市場調査レポート
商品コード
1470542
風力タービン用ギアボックス市場:容量、タイプ、展開別- 世界予測2024-2030年Wind Turbine Gearbox Market by Capacity (1.5 MW-3MW, Over 3MW, Upto 1.5 MW), Type (Main Gear Box, Yaw Gear Box), Deployment - Global Forecast 2024-2030 |
● お客様のご希望に応じて、既存データの加工や未掲載情報(例:国別セグメント)の追加などの対応が可能です。 詳細はお問い合わせください。
風力タービン用ギアボックス市場:容量、タイプ、展開別- 世界予測2024-2030年 |
出版日: 2024年04月17日
発行: 360iResearch
ページ情報: 英文 198 Pages
納期: 即日から翌営業日
|
風力タービン用ギアボックス市場規模は、2023年に180億9,000万米ドルと推定され、2024年には191億6,000万米ドルに達し、CAGR 6.11%で2030年には274億1,000万米ドルに達すると予測されています。
風力タービン用ギアボックスは風力タービンの重要な部品であり、ブレードからの回転エネルギーを使用可能な電力に変換する役割を担っています。再生可能エネルギー発電に対する需要の増加や、風力発電プロジェクトに対する政府の取り組みにより、市場は成長を遂げています。しかし、風力タービン用ギアボックスの故障や複雑な設計に関する懸念が業界の課題となっており、現在進行中のギアボックス用ベアリングの技術革新は、これらの問題に対処することを目的としています。メーカーもまた、高い性能と信頼性を維持しながら、風力タービン用ギアボックスの設計を簡素化することに取り組んでいます。風力発電プロジェクトの資金調達と投資は今後数年で増加すると予想され、風力タービン用ギアボックス市場の成長を後押しします。
主な市場の統計 | |
---|---|
基準年[2023] | 180億9,000万米ドル |
予測年[2024] | 191億6,000万米ドル |
予測年 [2030] | 274億1,000万米ドル |
CAGR(%) | 6.11% |
容量:大規模な産業用風力発電所では3MWを超える風力タービンの利用が拡大
小~中規模の風力発電システムには、1.5 MWまでの容量を持つ風力タービン用ギアボックスが見られます。風速が低い場所に適しており、小規模なコミュニティや企業、個人家庭を対象とする場合に好まれます。このカテゴリのタービンは、比較的軽量、コンパクト、かつコスト控えめに設計されており、全体的な効率は不可欠な設計パラメータです。1.5MWから3MWの容量スペクトルは、産業用風力タービンの設置の大部分を占めることが多いです。これらのタービンは大規模発電に使用され、より効率的に大量のエネルギーを生産することができます。これらの風力タービンは、中速から高速の風速帯で最適に動作するように設計されています。このレンジのギヤボックスは、小型のものよりも大きく重いため、耐久性が向上し、摩耗や破損の影響を受けにくくなります。しかし、より多くの材料と高度な技術を必要とするため、イニシャルコストは高くなります。3MW以上の風力タービン用ギアボックスは、業界の最先端を行くものです。これらは主に、大規模な送電網にサービスを提供する大規模な産業用風力発電所に使用されます。このサイズのギヤボックスは、高出力を生成し、高風速地域で最大限の効率を発揮するように設計されています。これらの機械ユニットは、ヘビーデューティーな設計パラメータを備えた相当な大きさで、多くの場合、相当なレベルの技術的洗練と高額の投資を伴います。高いエネルギー出力の可能性を考えると、初期費用にもかかわらず、魅力的な投資回収期間を提供することができます。
タイプ発電機における主変速機の大幅な採用
メインギアボックス(昇圧ギアボックス)は、ほとんどの最新型風力タービンにおいて、風力によってタービンに与えられる低い回転速度を、発電機が発電に使用できる速い速度に上げるための重要なコンポーネントです。ヨーギアボックスは、風力タービンにおいて補助的ではあるが重要な役割を果たしています。この部品は、風力タービンのナセルの向きを制御します。ナセルには、発電機、ギアボックス、ドライブトレイン、ブレーキアセンブリなど、タービンのすべての発電部品が入っています。メインギアボックスとヨーギアボックスのどちらを選択するかは、風力タービンの具体的な要件と求められる機能によって決まります。メインギアボックスは、風の運動エネルギーを貴重な電力に変換して利用するために重要ですが、ヨーギアボックスは、タービンの向きを風と一直線に保つことによって、この発電プロセスを最適化します。どちらのギアボックスも、風力発電の効率と生産性に大きく貢献します。
