航空宇宙用プリプレグ市場レポート：動向、予測、競合分析 (2030年まで)

航空宇宙用プリプレグの動向と予測

世界の航空宇宙用プリプレグ市場の将来は、民間用市場と防衛用市場における機会で有望に見えます。世界の航空宇宙用プリプレグ市場は、2024年から2030年にかけてCAGR 12.3％で成長すると予想されます。この市場の主な促進要因は、軽量材料に対する需要の増加、航空宇宙分野での先端材料に対するニーズの高まり、民間および軍事航空宇宙分野の拡大です。

• Lucintel社の予測によると、繊維の種類別では、炭素繊維の高剛性や顕著な強度対重量比などの特性により、炭素繊維が予測期間中に高い成長を遂げる見込みです。
• 用途別では、運転コストの節約と燃料経済性の向上を目的とした軽量素材へのニーズの高まりから、民間用が高い成長を遂げると予想されます。
• 地域別では、北米が予測期間中に最も高い成長が見込まれます。

航空宇宙用プリプレグ市場の戦略的成長機会

航空宇宙産業が発展するにつれて、航空宇宙用プリプレグ市場における戦略的成長機会が様々な用途で出現しています。これらの機会は、技術の進歩、高性能材料に対する需要の増加、業界のニーズの進化によってもたらされています。主な用途には、民間航空、軍事航空宇宙、宇宙探査、無人航空機（UAV）、回転翼機などがあります。これらの機会を理解することは、利害関係者が市場動向を活用し、イノベーションを推進するのに役立ちます。

• 民間航空：軽量で燃費の良い航空機への需要が、民間航空機用プリプレグの機会を後押ししています。高性能プリプレグは、翼、胴体、内装部品などの部品製造に不可欠であり、全体的な燃料効率と排出量削減に貢献します。プリプレグ材料の革新は、より強く、より軽く、よりコスト効率の高い部品の製造を可能にし、航空機の性能を高め、運用コストを削減します。
• 軍事航空宇宙：軍事航空宇宙分野では、プリプレグは高度な航空機、無人機、ミサイルシステムの開発に不可欠です。過酷な条件に耐える高強度で軽量な材料へのニーズが、この分野の成長を後押ししています。先進プリプレグは、軍事用途の厳しい環境に不可欠な優れた耐久性と性能を提供します。このような先端材料への注目は、次世代防衛技術の開発を支援し、任務の有効性を高めます。
• 宇宙探査：宇宙探査分野では、過酷な宇宙環境に耐える材料が必要とされるため、航空宇宙用プリプレグに大きな機会があります。宇宙船や衛星に使用されるプリプレグは、高い耐熱性と構造的完全性を提供しなければなりません。高温プリプレグと複合材料における革新は、より効率的で信頼性の高い宇宙ミッションを可能にし、衛星技術の進歩と深宇宙探査を支えています。
• 無人航空機（UAV）：商用および防衛用途の両方でUAVの採用が増加しているため、特殊プリプレグの需要が生じています。UAVは、最適な飛行性能と耐久性を達成するために、軽量で高強度の材料を必要とします。プリプレグはUAVの構造部品を強化し、性能を向上させ、運用能力を拡張するための理想的なソリューションを提供します。この動向は、監視、配送サービス、リモートセンシングにおけるUAV使用の増加によって推進されています。
• 回転翼機ヘリコプターや垂直離着陸（VTOL）機を含む回転翼航空機は、性能と安全性を向上させる高度なプリプレグ材料の恩恵を受けています。プリプレグはローターブレード、胴体部品、構造補強材に使用されています。ロータービークラフトにおける燃料効率の改善、軽量化、より大きな操縦性の要求が、この用途におけるプリプレグの成長を促進し、民間および軍用ロータービークラフトの両方の進歩を支えています。

航空宇宙用プリプレグ市場における戦略的成長機会は、民間航空、軍事航空宇宙、宇宙探査、UAV、回転翼機などの用途によってもたらされます。これらの機会は、航空宇宙技術における効率性、耐久性、革新性を高める高性能材料に対する需要の増加を反映しています。これらの用途が進化するにつれて、利害関係者が技術を進歩させ、市場成長を獲得するための貴重な展望がもたらされます。

