市場調査レポート
商品コード
1464915
商用車用シフターシャフト市場:タイプ別、用途別-2024-2030年の世界予測Commercial Vehicle Shifter Shaft Market by Type (Electronic Lever, Knob Type, Push-button), Application (Heavy Commercial Vehicle, Light Commercial Vehicle) - Global Forecast 2024-2030 |
● お客様のご希望に応じて、既存データの加工や未掲載情報(例:国別セグメント)の追加などの対応が可能です。 詳細はお問い合わせください。
商用車用シフターシャフト市場:タイプ別、用途別-2024-2030年の世界予測 |
出版日: 2024年04月17日
発行: 360iResearch
ページ情報: 英文 193 Pages
納期: 即日から翌営業日
|
商用車用シフターシャフト市場規模は、2023年に125億8,000万米ドルと推定され、2024年には133億4,000万米ドルに達し、CAGR 6.50%で2030年には195億6,000万米ドルに達すると予測されています。
商用車用シフターシャフトは、商用車のギアボックス内の基本部品であり、ギアチェンジのメカニズムにおいて重要な役割を果たしています。ギアシフトレバーとトランスミッションをつなぎ、 促進要因がスムーズにギアを切り替えられるようにします。この部品は、主に貨物や旅客の輸送に使用されるトラック、バス、バンなどの商用車の性能、効率、安全性にとって極めて重要です。世界のeコマース活動の急激な増加により、物流・輸送サービスに対する需要の増加が必要とされています。この成長は、商用車に対するニーズの高まりに直結するため、これらの車両に使用されるシフターシャフトの需要を牽引しています。可処分所得の増加により、世界中で車両や自動車の所有率が高まっており、商用車用シフターシャフトの展開が促進されています。しかし、商用車用シフターシャフトをさまざまなタイプの車両に組み込むことは、部品の普及にハードルをもたらす可能性があります。シフターシャフトの高い耐久性と信頼性を確保することは、性能上の問題や技術的な不具合が発生する可能性があるため、メーカーにとって依然として技術的な課題となっています。主要企業は、商用車用シフターシャフトの設計、製造、性能を改善するための進歩を模索しています。電気自動車(EV)への世界のシフトは、電気商用車専用に設計された革新的なシフターシャフトの開発と統合に新たな機会をもたらします。これらの車両は、従来の車両とは異なるトランスミッションシステム要件を備えています。
主な市場の統計 | |
---|---|
基準年[2023] | 125億8,000万米ドル |
予測年[2024] | 133億4,000万米ドル |
予測年 [2030] | 195億6,000万米ドル |
CAGR(%) | 6.50% |
タイプノブタイプの機能と性能を向上させるための継続的な進歩
商用車用シフターシャフトは、商用車のギアボックス内の基本部品で、ギアチェンジのメカニズムにおいて極めて重要な役割を果たします。ギアシフトレバーとトランスミッションをつなぎ、 促進要因がスムーズにギアチェンジできるようにします。この部品は、主に貨物や旅客の輸送に使用されるトラック、バス、バンなどの商用車の性能、効率、安全性にとって極めて重要です。世界のeコマース活動の急激な増加により、物流・輸送サービスに対する需要の増加が必要とされています。この成長は、商用車に対するニーズの高まりに直結するため、これらの車両に使用されるシフターシャフトの需要を牽引しています。可処分所得の増加により、世界中で車両や自動車の所有率が高まっており、商用車用シフターシャフトの展開が促進されています。しかし、商用車用シフターシャフトをさまざまなタイプの車両に組み込むことは、部品の普及にハードルをもたらす可能性があります。シフターシャフトの高い耐久性と信頼性を確保することは、性能上の問題や技術的な不具合が発生する可能性があるため、メーカーにとって依然として技術的な課題となっています。主要企業は、商用車用シフターシャフトの設計、製造、性能を改善するための進歩を模索しています。電気自動車(EV)への世界のシフトは、電気商用車専用に設計された革新的なシフターシャフトの開発と統合に新たな機会をもたらします。これらの車両は、従来の車両とは異なるトランスミッションシステムを必要とします。
アプリケーション複雑なトランスミッションシステムと大型化により、大型商用車に採用され始めた商用車用シフターシャフト
