表紙:自動車用ガラス繊維コンポジット市場- 成長、動向、予測(2023年-2028年)
市場調査レポート
商品コード
1189945

自動車用ガラス繊維コンポジット市場- 成長、動向、予測(2023年-2028年)

Automotive Glass Fiber Composites Market - Growth, Trends, and Forecasts (2023 - 2028)

出版日: | 発行: Mordor Intelligence | ページ情報: 英文 70 Pages | 納期: 2~3営業日

● お客様のご希望に応じて、既存データの加工や未掲載情報(例:国別セグメント)の追加などの対応が可能です。  詳細はお問い合わせください。

価格
価格表記: USDを日本円(税抜)に換算
本日の銀行送金レート: 1USD=152.41円
自動車用ガラス繊維コンポジット市場- 成長、動向、予測(2023年-2028年)
出版日: 2023年01月18日
発行: Mordor Intelligence
ページ情報: 英文 70 Pages
納期: 2~3営業日
ご注意事項 :
本レポートは最新情報反映のため適宜更新し、内容構成変更を行う場合があります。ご検討の際はお問い合わせください。
  • 全表示
  • 概要
  • 目次
概要

自動車用ガラス繊維コンポジット市場は、2020年~2025年の予測期間において、5.5%を超えるCAGRで推移すると予想されています。

主なハイライト

  • この市場の主な成長要因は、自動車生産の増加、温室効果ガス排出削減のための厳しい政府規制による耐久性と軽量材料の需要の増加です。
  • 自動車用ガラス繊維コンポジットの世界市場の将来は、内装、外装、構造組立品、パワートレインおよびエンジン部品、電気・電子部品など、さまざまな自動車用途における機会により明るいと思われます。自動車構造用ガラス繊維コンポジット市場は、その用途の広さから、最も急速に成長するセグメントとなることが予想されます。
  • 自動車メーカー、ガラス繊維および樹脂サプライヤー間の戦略的提携は、自動車用コンポジット産業のダイナミクスに直接的な影響を与える動向です。中間体の種類の中では、短繊維熱可塑性樹脂(SFT)、長繊維熱可塑性樹脂(LFT)、連続繊維熱可塑性樹脂(CFT)が自動車用途で使用される主なものです。SFTは、主に小型で複雑な形状の部品を特徴とするパワートレインやエンジン部品用途での応用により、金額ベースで最大の市場になると予想されます。

自動車用ガラス繊維コンポジットの市場動向

ガラス繊維複合材料の自動車への採用が進む

自動車が誕生して1世紀以上が経ちますが、その素材はほとんど変わりません。マグネシウム合金からガラス繊維複合材料に至るまで、先進的な材料が新世代の自動車に採用されるようになったのは、ここ数十年来のことです。性能と安全性を維持しながら燃費を向上させるためには、ガラス繊維複合材料などの先端材料が欠かせません。軽いものは重いものに比べて加速するのに必要なエネルギーが少ないため、軽量化素材は自動車の効率アップに大きな可能性を秘めています。車両重量を10%減らすと、燃費が6~8%向上すると言われています。

ガラス繊維複合材料は、ここ数年で普及が進んでいる素材です。ガラス繊維複合材料が比較的成功している理由のひとつは、鉄と比較していくつかの利点があることです。耐腐食性、耐薬品性、軽量性(鋼鉄の3倍の密度)などがあります。グラスファイバーは、主にバンパーやボンネット、ケーシングに使用されています。また、Vベルトやタイミングベルトでは、ガラス繊維にゴムを含浸させ、補強材として使用されています。グラスファイバーは耐摩耗性に優れているため、クラッチやブレーキパッドにも使用されています。クラッチディスクは、グラスファイバーコンポジットの織物で補強され、その完全性を維持しています。

欧州が最大かつ最速の成長市場になると予想される

欧州は、BMW、Volkswagen、Groupe PSAなどの自動車メーカーが自社の車にガラス繊維複合材を採用していることから、最も急速に成長している市場であると言われています。欧州諸国の温室効果ガス排出目標などの政府規制も、自動車メーカーが車両全体の重量を減らすために軽量素材を取り入れる道を開いています。

ドイツは世界でも有数の自動車生産国です。この国は、経済状態に悪影響を及ぼした経済不況からある程度回復しています。ドイツには、Volkswagen AG, Daimler AG, BMW, Ford GmbH, Opelなど、世界有数の自動車メーカーがあります。ドイツでは、年間510万台以上の自動車が生産されています。乗用車やSUVの生産台数の増加に伴い、自動車部品の補強材としてのガラス繊維の需要は、予測期間中に大幅に増加すると予想されます。