航空宇宙用プリプレグ市場促進要因・課題

航空宇宙用プリプレグ市場は、技術革新、経済状況、規制要因など様々な市場促進要因・課題によって形成されています。これらの要素は航空宇宙用プリプレグ材料の開発、採用、成長に影響を与えます。これらの要素を特定し分析することは、利害関係者が市場力学に対処し、成功に向けて戦略的に位置づけるのに役立ちます。

航空宇宙用プリプレグ市場を牽引する要因は以下の通り：

• 技術の進歩：改良された樹脂配合や自動化された製造工程など、プリプレグ技術における継続的な進歩が市場成長の原動力となっています。高温プリプレグや高度な硬化方法のような革新は、航空宇宙部品の性能と効率を高めます。これらの技術は生産コストを削減し、材料能力を向上させ、次世代の航空機や宇宙船の開発を支援します。
• 軽量材料の需要：航空宇宙産業は、燃料効率と排出量削減を継続的に推進しており、軽量プリプレグ材料への需要を煽っています。プリプレグは優れた強度対重量比を提供し、これは航空機の性能と運用効率を向上させる上で極めて重要です。この原動力は、軽量化が燃料消費と環境への影響に直接影響する民間航空に特に関連します。
• 航空宇宙産業の成長：新しい航空機計画や宇宙探査活動の増加など、航空宇宙生産の拡大がプリプレグの需要を押し上げています。生産率の上昇と高度な航空宇宙技術のイントロダクションは、厳しい要件を満たすことのできる高性能材料を必要とします。この生産量の増加は、様々な用途における航空宇宙用プリプレグの需要増に直結します。
• 環境と規制の圧力：カーボンフットプリントの削減と持続可能性の向上を求める規制圧力の高まりが、環境に優しいプリプレグの開発を後押ししています。排出量と廃棄物管理の削減を支持する規制は、リサイクル可能でバイオベースのプリプレグ材料の使用を促進します。こうした環境基準の遵守は市場競争力にとって不可欠であり、世界の持続可能性の目標に合致しています。
• 防衛と宇宙への投資：防衛および宇宙探査プロジェクトにおける多額の投資は、先進プリプレグの需要に貢献しています。軍事および宇宙用途では、卓越した耐久性と極限条件への耐性を備えた高性能材料が必要とされます。これらの投資は技術革新を促進し、要求の厳しい航空宇宙環境に合わせた特殊プリプレグの開発を支えています。

航空宇宙用プリプレグ市場の課題は以下の通り：

• 高い製造コスト：航空宇宙用プリプレグの製造には複雑な工程と高い材料費が必要であり、これが市場へのアクセスを制限する可能性があります。高度な製造技術と高品質の材料はコスト上昇の一因となり、様々な用途のプリプレグの値ごろ感に影響を与えます。高性能を維持しながらコスト課題に対処することは、市場拡大にとって極めて重要です。
• サプライチェーンの混乱：航空宇宙用プリプレグ市場は、原材料不足や物流の問題など、サプライチェーンの混乱に関連する課題に直面しています。主要部品の供給中断は生産スケジュールに影響を与え、リードタイムを増加させる可能性があります。安定した効率的なサプライチェーンを確保することは、市場の需要に応え、生産の継続性を維持するために不可欠です。
• 規制遵守：航空宇宙材料に関する複雑な規制環境を乗り切ることは課題です。国際規格や規制を遵守するには、継続的な調整と投資が必要です。プリプレグがさまざまな地域のさまざまな認証要件を満たすようにすることは、時間とコストがかかり、市場参入と拡大の努力に影響を与える可能性があります。

航空宇宙用プリプレグ市場は、技術の進歩、軽量材料の需要、生産の伸び、規制圧力といった重要な促進要因の影響を受けています。しかし、製造コストの高騰、サプライチェーンの混乱、規制遵守などの課題にも対処しなければなりません。これらの要因を理解することは、利害関係者が市場を効果的にナビゲートし、進化する業界力学に適応するのに役立ちます。

目次

第1章 エグゼクティブサマリー

第2章 世界の航空宇宙用プリプレグ市場：市場力学

• イントロダクション、背景、分類
• サプライチェーン
• 業界の促進要因と課題

第3章 市場動向と予測分析 (2018年～2030年)