電子レバーは、ギアシフトに対する現代的なアプローチです。従来の機械的な連結ではなく、電子信号に基づいて作動します。 促進要因がレバーを動かすと、トランスミッションシステムに電子信号が送られ、ギアチェンジが行われます。このタイプはギア間の移行がスムーズで、正確な制御により一般的に燃費が向上します。ノブ式シフターは、商用車を含む多くの車両で採用されている伝統的な変速方法です。ギアノブとトランスミッションの間に物理的な連結があります。 促進要因はノブを各ギアの指定位置に動かして手動で変速します。このタイプはシンプルで信頼性が高いことで知られています。 促進要因は変速プロセスを直接コントロールすることができ、さまざまな走行条件下で有利に働く。プッシュボタンシフターシャフトは、商用車の分野では比較的新しい技術革新です。従来のレバーやノブに代わって、特定のギアに割り当てられた一連のボタンが装備されています。このシステムは非常に直感的で、車両のダッシュボードやセンターコンソールのスペースを節約します。また、最小限の力で簡単にギアを切り替えることができます。プッシュボタンシステムは通常、ギアチェンジを電子信号に頼るが、効率性と摩耗の低減という同様の利点を提供します。
地域別インサイト
南北アメリカ、特に米国とカナダでは、商用車(CV)セクターが経済の重要な構成要素となっています。これらの国々における商用車用シフターシャフトの需要は、広大な地域と長距離を移動する貨物の必要性によって必要とされる、強力なロジスティクスと輸送部門によって牽引されています。これらの地域の顧客の購買行動は、自動車の寿命と効率を保証する堅牢で信頼性の高い部品を好む傾向にあります。南北アメリカにおける最近の投資は、シフターシャフトの耐久性と性能を向上させるために、製造工程を強化し、先端材料を取り入れることに重点を置いています。欧州連合(EU)では、自動車の排出ガスと安全性に関する厳しい規制基準が商用車用シフターシャフト市場の舵取りをしています。イノベーションと、カーボンフットプリントの削減に貢献する新技術の採用が重視されています。EUの顧客は環境への影響を強く意識しており、メーカーは環境に優しくエネルギー効率の高い部品の研究開発に投資しています。APACは、中国、日本、インドを中心に急速に成長している地域です。APACでは、広大な製造能力と、拡大する物流ネットワークと結びついた内需が市場拡大の原動力となっています。これらの地域の需要の特徴は、販売量が多く、費用対効果が高く信頼性の高い部品が好まれることです。
FPNVポジショニング・マトリックス
FPNVポジショニングマトリックスは商用車用シフターシャフト市場の評価において極めて重要です。事業戦略と製品満足度に関連する主要指標を調査し、ベンダーの包括的な評価を提供します。この綿密な分析により、ユーザーは各自の要件に沿った十分な情報に基づいた意思決定を行うことができます。評価に基づき、ベンダーは成功の度合いが異なる4つの象限に分類されます:フォアフロント(F)、パスファインダー(P)、ニッチ(N)、バイタル(V)です。
市場シェア分析
市場シェア分析は、商用車用シフターシャフト市場におけるベンダーの現状について、洞察に満ちた詳細な調査を提供する包括的なツールです。全体的な収益、顧客基盤、その他の主要指標についてベンダーの貢献度を綿密に比較・分析することで、企業の業績や市場シェア争いの際に直面する課題について理解を深めることができます。さらに、この分析により、調査対象基準年に観察された蓄積、断片化の優位性、合併の特徴などの要因を含む、この分野の競合特性に関する貴重な考察が得られます。このような詳細レベルの拡大により、ベンダーはより多くの情報に基づいた意思決定を行い、市場で競争優位に立つための効果的な戦略を考案することができます。
1.市場の浸透度:主要企業が提供する市場に関する包括的な情報を提示しています。
2.市場の開拓度:有利な新興市場を深く掘り下げ、成熟市場セグメントにおける浸透度を分析しています。
3.市場の多様化:新製品の発売、未開拓の地域、最近の開発、投資に関する詳細な情報を提供します。
4.競合の評価と情報:市場シェア、戦略、製品、認証、規制状況、特許状況、主要企業の製造能力などを網羅的に評価します。
5.製品開発およびイノベーション:将来の技術、研究開発活動、画期的な製品開発に関する知的洞察を提供します。
1.商用車用シフターシャフト市場の市場規模および予測は?
2.商用車用シフターシャフト市場の予測期間中に投資を検討すべき製品、セグメント、用途、分野は何か?