自動車用ガラス繊維コンポジット市場の競合分析

自動車用ガラス繊維コンポジット市場は、穏やかな統合が進んでいます。ガラス繊維コンポジット市場の主要企業には、Solvay Group、3B(Braj Binani Group)、Owens Corning、Veplas Group、SAERTEX GmbH &Co.KGなどが挙げられます。また、特にアジア太平洋地域には、アフターマーケット製品を扱う小規模なプレーヤーが存在することも市場の特徴です。

その他の特典。

  • エクセル形式の市場予測(ME)シート
  • アナリストによる3ヶ月間のサポート

目次

第1章 イントロダクション

  • 調査の前提条件
  • 調査範囲

第2章 調査手法

第3章 エグゼクティブサマリー

第4章 市場力学

  • 市場促進要因
  • 市場抑制要因
  • 産業の魅力- ポーターのファイブフォース分析
    • 新規参入業者の脅威
    • 買い手/消費者の交渉力
    • 供給企業の交渉力
    • 代替品の脅威
    • 競争企業間の敵対関係

第5章 市場セグメンテーション

  • 中間タイプ
    • 短繊維熱可塑性樹脂(SFT)
    • 長繊維熱可塑性プラスチック(LFT)
    • 連続繊維熱可塑性樹脂(CFT)
    • その他の中間体タイプ
  • 用途タイプ
    • インテリア
    • エクステリア
    • 構造組み立て品
    • パワートレインコンポーネント
    • その他の用途
  • 地域別
    • 北米
      • 米国
      • カナダ
      • その他北米地域
    • 欧州
      • ドイツ
      • 英国
      • フランス
      • その他の欧州地域
    • アジア太平洋地域
      • 中国
      • 日本
      • インド
      • その他アジア太平洋地域
    • 南米地域
      • ブラジル
      • その他の南米地域
    • 中東・アフリカ地域
      • アラブ首長国連邦
      • 南アフリカ共和国
      • その他の中東・アフリカ地域

第6章 競合情勢

  • ベンダーの市場シェア
  • 企業プロファイル
    • Solvay Group
    • 3B(Braj Binani Group)
    • Owens Corning
    • Jiangsu Changhai Composite Materials
    • Veplas Group
    • SAERTEX GmbH & Co.KG
    • ASAHI FIBER GLASS Co., Ltd.
    • Nippon Sheet Glass Company, Limited

第7章 市場機会と今後の動向

目次
Product Code: 46890

The automotive glass fiber composites market is expected to register a CAGR of over 5.5%, during the forecast period, 2020 - 2025.

Key Highlights

  • The major growth drivers associated with this market are the rise in automotive production and the increasing demand for durable and lightweight materials because of stringent government regulations to reduce greenhouse gas emissions
  • The future of the global automotive glass fiber composites market looks bright with opportunities in different automobile applications, such as interiors, exteriors, structural assembly, power-train and engine components, electrical and electronics, and others. The market for glass fiber composites in automobile structures is expected to be the fastest-growing segment, due to the wide variety of applications.
  • Strategic alliances between car manufacturers, glass fiber and resin suppliers are the trends that have a direct impact on the dynamics of the automotive composites industry. Within the intermediates type, short fiber thermoplastic (SFT), long fiber thermoplastic (LFT), and continuous fiber thermoplastic (CFT) are the major ones that are used in automotive applications. SFT is expected to be the largest market by value, mainly driven by applications in power-train and engine components applications, which feature small complex-shaped components.

Automotive Glass Fiber Composites Market Trends

Increasing Adoption of Glass Fiber Composites in Automobiles

Although automobiles have been around for more than a century, the materials they are made of have mostly remained the same. Only since the past few decades that advanced materials, ranging from magnesium alloys to glass fiber composites, have made their way into new-generation cars. Advanced materials, such as glass fiber composites, are essential for boosting the fuel economy of modern cars, maintaining performance and safety. Since it takes lesser energy to accelerate a lighter object than a heavier one, lightweight materials offer great potential for increasing vehicle efficiency. A 10% reduction in the vehicle's weight can transpire to a 6-8% increase in fuel economy.