• マクロ経済動向 (2018～2023年) と予測 (2024～2030年)
• 世界の航空宇宙用プリプレグ市場の動向 (2018～2023年) と予測 (2024～2030年)
• 世界の航空宇宙用プリプレグ市場：繊維の種類別
  • 炭素
  • ガラス
  • その他
• 世界の航空宇宙用プリプレグ市場：樹脂の種類別
  • 熱硬化性
  • 熱可塑性
• 世界の航空宇宙用プリプレグ市場：用途別
  • 民間用
  • 防衛用
  • その他

第4章 地域別の市場動向と予測分析 (2018年～2030年)

• 世界の航空宇宙用プリプレグ市場：地域別
• 北米の航空宇宙用プリプレグ市場
• 欧州の航空宇宙用プリプレグ市場
• アジア太平洋の航空宇宙用プリプレグ市場
• その他地域の航空宇宙用プリプレグ市場

第5章 競合分析

• 製品ポートフォリオ分析
• 運用統合
• ポーターのファイブフォース分析

第6章 成長機会と戦略分析

• 成長機会分析
  • 世界の航空宇宙用プリプレグ市場の成長機会：繊維の種類別
  • 世界の航空宇宙用プリプレグ市場の成長機会：樹脂の種類別
  • 世界の航空宇宙用プリプレグ市場の成長機会：用途別
  • 世界の航空宇宙用プリプレグ市場の成長機会：地域別
• 世界の航空宇宙用プリプレグ市場の新たな動向
• 戦略的分析
  • 新製品の開発
  • 世界の航空宇宙用プリプレグ市場の生産能力拡大
  • 世界の航空宇宙用プリプレグ市場における企業合併・買収 (M&A)、合弁事業
  • 認証とライセンシング

第7章 主要企業のプロファイル

• Hexcel
• Toray Industries
• Park Aerospace
• Gurit
• Mitsubishi Chemical
• C. A. Litzler
• Teijin

Aerospace Prepreg Trends and Forecast

The future of the global aerospace prepreg market looks promising with opportunities in the commercial and defense markets. The global aerospace prepreg market is expected to grow with a CAGR of 12.3% from 2024 to 2030. The major drivers for this market are the increased demand for lightweight materials, the growing need for advanced materials in the aerospace sector, and the expansion of the commercial and military aerospace sectors.

• Lucintel forecasts that, within the fiber type category, carbon is expected to witness higher growth over the forecast period due to properties like high stiffness and remarkable strength-to-weight ratio of carbon fibers.
• Within the application category, the commercial is expected to witness higher growth due to the increasing need for lightweight materials to save operating costs and increase fuel economics.
• In terms of regions, North America is expected to witness the highest growth over the forecast period.

Gain valuable insights for your business decisions with our comprehensive 150+ page report.

Emerging Trends in the Aerospace Prepreg Market

The aerospace prepreg market is reshaping the industry by introducing innovations in materials, manufacturing processes, and applications. These trends reflect a shift towards greater efficiency, sustainability, and performance in aerospace components. Understanding these trends is crucial for stakeholders aiming to stay competitive and meet the evolving demands of the aerospace sector.

• Sustainability and Recycling: There is a growing emphasis on sustainability in the aerospace prepreg market, with increased efforts to develop recyclable and environmentally friendly materials. Companies are focusing on reducing waste and improving the life cycle of prepregs by implementing recycling processes and sustainable manufacturing practices. This trend is driven by regulatory pressures and a push towards greener aerospace solutions, impacting both cost and environmental impact.
• Advanced Manufacturing Techniques: Innovations in manufacturing technologies, such as automated production and digitalization, are transforming the aerospace prepreg market. Techniques like 3D weaving and advanced curing processes are improving the efficiency and precision of prepreg production. These advancements enable the creation of more complex and higher-performance components, contributing to reduced production times and costs.
• High-Performance Materials: The demand for high-performance prepregs is increasing, particularly those that can withstand extreme temperatures and environmental conditions. Developments in high-temperature and ultra-lightweight materials are being driven by the need for enhanced performance in next-generation aircraft and space exploration. These materials offer superior strength-to-weight ratios and durability, crucial for advanced aerospace applications.
• Increased Use in Commercial Aerospace: The commercial aerospace sector is expanding its use of prepregs due to their benefits in reducing weight and improving fuel efficiency. The shift towards more fuel-efficient aircraft and the rise of new commercial aircraft programs are driving demand for advanced prepregs. This trend is leading to more widespread adoption and integration of prepreg materials in commercial aerospace applications.
• Regional Market Growth: The aerospace prepreg market is experiencing regional growth, with significant developments in countries like China, India, and Germany. These regions are investing in local production capabilities and technology advancements to meet the increasing demand for prepregs. Regional growth is influenced by factors such as government support, defense contracts, and the expansion of aerospace manufacturing infrastructure.