配備:風力発電プロジェクトの陸上展開への嗜好の高まり
陸上風力タービンは、再生可能エネルギーを生成するために伝統的な景観を活用し、世界中で設置の大部分を占めています。このような用途で使用されるギヤボックスは、洋上で使用されるものよりも腐食性の低い環境に対応するように設計されていますが、変動する風速や風向きに耐えなければなりません。陸上ギヤボックスのメンテナンスは、タービンにアクセスしやすいため、一般的に容易でコストもかかりません。メーカーは、これらのギヤボックスの信頼性と効率を高め、平準化エネルギーコスト(LCoE)を下げることに注力しています。オフショアアプリケーションに関しては、風力タービン用ギアボックスは過酷な海洋環境で動作するように設計されています。これらのギヤボックスは、高湿度、塩水噴霧、強風にさらされ、腐食や摩耗を軽減するために堅牢な構造と高度な材料が必要とされます。オフショアでの配備は、輸送や設置などの物流上の課題があり、初期コストの上昇につながります。ギヤボックスを備えた風力タービンを陸上と洋上のどちらに配備するかは、場所特有の要因、風のパターン、経済的な考慮事項が大きく影響します。陸上風力発電プロジェクトは、成熟したサプライチェーン、設置やメンテナンスのためのアクセスのしやすさ、それほど過酷でない運転環境といった利点があります。逆に、洋上風力発電は、エネルギー収率が高く、土地利用の対立が少ないことから、人気を集めています。
地域別の洞察
アジア太平洋地域は、再生可能エネルギーに対する需要の増加と風力発電に対する政府の支援により、風力タービン用ギアボックス市場で大きな成長が見込まれています。インド、オーストラリア、日本、韓国では、現在進行中の風力発電プロジェクトがいくつかあり、同地域での風力タービン用ギアボックス需要が増加しています。北米は風力タービン用ギアボックスの成熟市場であり、米国は世界最大の風力発電国です。米国政府は税控除を通じて風力発電の市場開拓を支援しており、これが同地域の風力タービン用ギアボックス市場の拡大に寄与しています。ドイツ、スペイン、デンマーク、英国、エジプト、南アフリカ、モロッコなどの国々が風力タービンの配備に投資しており、風力タービン用ギアボックスの需要拡大が期待されています。
FPNVポジショニング・マトリックス
FPNVポジショニングマトリックスは風力タービン用ギアボックス市場の評価において極めて重要です。事業戦略や製品満足度に関連する主要指標を調査し、ベンダーの包括的な評価を提供します。この綿密な分析により、ユーザーは各自の要件に沿った十分な情報に基づいた意思決定を行うことができます。評価に基づき、ベンダーは成功の度合いが異なる4つの象限に分類されます:フォアフロント(F)、パスファインダー(P)、ニッチ(N)、バイタル(V)です。
市場シェア分析
市場シェア分析は、風力タービン用ギアボックス市場におけるベンダーの現状について、洞察に満ちた詳細な調査を提供する包括的なツールです。全体的な収益、顧客基盤、その他の主要指標についてベンダーの貢献度を綿密に比較・分析することで、企業の業績や市場シェア争いの際に直面する課題について理解を深めることができます。さらに、この分析により、調査対象基準年に観察された累積、断片化の優位性、合併の特徴などの要因を含む、この分野の競合特性に関する貴重な考察が得られます。このような詳細レベルの拡大により、ベンダーはより多くの情報に基づいた意思決定を行い、市場で競争優位に立つための効果的な戦略を考案することができます。
1.市場の浸透度:主要企業が提供する市場に関する包括的な情報を提示しています。
2.市場の開拓度:有利な新興市場を深く掘り下げ、成熟市場セグメントにおける浸透度を分析しています。
3.市場の多様化:新製品の発売、未開拓の地域、最近の開発、投資に関する詳細な情報を提供します。
4.競合の評価と情報:市場シェア、戦略、製品、認証、規制状況、特許状況、主要企業の製造能力について徹底的な評価を行います。
5.製品開発およびイノベーション:将来の技術、研究開発活動、画期的な製品開発に関する知的洞察を提供します。
1.風力タービン用ギアボックス市場の市場規模および予測は?