Glass fiber composites are materials that have become popular in the past few years. One of the reasons for fiberglass composite's relative success is that it has several advantages when compared to steel. It is corrosion-resistant, has significant chemical resistance, and is lightweight (three times less dense than steel). Fiberglass composite is mainly used in bumpers, hoods, and casings. Another area where this material is used is V-belts and timing belts, where glass strings are impregnated with rubber acting as reinforcement. Abrasion resistance is one other advantage of the fiberglass composite, which is why it is used for producing clutches and brake-pads. Clutch disks are reinforced with woven fiberglass composites to maintain their integrity.

Europe Anticipated to be the Largest and Fastest Growing Market

Europe is touted to be the fastest growing market due to the presence of many car manufacturers, such as BMW, Volkswagen, Groupe PSA, etc., who are adopting glass fiber composites in their cars. Government regulations, such as the greenhouse gas emission target in the European countries are also paving way for OEMs to incorporate light-weight materials to decrease the overall vehicle weight.

Germany is one of the leading automobile manufacturing countries, globally. The country has recovered to a reasonable extent from the economic recession that affected the economic condition of the country adversely. Germany is home to some of the leading global automobile manufacturers, like Volkswagen AG, Daimler AG, BMW, Ford GmbH, and Opel. More than 5.1 million automobiles are annually manufactured in Germany. With an increase in the production of passenger vehicles and SUVs, the demand for fiberglass in the reinforcements of automotive components is expected to significantly increase during the forecast period.

Automotive Glass Fiber Composites Market Competitive Analysis

The automotive glass fiber composites market is mildly consolidated. Some of the major companies in the glass fiber composites market include Solvay Group, 3B (Braj Binani Group), Owens Corning, Veplas Group, and SAERTEX GmbH & Co.KG. The market is also characterized by the presence of much smaller players especially in the Asia-Pacific, region who deal with aftermarket products.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET DYNAMICS

  • 4.1 Market Drivers
  • 4.2 Market Restraints
  • 4.3 Industry Attractiveness - Porter's Five Forces Analysis
    • 4.3.1 Threat of New Entrants
    • 4.3.2 Bargaining Power of Buyers/Consumers
    • 4.3.3 Bargaining Power of Suppliers
    • 4.3.4 Threat of Substitute Products
    • 4.3.5 Intensity of Competitive Rivalry

5 MARKET SEGMENTATION

  • 5.1 Intermediate Type
    • 5.1.1 Short Fiber Thermoplastic (SFT)
    • 5.1.2 Long Fiber Thermoplastic (LFT)
    • 5.1.3 Continuous Fiber Thermoplastic (CFT)
    • 5.1.4 Other Intermediate Types
  • 5.2 Application Type
    • 5.2.1 Interiors
    • 5.2.2 Exteriors
    • 5.2.3 Structural Assembly
    • 5.2.4 Power-train Components
    • 5.2.5 Other Application Types
  • 5.3 Geography
    • 5.3.1 North America
      • 5.3.1.1 United States
      • 5.3.1.2 Canada
      • 5.3.1.3 Rest of North America
    • 5.3.2 Europe
      • 5.3.2.1 Germany
      • 5.3.2.2 United Kingdom
      • 5.3.2.3 France
      • 5.3.2.4 Rest of Europe
    • 5.3.3 Asia-Pacific
      • 5.3.3.1 China
      • 5.3.3.2 Japan
      • 5.3.3.3 India
      • 5.3.3.4 Rest of Asia-Pacific
    • 5.3.4 South America
      • 5.3.4.1 Brazil
      • 5.3.4.2 Rest of South America
    • 5.3.5 Middle-East and Africa
      • 5.3.5.1 United Arab Emirates
      • 5.3.5.2 South Africa
      • 5.3.5.3 Rest of Middle-East and Africa

6 COMPETITIVE LANDSCAPE

  • 6.1 Vendor Market Share
  • 6.2 Company Profiles
    • 6.2.1 Solvay Group
    • 6.2.2 3B (Braj Binani Group)
    • 6.2.3 Owens Corning
    • 6.2.4 Jiangsu Changhai Composite Materials
    • 6.2.5 Veplas Group
    • 6.2.6 SAERTEX GmbH & Co.KG
    • 6.2.7 ASAHI FIBER GLASS Co., Ltd.
    • 6.2.8 Nippon Sheet Glass Company, Limited

7 MARKET OPPORTUNITIES AND FUTURE TRENDS