These emerging trends are reshaping the aerospace prepreg market by enhancing material performance, manufacturing efficiency, and environmental sustainability. As the industry continues to evolve, staying abreast of these trends will be crucial for companies to maintain competitiveness and meet the changing demands of the aerospace sector.

Recent Developments in the Aerospace Prepreg Market

The aerospace prepreg market is undergoing notable transformations due to advancements in technology and materials. Key developments are influencing how prepregs are manufactured, utilized, and integrated into aerospace applications. Understanding these developments is essential for stakeholders aiming to navigate the evolving landscape of aerospace composites.

• Introduction of High-Temperature Prepregs: New high-temperature prepregs are being developed to meet the demands of next-generation aerospace applications. These materials offer enhanced performance in extreme conditions, such as high-speed aircraft and space exploration. The introduction of these prepregs improves the durability and efficiency of aerospace components, contributing to better performance and reliability.
• Advancements in Automated Manufacturing: Automated manufacturing technologies are being increasingly adopted in the production of aerospace prepregs. Automation, including robotics and advanced curing processes, is enhancing the precision and efficiency of prepreg production. This shift reduces production time, lowers costs, and improves the consistency and quality of the final products.
• Focus on Sustainable Materials: There is a growing focus on developing sustainable prepreg materials that reduce environmental impact. Innovations in recyclable and bio-based prepregs are being explored to address sustainability concerns. These materials aim to reduce waste and promote a circular economy in aerospace manufacturing, aligning with global environmental goals.
• Expansion of Regional Production Capabilities: The expansion of aerospace prepreg production facilities in key regions such as China and India is driving market growth. Investments in local manufacturing capabilities are addressing increasing demand and reducing supply chain dependencies. This regional growth supports the development of localized aerospace industries and enhances global market dynamics.
• Integration of Advanced Simulation Techniques: Advanced simulation and modeling techniques are being integrated into the prepreg development process. These technologies enable more accurate predictions of material performance and behavior, leading to optimized design and manufacturing processes. The integration of simulation tools enhances the development of high-performance prepregs and accelerates time-to-market.

Recent developments in the aerospace prepreg market are driving innovation and growth across various dimensions, including material performance, manufacturing efficiency, and regional capabilities. These advancements are reshaping the industry and setting the stage for future progress in aerospace composite technologies.

Strategic Growth Opportunities for Aerospace Prepreg Market

As the aerospace industry evolves, strategic growth opportunities in the aerospace prepreg market are emerging across various applications. These opportunities are driven by advancements in technology, increasing demand for high-performance materials, and evolving industry needs. Key applications include commercial aviation, military aerospace, space exploration, unmanned aerial vehicles (UAVs), and rotorcraft. Understanding these opportunities can help stakeholders capitalize on market trends and drive innovation.

• Commercial Aviation: The demand for lightweight and fuel-efficient aircraft is boosting opportunities in commercial aviation prepregs. High-performance prepregs are critical for manufacturing components like wings, fuselage, and interior parts, which contribute to overall fuel efficiency and reduced emissions. Innovations in prepreg materials enable the production of stronger, lighter, and more cost-effective parts, enhancing aircraft performance and reducing operational costs.
• Military Aerospace: In military aerospace, prepregs are crucial for developing advanced aircraft, drones, and missile systems. The need for high-strength, lightweight materials that can withstand extreme conditions drives growth in this sector. Advanced prepregs provide superior durability and performance, essential for the demanding environments of military applications. This focus on advanced materials supports the development of next-generation defense technologies and enhances mission effectiveness.
• Space Exploration: The space exploration sector presents significant opportunities for aerospace prepregs due to the need for materials that can endure harsh space conditions. Prepregs used in spacecraft and satellites must offer high thermal resistance and structural integrity. Innovations in high-temperature prepregs and composites are enabling more efficient and reliable space missions, supporting advancements in satellite technology, and deep-space exploration.
• Unmanned Aerial Vehicles (UAVs): The growing adoption of UAVs for both commercial and defense applications is creating a demand for specialized prepregs. UAVs require lightweight, high-strength materials to achieve optimal flight performance and durability. Prepregs offer the ideal solution for enhancing UAV structural components, improving performance, and extending operational capabilities. This trend is driven by increased UAV use in surveillance, delivery services, and remote sensing.
• Rotorcraft: Rotorcraft, including helicopters and vertical takeoff and landing (VTOL) aircraft, benefit from advanced prepreg materials that enhance performance and safety. Prepregs are used in rotor blades, fuselage components, and structural reinforcements. The demand for improved fuel efficiency reduced weight, and greater maneuverability in rotorcraft drives the growth of prepregs in this application, supporting advancements in both commercial and military rotorcraft.