2.風力タービン用ギアボックス市場の予測期間中に投資を検討すべき製品、セグメント、用途、分野は何か?
3.風力タービン用ギアボックス市場の技術動向と規制枠組みは?
4.風力タービン用ギアボックス市場における主要ベンダーの市場シェアは?
5.風力タービン用ギアボックス市場への参入に適した形態や戦略的手段は?
[198 Pages Report] The Wind Turbine Gearbox Market size was estimated at USD 18.09 billion in 2023 and expected to reach USD 19.16 billion in 2024, at a CAGR 6.11% to reach USD 27.41 billion by 2030.
A wind turbine gearbox is a crucial component of a wind turbine, responsible for converting the rotational energy from the blades into usable electricity. The market is experiencing growth due to increasing demand for renewable energy and government initiatives for wind power generation projects. However, concerns related to wind turbine gearbox failure and complex design have been a challenge for the industry, and ongoing innovations in gearbox bearings aim to address these issues. Manufacturers are also working to simplify the design of wind turbine gearboxes while maintaining high levels of performance and reliability. Wind energy project funding and investment are expected to increase in the coming years, boosting the growth of the wind turbine gearbox market.
KEY MARKET STATISTICS | |
---|---|
Base Year [2023] | USD 18.09 billion |
Estimated Year [2024] | USD 19.16 billion |
Forecast Year [2030] | USD 27.41 billion |
CAGR (%) | 6.11% |
Capacity: Growing usage of wind turbines with a capacity above 3 MW across large-scale industrial wind farms
Wind turbine gearboxes with a capacity range of up to 1.5 MW are found in small- to medium-scale wind power systems. They are suited to locations with lower wind speeds and are also preferred when the target usage is for smaller communities, businesses, or individual households. Turbines in this category are designed to be relatively light, compact, and cost-moderate, with overall efficiency being an essential design parameter. 1.5 MW to 3 MW capacity spectrum often represents the bulk of industrial wind turbine installations. These turbines are used for large-scale power generation and are capable of producing a significant amount of energy more efficiently. They are designed to operate optimally in moderate to high wind speed zones. The gearboxes in this range are bigger and heavier than the smaller ones, translating into increased endurance and lowered susceptibility to wear and tear. However, they also require more materials and advanced technology, leading to higher initial costs. Wind turbine gearboxes with capacities above 3 MW are at the forefront of the industry. They are used predominantly for large-scale, industrial wind farms that service large electrical grids. Gearboxes this size are designed to produce high output power and to perform in high wind speed areas, delivering the maximum possible efficiency. These machinery units are substantial in size, with heavy-duty design parameters, and often involve a significant level of technical sophistication and high investment. Given their high energy output potential, they offer attractive payback periods notwithstanding their initial costs.
Type: Significant adoption of main gearboxes in the generators
The main gearbox, or the step-up gearbox, is a crucial component in most modern wind turbines to increase the low rotational speed delivered by the wind's force on the turbines into a faster speed that the generator can use to produce electricity. A yaw gearbox plays an auxiliary yet significant role in a wind turbine. This component controls the orientation of the wind turbine's nacelle, which contains all the generating components in a turbine, including the generator, gearbox, drive train, and brake assembly. The selection between a main gearbox and a yaw gearbox depends on the specific requirements of the wind turbine and the desired functionality. While the main gearbox is critical for transforming and harnessing the wind's kinetic energy into valuable electrical power, the Yaw Gearbox optimizes this generation process by keeping the turbine's direction aligned with the wind. Both gearboxes contribute significantly to efficiency and productivity in wind energy production.
Deployment: Increasing preference for onshore deployment of wind power projects
Onshore wind turbines make up the majority of installations worldwide, leveraging traditional landscapes to generate renewable energy. Gearboxes used in these applications are designed to handle less corrosive environments than their offshore counterparts, but they must withstand fluctuating wind speeds and directions. The maintenance of onshore gearboxes is generally easier and less costly due to the accessibility of turbines. Manufacturers are focused on enhancing the reliability and efficiency of these gearboxes to lower the Levelized Cost of Energy (LCoE). Regarding offshore applications, wind turbine gearboxes are designed to operate in harsh marine environments. These gearboxes are subjected to high humidity, salt spray, and formidable winds and require robust construction and advanced materials to mitigate corrosion and wear. Offshore deployments present logistical challenges, such as transportation and installation, which can lead to higher upfront costs. Location-specific factors, wind patterns, and economic considerations largely influence the decision to deploy onshore or offshore wind turbines with gearboxes. Onshore wind projects benefit from a mature supply chain, ease of access for installation and maintenance, and less harsh operational environments. Conversely, offshore wind is gaining traction due to higher energy yields and reduced land-use conflicts.