3.商用車用シフターシャフト市場の技術動向と規制枠組みは?
4.商用車用シフターシャフト市場における主要ベンダーの市場シェアは?
5.商用車用シフターシャフト市場への参入に適した形態や戦略的手段は?
[193 Pages Report] The Commercial Vehicle Shifter Shaft Market size was estimated at USD 12.58 billion in 2023 and expected to reach USD 13.34 billion in 2024, at a CAGR 6.50% to reach USD 19.56 billion by 2030.
A commercial vehicle shifter shaft is a fundamental component within the gearbox of a commercial vehicle that plays a critical role in the mechanism of changing gears. It connects the gear shift lever to the transmission, allowing the driver to switch between gears smoothly. This component is crucial for the performance, efficiency, and safety of commercial vehicles, including trucks, buses, and vans that are primarily used for transporting goods or passengers. The exponential rise in e-commerce activities globally has necessitated an increased demand for logistics and transportation services. This growth directly translates into a higher need for commercial vehicles, thereby driving the demand for shifter shafts used in these vehicles. The rising disposable incomes have led to greater ownership of vehicle fleets and automobiles across the world, driving the deployment of commercial vehicle shifter shafts. However, integrating the commercial vehicle shifter shaft in different types of vehicles can pose hurdles to the widespread adoption of the components. Ensuring the high durability and reliability of shifter shafts remains a technical challenge for manufacturers, owing to the possibility of performance issues and technical failures. Key players are exploring advancements to improve the design, fabrication, and performance of commercial vehicle shifter shafts. The global shift towards electric vehicles (EVs) opens up new opportunities for the development and integration of innovative shifter shafts designed explicitly for electric commercial vehicles. These vehicles have different transmission system requirements compared to traditional vehicles.
KEY MARKET STATISTICS | |
---|---|
Base Year [2023] | USD 12.58 billion |
Estimated Year [2024] | USD 13.34 billion |
Forecast Year [2030] | USD 19.56 billion |
CAGR (%) | 6.50% |
Type: Ongoing advancements to improve the functionality and performance of knob type
A commercial vehicle shifter shaft is a fundamental component within the gearbox of a commercial vehicle that plays a pivotal role in the mechanism of changing gears. It connects the gear shift lever to the transmission, allowing the driver to switch between gears smoothly. This component is crucial for the performance, efficiency, and safety of commercial vehicles, including trucks, buses, and vans that are primarily used for transporting goods or passengers. The exponential rise in e-commerce activities globally has necessitated an increased demand for logistics and transportation services. This growth directly translates into a higher need for commercial vehicles, thereby driving the demand for shifter shafts used in these vehicles. The rising disposable incomes have led to greater ownership of vehicle fleets and automobiles across the world, driving the deployment of commercial vehicle shifter shafts. However, integrating the commercial vehicle shifter shaft in different types of vehicles can pose hurdles to the widespread adoption of the components. Ensuring the high durability and reliability of shifter shafts remains a technical challenge for manufacturers, owing to the possibility of performance issues and technical failures. Key players are exploring advancements to improve the design, fabrication, and performance of commercial vehicle shifter shafts. The global shift towards electric vehicles (EVs) opens up new opportunities for the development and integration of innovative shifter shafts designed explicitly for electric commercial vehicles. These vehicles have different transmission system requirements compared to traditional vehicles.
Application: Emerging adoption of commercial vehicle shifter shafts in heavy commercial vehicles owing to their complex transmission systems and larger size
The electronic lever represents a modern approach to gear shifting. It operates based on electronic signals rather than the traditional mechanical linkage. When a driver moves the lever, it sends an electronic signal to the vehicle's transmission system to change gears. This type offers a smoother transition between gears and typically provides better fuel efficiency due to its precise control. The knob-type shifter is the traditional method of gear shifting employed in many vehicles, including commercial ones. It involves a physical linkage between the gear knob and the transmission. The driver manually shifts gears by moving the knob into the designated positions for each gear. This type is known for its simplicity and reliability. It allows drivers direct control over the gear-shifting process, which can be advantageous in various driving conditions. Push-button shifter shafts are a relatively new innovation in the field of commercial vehicles. They replace the traditional lever or knob with a series of buttons, each assigned to a specific gear. This system is highly intuitive and saves space on the vehicle's dashboard or center console. It also allows for easier transitions between gears with minimal effort. The push-button system typically relies on electronic signals to change gears, offering similar benefits of efficiency and reduced wear.