Strategic growth opportunities in the aerospace prepreg market are driven by applications across commercial aviation, military aerospace, space exploration, UAVs, and rotorcraft. These opportunities reflect the increasing demand for high-performance materials that enhance efficiency, durability, and innovation in aerospace technologies. As these applications evolve, they present valuable prospects for stakeholders to advance their technologies and capture market growth.

Aerospace Prepreg Market Driver and Challenges

The aerospace prepreg market is shaped by a variety of drivers and challenges, including technological innovations, economic conditions, and regulatory factors. These elements impact the development, adoption, and growth of aerospace prepreg materials. Identifying and analyzing these factors helps stakeholders address market dynamics and strategically position themselves for success.

The factors responsible for driving the aerospace prepreg market include:

• Technological Advancements: Ongoing advancements in prepreg technology, such as improved resin formulations and automated manufacturing processes, are driving market growth. Innovations like high-temperature prepregs and advanced curing methods enhance the performance and efficiency of aerospace components. These technologies reduce production costs and increase material capabilities, supporting the development of next-generation aircraft and space vehicles.
• Demand for Lightweight Materials: The aerospace industry's continuous push for fuel efficiency and reduced emissions fuels demand for lightweight prepreg materials. Prepregs offer superior strength-to-weight ratios, which are crucial for improving aircraft performance and operational efficiency. This driver is especially relevant for commercial aviation, where weight reduction directly impacts fuel consumption and environmental impact.
• Growth in Aerospace Production: The expansion of aerospace production, including new aircraft programs and increased space exploration activities, boosts the demand for prepregs. Rising production rates and the introduction of advanced aerospace technologies necessitate high-performance materials that can meet stringent requirements. This production growth directly translates to higher demand for aerospace prepregs across various applications.
• Environmental and Regulatory Pressures: Increasing regulatory pressures for reducing carbon footprints and improving sustainability drive the development of eco-friendly prepregs. Regulations favoring reduced emissions and waste management promote the use of recyclable and bio-based prepreg materials. Compliance with these environmental standards is essential for market competitiveness and aligns with global sustainability goals.
• Defense and Space Investments: Significant investments in defense and space exploration projects contribute to the demand for advanced prepregs. Military and space applications require high-performance materials with exceptional durability and resistance to extreme conditions. These investments drive innovation and support the development of specialized prepregs tailored for demanding aerospace environments.

Challenges in the aerospace prepreg market are:

• High Manufacturing Costs: The production of aerospace prepregs involves complex processes and high material costs, which can limit market accessibility. Advanced manufacturing techniques and high-quality materials contribute to elevated costs, impacting the affordability of prepregs for various applications. Addressing cost challenges while maintaining high performance is crucial for market expansion.
• Supply Chain Disruptions: The aerospace prepreg market faces challenges related to supply chain disruptions, including raw material shortages and logistical issues. Disruptions in the supply of key components can affect production schedules and increase lead times. Ensuring a stable and efficient supply chain is essential for meeting market demands and maintaining production continuity.
• Regulatory Compliance: Navigating the complex regulatory environment for aerospace materials presents a challenge. Compliance with international standards and regulations requires ongoing adjustments and investments. Ensuring that prepregs meet various certification requirements across different regions can be time-consuming and costly, impacting market entry and expansion efforts.

