

The market for Offshore wind turbine installation vessel has witnessed significant growth as a result of the increased need for renewable energy and technological advancements in offshore wind technologies. A number of nations, such as the United States, China, Germany, India, and Japan, are heavily committing to offshore wind projects and increasing their installation vessel fleet in response to increased energy needs. These developments are defining the market, with different technological and infrastructural innovations in each country. Below, we discuss recent important developments in the offshore wind turbine installation vessel market in these five countries.

• United States: The United States has developed significantly in offshore wind, especially along the East Coast, where several large-scale offshore wind farms are in development. Recent developments have involved the buildup of U.S. offshore wind installation fleets, with firms investing in dedicated vessels to underpin the development of this sector. Offshore wind commitment from the government, combined with rising federal backing, has continued to spur these developments. The Biden administration's plan to secure 30 gigawatts of offshore wind power through 2030 is likely to fuel high demand for installation vessels over the next few years.
• China: China dominates the world's offshore wind turbine market in capacity and is aggressively building its installation vessel fleet. With a strong emphasis on the renewable energy sector, China has witnessed a significant upsurge in construction of offshore wind farms, encouraged by the evolution of specialized vessels meant for mega-installations. The nation is also spending big on enhancing the efficiency of these ships, with a target of lowering installation costs and enhancing working schedules. China's escalating demand for offshore wind power, coupled with improved installation vessels technology, is likely to make it a market leader.
• Germany: Germany's market for offshore wind turbines and installation ships is already established, making it a major player in the European offshore wind industry. Recent developments in the nation involve greater investments in installation vessels with high capacities that will accommodate the increasing size of future wind turbines. German industry is concentrating on enhancing the environmental integrity of these vessels through the adoption of cleaner technologies and lowering emission levels. With a focus on increasing offshore wind capacity as part of its renewable energy ambitions, Germany is likely to remain a key driver of demand for specialist installation vessels in the European market.
• India: India has been quite interested in the development of offshore wind energy projects, especially along its western coast. The government has launched initiatives to promote offshore wind energy and is actively engaged in developing the required infrastructure, including installation vessels. India's commitment to increasing the size of its renewable energy portfolio has seen co-operations with overseas companies introduce specialized offshore installation ships to market. As the offshore wind sector matures in India, the requirement for effective, value-for-money installation ships will increase, bringing with it an opportunity for development by both indigenous and overseas providers.
• Japan: Japan is advancing offshore wind growth as part of a larger energy transformation strategy. The nation is concentrating on building up its capacity of offshore wind energy, specifically in terms of floating wind turbines that need to be installed with specialized vessels. Japan's vessel technology advancements are oriented towards minimizing the costs and maximizing the efficiency of installation. As part of its strategy focusing on offshore wind power for the attainment of carbon neutrality targets, Japan's demand for offshore wind turbine installation vessels will steadily expand as both local and foreign investors engage with the industry.

Features of the Global Offshore Wind Turbine Installation Vessel Market

Market Size Estimates: Offshore wind turbine installation vessel market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.

Segmentation Analysis: Offshore wind turbine installation vessel market size by type, application, and region in terms of value ($B).

Regional Analysis: Offshore wind turbine installation vessel market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different type, application, and regions for the offshore wind turbine installation vessel market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the offshore wind turbine installation vessel market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the offshore wind turbine installation vessel market by type (self-propelled jack-up vessel, normal jack-up vessel, and heavy lift vessel), application (onshore wind and offshore wind), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Offshore Wind Turbine Installation Vessel Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2019 to 2031

• 3.1. Macroeconomic Trends (2019-2024) and Forecast (2025-2031)
• 3.2. Global Offshore Wind Turbine Installation Vessel Market Trends (2019-2024) and Forecast (2025-2031)
• 3.3: Global Offshore Wind Turbine Installation Vessel Market by Type
  • 3.3.1: Self-Propelled Jack-Up Vessel
  • 3.3.2: Normal Jack-Up Vessel
  • 3.3.3: Heavy Lift Vessel
• 3.4: Global Offshore Wind Turbine Installation Vessel Market by Application
  • 3.4.1: Onshore Wind
  • 3.4.2: Offshore Wind

4. Market Trends and Forecast Analysis by Region from 2019 to 2031

• 4.1: Global Offshore Wind Turbine Installation Vessel Market by Region
• 4.2: North American Offshore Wind Turbine Installation Vessel Market
  • 4.2.1: North American Market by Type: Self-Propelled Jack-Up Vessel, Normal Jack-Up Vessel, and Heavy Lift Vessel
  • 4.2.2: North American Market by Application: Onshore Wind and Offshore Wind
• 4.3: European Offshore Wind Turbine Installation Vessel Market
  • 4.3.1: European Market by Type: Self-Propelled Jack-Up Vessel, Normal Jack-Up Vessel, and Heavy Lift Vessel
  • 4.3.2: European Market by Application: Onshore Wind and Offshore Wind
• 4.4: APAC Offshore Wind Turbine Installation Vessel Market
  • 4.4.1: APAC Market by Type: Self-Propelled Jack-Up Vessel, Normal Jack-Up Vessel, and Heavy Lift Vessel
  • 4.4.2: APAC Market by Application: Onshore Wind and Offshore Wind
• 4.5: ROW Offshore Wind Turbine Installation Vessel Market
  • 4.5.1: ROW Market by Type: Self-Propelled Jack-Up Vessel, Normal Jack-Up Vessel, and Heavy Lift Vessel
  • 4.5.2: ROW Market by Application: Onshore Wind and Offshore Wind

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Offshore Wind Turbine Installation Vessel Market by Type
  • 6.1.2: Growth Opportunities for the Global Offshore Wind Turbine Installation Vessel Market by Application
  • 6.1.3: Growth Opportunities for the Global Offshore Wind Turbine Installation Vessel Market by Region
• 6.2: Emerging Trends in the Global Offshore Wind Turbine Installation Vessel Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Offshore Wind Turbine Installation Vessel Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Offshore Wind Turbine Installation Vessel Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: A2SEA
• 7.2: MPI-Offshore
• 7.3: Seajacks
• 7.4: Fred. Olsen Windcarrier
• 7.5: Geosea
• 7.6: Van Oord
• 7.7: Jack-Up Barge
• 7.8: SEAFOX
• 7.9: Swire Blue Ocean
• 7.10: Gaoh Offshore