Regional Insights
In the Americas, especially in the United States and Canada, the commercial vehicle (CV) sector is a critical component of the economy. The demand for commercial vehicle shifter shafts in these countries is driven by a strong logistics and transportation sector necessitated by the vast geographic areas and the need to move goods across long distances. Customer purchasing behavior in these regions tends toward robust, reliable components that ensure the longevity and efficiency of vehicles. Recent investments in the Americas have focused on enhancing manufacturing processes and incorporating advanced materials to improve the durability and performance of shifter shafts. In the European Union, stringent regulatory standards on vehicle emissions and safety have steered the commercial vehicle shifter shaft market. The emphasis is on innovation and the adoption of new technologies that contribute to reducing carbon footprints. EU customers are highly conscious of environmental impacts, propelling manufacturers to invest in research and development of eco-friendly and energy-efficient components. APAC is a rapidly growing landscape for commercial vehicle shifter shafts, with China, Japan, and India being key contributors. In APAC, the market expansion is powered by vast manufacturing capabilities and the domestic demand linked to its widening logistics network. The demand in these regions is characterized by a high volume of sales, with a preference for cost-effective and reliable components.
FPNV Positioning Matrix
The FPNV Positioning Matrix is pivotal in evaluating the Commercial Vehicle Shifter Shaft Market. It offers a comprehensive assessment of vendors, examining key metrics related to Business Strategy and Product Satisfaction. This in-depth analysis empowers users to make well-informed decisions aligned with their requirements. Based on the evaluation, the vendors are then categorized into four distinct quadrants representing varying levels of success: Forefront (F), Pathfinder (P), Niche (N), or Vital (V).
Market Share Analysis
The Market Share Analysis is a comprehensive tool that provides an insightful and in-depth examination of the current state of vendors in the Commercial Vehicle Shifter Shaft Market. By meticulously comparing and analyzing vendor contributions in terms of overall revenue, customer base, and other key metrics, we can offer companies a greater understanding of their performance and the challenges they face when competing for market share. Additionally, this analysis provides valuable insights into the competitive nature of the sector, including factors such as accumulation, fragmentation dominance, and amalgamation traits observed over the base year period studied. With this expanded level of detail, vendors can make more informed decisions and devise effective strategies to gain a competitive edge in the market.
Key Company Profiles
The report delves into recent significant developments in the Commercial Vehicle Shifter Shaft Market, highlighting leading vendors and their innovative profiles. These include AISIN CORPORATION, Allison Transmission, Inc., BorgWarner Inc., Cummins Inc., DENSO Corporation, DURA-SHILOH, Eaton Corporation plc, Fiat Chrysler Automobiles N.V., Ford Motor Company, General Motors Company, GKN Automotive Limited by Melrose Industries PLC, JTEKT Corporation, Knorr-Bremse AG, Magna International Inc., MAHLE Powertrain Limited., Onassis Auto Limited, Panorama Automotive Industries Pvt.Ltd., Robert Bosch GmbH, Schaeffler AG, Toyota Motor Corporation, TREMEC by Kuo, SAB de CV, Wheel Movers, and ZF Friedrichshafen AG.
Market Segmentation & Coverage
1. Market Penetration: It presents comprehensive information on the market provided by key players.
2. Market Development: It delves deep into lucrative emerging markets and analyzes the penetration across mature market segments.
3. Market Diversification: It provides detailed information on new product launches, untapped geographic regions, recent developments, and investments.
4. Competitive Assessment & Intelligence: It conducts an exhaustive assessment of market shares, strategies, products, certifications, regulatory approvals, patent landscape, and manufacturing capabilities of the leading players.
5. Product Development & Innovation: It offers intelligent insights on future technologies, R&D activities, and breakthrough product developments.
1. What is the market size and forecast of the Commercial Vehicle Shifter Shaft Market?
2. Which products, segments, applications, and areas should one consider investing in over the forecast period in the Commercial Vehicle Shifter Shaft Market?
3. What are the technology trends and regulatory frameworks in the Commercial Vehicle Shifter Shaft Market?
4. What is the market share of the leading vendors in the Commercial Vehicle Shifter Shaft Market?
5. Which modes and strategic moves are suitable for entering the Commercial Vehicle Shifter Shaft Market?