The aerospace prepreg market is influenced by significant drivers such as technological advancements, demand for lightweight materials, growth in production, and regulatory pressures. However, challenges including high manufacturing costs, supply chain disruptions, and regulatory compliance must be addressed. Understanding these factors helps stakeholders navigate the market effectively and adapt to evolving industry dynamics.

List of Aerospace Prepreg Companies

Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. Through these strategies aerospace prepreg companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the aerospace prepreg companies profiled in this report include-

• Hexcel
• Toray Industries
• Park Aerospace
• Gurit
• Mitsubishi Chemical
• C. A. Litzler
• Teijin

Aerospace Prepreg by Segment

The study includes a forecast for the global aerospace prepreg by fiber type, resin type, application, and region.

Aerospace Prepreg Market by Fiber Type [Analysis by Value from 2018 to 2030]:

• Carbon
• Glass
• Others

Aerospace Prepreg Market by Resin Type [Analysis by Value from 2018 to 2030]:

• Thermoset
• Thermoplastic

Aerospace Prepreg Market by Application [Analysis by Value from 2018 to 2030]:

• Commercial
• Defense
• Others

Aerospace Prepreg Market by Region [Analysis by Value from 2018 to 2030]:

• North America
• Europe
• Asia Pacific
• The Rest of the World

Country Wise Outlook for the Aerospace Prepreg Market

The aerospace industry continues to advance, and the demand for high-performance materials, including prepregs, is growing. Prepregs-pre-impregnated composite fibers used in aerospace applications-offer significant advantages such as reduced weight and enhanced strength. Recent developments in the aerospace prepreg market reflect a shift towards innovative materials, improved processing techniques, and evolving global demands. Key developments include advancements in manufacturing technologies, shifts in major markets, and the rise of new applications within the industry.

• United States: In the United States, recent advancements in aerospace prepregs include significant investments in advanced manufacturing technologies and sustainable materials. Companies are focusing on developing high-temperature prepregs to meet the needs of next-generation aircraft and space exploration. Additionally, there is a strong push towards recycling and reusing prepreg materials to address environmental concerns. The U.S. market is also benefiting from government initiatives and defense contracts that drive innovation and increase demand for high-performance composites.
• China: China has seen rapid growth in its aerospace prepreg market, driven by increasing domestic production capabilities and government-backed aerospace programs. The country's emphasis on developing advanced prepreg technologies and expanding its supply chain infrastructure is reshaping the industry. Chinese companies are making strides in producing prepregs with better mechanical properties and cost efficiency. This growth is supported by both military and commercial aerospace applications, as well as significant investments in research and development.
• Germany: Germany remains a leader in aerospace prepreg technology, with a focus on high-quality composites and innovative manufacturing processes. Recent developments include advancements in automated production techniques and improved prepreg formulations for greater efficiency and performance. Germany's aerospace sector is leveraging its strong engineering capabilities to drive progress in prepreg technology, supported by collaborations between industry leaders and research institutions. This focus enhances the country's position as a key player in the global aerospace prepreg market.
• India: The Indian aerospace prepreg market is evolving with increased investment in aerospace infrastructure and technology development. The country is focusing on developing indigenous prepreg materials to support its growing aerospace industry. Efforts are being made to enhance the performance and cost-effectiveness of prepregs, catering to both commercial and defense applications. India's aerospace sector is also benefiting from collaborations with international companies, which are helping to integrate advanced prepreg technologies and expand market presence.
• Japan: Japan is advancing its aerospace prepreg market through innovations in lightweight and high-strength materials. Recent developments include progress in prepreg technology for both commercial and military aerospace applications. Japanese companies are investing in research to improve the thermal and mechanical properties of prepregs, and are increasingly focusing on environmental sustainability.

Features of the Global Aerospace Prepreg Market

Market Size Estimates: Aerospace prepreg market size estimation in terms of value ($B).

Trend and Forecast Analysis: Market trends (2018 to 2023) and forecast (2024 to 2030) by various segments and regions.

Segmentation Analysis: Aerospace prepreg market size by fiber type, resin type, application, and region in terms of value ($B).

Regional Analysis: Aerospace prepreg market breakdown by North America, Europe, Asia Pacific, and Rest of the World.

Growth Opportunities: Analysis of growth opportunities in different fiber types, resin types, applications, and regions for the aerospace prepreg market.