Regional Insights
The Asia-Pacific region is expected to experience significant growth in the wind turbine gearbox market due to the increasing demand for renewable energy and government support for wind power generation. India, Australia, Japan, and South Korea have several ongoing wind energy projects, increasing the demand for wind turbine gearboxes in the region. North America is a mature market for wind turbine gearboxes, with the United States being the largest wind energy generator in the world. The U.S. government has been supporting wind power development through tax credits, which has contributed to expanding the wind turbine gearbox market in the region. Countries such as Germany, Spain, Denmark, the UK, Egypt, South Africa, and Morocco are investing in deploying wind turbines, which is expected to increase the demand for wind turbine gearboxes.
FPNV Positioning Matrix
The FPNV Positioning Matrix is pivotal in evaluating the Wind Turbine Gearbox Market. It offers a comprehensive assessment of vendors, examining key metrics related to Business Strategy and Product Satisfaction. This in-depth analysis empowers users to make well-informed decisions aligned with their requirements. Based on the evaluation, the vendors are then categorized into four distinct quadrants representing varying levels of success: Forefront (F), Pathfinder (P), Niche (N), or Vital (V).
Market Share Analysis
The Market Share Analysis is a comprehensive tool that provides an insightful and in-depth examination of the current state of vendors in the Wind Turbine Gearbox Market. By meticulously comparing and analyzing vendor contributions in terms of overall revenue, customer base, and other key metrics, we can offer companies a greater understanding of their performance and the challenges they face when competing for market share. Additionally, this analysis provides valuable insights into the competitive nature of the sector, including factors such as accumulation, fragmentation dominance, and amalgamation traits observed over the base year period studied. With this expanded level of detail, vendors can make more informed decisions and devise effective strategies to gain a competitive edge in the market.
Key Company Profiles
The report delves into recent significant developments in the Wind Turbine Gearbox Market, highlighting leading vendors and their innovative profiles. These include AB SKF, Amarillo Gear Company, AutoInvent Transip AB, Bonfiglioli Riduttori S.p.A., Chongqing Gearbox Co.,Ltd, CRRC Corporation Limited, Dalian Huarui Heavy Industry India Company Pvt. Ltd., Dana Incorporated, Dongturbo Electric Company Ltd., Eickhoff Group, Elecon Engineering Company Limited, Flender GmbH, General Electric Company, ISHIBASHI Manufacturing Co., Ltd., Kirloskar Pneumatic Company Limited, Linamar Corporation, ME Production A/S, Miba AG, NGC Group, NORDEX SE, NSK Ltd., RENK GmbH, Schaeffler Group, Siemens Gamesa Renewable Energy, S.A., Suzlon Energy Limited, The Timken Company, VESTAS WIND SYSTEMS A/S, Voith Group, Wikov Industry a.s., Yantai Bonway Manufacturer Co.,Ltd., and ZF Friedrichshafen AG.
Market Segmentation & Coverage
1. Market Penetration: It presents comprehensive information on the market provided by key players.
2. Market Development: It delves deep into lucrative emerging markets and analyzes the penetration across mature market segments.
3. Market Diversification: It provides detailed information on new product launches, untapped geographic regions, recent developments, and investments.
4. Competitive Assessment & Intelligence: It conducts an exhaustive assessment of market shares, strategies, products, certifications, regulatory approvals, patent landscape, and manufacturing capabilities of the leading players.
5. Product Development & Innovation: It offers intelligent insights on future technologies, R&D activities, and breakthrough product developments.
1. What is the market size and forecast of the Wind Turbine Gearbox Market?
2. Which products, segments, applications, and areas should one consider investing in over the forecast period in the Wind Turbine Gearbox Market?
3. What are the technology trends and regulatory frameworks in the Wind Turbine Gearbox Market?
4. What is the market share of the leading vendors in the Wind Turbine Gearbox Market?
5. Which modes and strategic moves are suitable for entering the Wind Turbine Gearbox Market?