Strategic Analysis: This includes M&A, new product development, and competitive landscape of the aerospace prepreg market.

Analysis of competitive intensity of the industry based on Porter's Five Forces model.

If you are looking to expand your business in this market or adjacent markets, then contact us. We have done hundreds of strategic consulting projects in market entry, opportunity screening, due diligence, supply chain analysis, M & A, and more.

This report answers following 11 key questions:

• Q.1. What are some of the most promising, high-growth opportunities for the aerospace prepreg market by fiber type (carbon, glass, and others), resin type (thermoset and thermoplastic), application (commercial, defense, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
• Q.2. Which segments will grow at a faster pace and why?
• Q.3. Which region will grow at a faster pace and why?
• Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
• Q.5. What are the business risks and competitive threats in this market?
• Q.6. What are the emerging trends in this market and the reasons behind them?
• Q.7. What are some of the changing demands of customers in the market?
• Q.8. What are the new developments in the market? Which companies are leading these developments?
• Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
• Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
• Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?

Table of Contents

1. Executive Summary

2. Global Aerospace Prepreg Market : Market Dynamics

• 2.1: Introduction, Background, and Classifications
• 2.2: Supply Chain
• 2.3: Industry Drivers and Challenges

3. Market Trends and Forecast Analysis from 2018 to 2030

• 3.1. Macroeconomic Trends (2018-2023) and Forecast (2024-2030)
• 3.2. Global Aerospace Prepreg Market Trends (2018-2023) and Forecast (2024-2030)
• 3.3: Global Aerospace Prepreg Market by Fiber Type
  • 3.3.1: Carbon
  • 3.3.2: Glass
  • 3.3.3: Others
• 3.4: Global Aerospace Prepreg Market by Resin Type
  • 3.4.1: Thermoset
  • 3.4.2: Thermoplastic
• 3.5: Global Aerospace Prepreg Market by Application
  • 3.5.1: Commercial
  • 3.5.2: Defense
  • 3.5.3: Others

4. Market Trends and Forecast Analysis by Region from 2018 to 2030

• 4.1: Global Aerospace Prepreg Market by Region
• 4.2: North American Aerospace Prepreg Market
  • 4.2.1: North American Market by Fiber Type: Carbon, Glass, and Others
  • 4.2.2: North American Market by Application: Commercial, Defense, and Others
• 4.3: European Aerospace Prepreg Market
  • 4.3.1: European Market by Fiber Type: Carbon, Glass, and Others
  • 4.3.2: European Market by Application: Commercial, Defense, and Others
• 4.4: APAC Aerospace Prepreg Market
  • 4.4.1: APAC Market by Fiber Type: Carbon, Glass, and Others
  • 4.4.2: APAC Market by Application: Commercial, Defense, and Others
• 4.5: ROW Aerospace Prepreg Market
  • 4.5.1: ROW Market by Fiber Type: Carbon, Glass, and Others
  • 4.5.2: ROW Market by Application: Commercial, Defense, and Others

5. Competitor Analysis

• 5.1: Product Portfolio Analysis
• 5.2: Operational Integration
• 5.3: Porter's Five Forces Analysis

6. Growth Opportunities and Strategic Analysis

• 6.1: Growth Opportunity Analysis
  • 6.1.1: Growth Opportunities for the Global Aerospace Prepreg Market by Fiber Type
  • 6.1.2: Growth Opportunities for the Global Aerospace Prepreg Market by Resin Type
  • 6.1.3: Growth Opportunities for the Global Aerospace Prepreg Market by Application
  • 6.1.4: Growth Opportunities for the Global Aerospace Prepreg Market by Region
• 6.2: Emerging Trends in the Global Aerospace Prepreg Market
• 6.3: Strategic Analysis
  • 6.3.1: New Product Development
  • 6.3.2: Capacity Expansion of the Global Aerospace Prepreg Market
  • 6.3.3: Mergers, Acquisitions, and Joint Ventures in the Global Aerospace Prepreg Market
  • 6.3.4: Certification and Licensing

7. Company Profiles of Leading Players

• 7.1: Hexcel
• 7.2: Toray Industries
• 7.3: Park Aerospace
• 7.4: Gurit
• 7.5: Mitsubishi Chemical
• 7.6: C. A. Litzler
• 7.7: Teijin