Product Code: PLS060A
The total market for plastics additives is projected to increase from
$39.6 billion in 2011, to $41.3 billion in 2012, to more than $43.1 billion in
2013, and to nearly $54.7 billion in 2018 yielding a compound annual growth
rate (CAGR) of 4.9% for a period of five years, from 2013 to 2018.
The market for plastics additives in the emerging markets region was $6.0
billion in 2010, increasing to $6.2 billion in 2011. The market is expected to
increase to $6.8 billion in 2013 and to $8.6 billion in 2018, at a CAGR of
4.9%.
The emerging market for plasticizers was worth $2.1 billion in 2011, which
is expected to increase to $2.3 billion by 2013. This segment is further
projected to reach nearly $2.9 billion by 2018, a CAGR of 5.0% over the last
five years.
SUMMARY FIGURE
GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
($ MILLIONS)
Source: BCC Research
INTRODUCTION
Many products are made from plastics (e.g., protective packaging, components
in cars and aircraft, insulating materials, toys, mobile phones, buildings,
medical devices, profiles and pipes). Plastics improve safety, save energy
and can help protect the environment. Plastics are an essential part of
modern-day life, and some activities depend completely on plastics and plastic
products. Plastics and plastic products are made by mixing essential polymers
with additives. Additives make plastics safer, cleaner, tougher and more
colorful, and in some cases, plastics will not function without them.
Additives increase the cost of producing plastics; however, they help conserve
precious, raw material reserves. Without the additives that turn basic
polymers into useful plastics and plastic products, their use would be a lot
more expensive.
The market success of polymers, such as polyvinyl chloride (PVC) or
polypropylene (PP) depends not only on the basic polymer but also on the
additives that make the plastics as useful as they are. Their usefulness is
largely attributed to the polymers used to make them and not to the additives
used. Yet, when concerns arise regarding human health and the environment,
plastics additives are often found to be responsible, and the industry is
required to replace the additive or prove that it is indeed harmless.
STUDY GOALS AND OBJECTIVES
The goal of this market research study is to identify and measure the market
opportunities for the full range of plastics additives. The global additives
market is broken down and measured by various parameters, and future growth is
forecast for both the overall market and every possible market segment.
Regional markets are also measured and examined in detail.
REASONS FOR DOING THE STUDY
This report helps identify various growth opportunities in the field of
plastics additives. The report also can help those in involved in the
production and sale of additive and plastics products take full advantage of
current and future opportunities.
SCOPE OF REPORT
The report has been prepared and presented in a simple, easy to understand
format with a number of tables and charts/figures. A study of applications
and global and regional markets for all types of the plastics additives and
the plastics additives industry has been made in detail. The consolidation
and globalization of the plastics processing industry has been studied in this
report, so that additive manufacturers and suppliers can establish themselves
in all the major regions.
The supply and pricing of raw materials and the basic feedstock of various
plastics additives have been fluctuating greatly with the run-up in prices of
raw materials and energy. This aspect of the plastics processing industry has
also been studied and analyzed in detail in this report.
The environmental/regulatory aspects of different types of plastics additives
continue to present concerns as well as opportunities to additive suppliers.
The effects of these factors on the supply chain, value and demand for
additives have also been studied in detail in this report.
ANALYST CREDENTIALS
Srinivasa Rajaram, the analyst of this report, is a mechanical engineer with
more than 40 years experience in designing factory layouts and setting up
factories. He has set up factories for the production of weighing machines
and dynamic balancing machines in India and has experience in the design,
production and servicing of the above equipment. He was Senior Vice President
of M/S Schenck Avery Ltd., an Indo-German joint venture, and set up the
electronics department for manufacturing various types of electronic weighing
and dynamic balancing equipment. He has authored several technology market
research reports for BCC Research.
Table of Contents
Global Markets for Plastics Additives -- Focus on Emerging Markets
Chapter - 1: INTRODUCTION - Complimentary
- STUDY GOALS AND OBJECTIVES
- REASONS FOR DOING THE STUDY
- SCOPE OF REPORT
- INTENDED AUDIENCE
- INFORMATION SOURCES
- ANALYST CREDENTIALS
- RELATED REPORTS
- BCC ONLINE SERVICES
- DISCLAIMER
Chapter - 2: SUMMARY
- Table Summary: GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
- Figure Summary: GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
Chapter - 3: OVERVIEW
- INDUSTRY CONCEPTS
- IMPORTANCE OF THE INDUSTRY
- LIFE CYCLE ASSESSMENT OF PLASTICS ADDITIVES
- HISTORY OF PLASTICS AND PLASTICS ADDITIVES
- DEVELOPMENT OF PLASTICS ADDITIVES
- KEY MATERIAL TRENDS IN ADDITIVES
- REGULATORY ISSUES
- GOVERNMENT REGULATIONS
Chapter - 4: TECHNOLOGY
- OVERVIEW OF PLASTICS AND ITS MANUFACTURE
- OVERVIEW OF THE PLASTICS INDUSTRY
- MAIN CLASSIFICATION OF PLASTICS
- DIFFERENT TYPES OF PLASTICS
- PLASTICS ADDITIVES
- DESCRIPTIONS OF PLASTICS ADDITIVES
- BIODEGRADABLE PLASTICS
- APPLICATIONS OF PLASTICS ADDITIVES IN AUTOMOBILES
- PLASTICS ADDITIVES IN OTHER TRANSPORTATION APPLICATIONS
- PLASTICS IN PACKAGING
- PLASTICS IN BUILDING AND CONSTRUCTION APPLICATIONS
- PLASTICS IN ELECTRICAL AND ELECTRONICS APPLICATIONS
- PLASTICS IN APPLIANCES
- PLASTICS IN MEDICAL APPLICATIONS
- PLASTICS IN MISCELLANEOUS APPLICATIONS
- PATENT ANALYSIS
Chapter - 5: GLOBAL MARKETS FOR PLASTICS ADDITIVES BY TECHNOLOGY AND APPLICATION
- IMPORTANCE OF PLASTICS AND THE PLASTICS INDUSTRY
- GLOBAL PRODUCTION OF PLASTICS
- GLOBAL MARKET FOR PLASTICS ADDITIVES
- GLOBAL MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES
Chapter - 6: EMERGING MARKETS FOR PLASTICS ADDITIVES
- OVERVIEW OF THE PLASTICS INDUSTRY IN THE EMERGING MARKETS
- MARKET FOR PLASTICS ADDITIVES IN THE EMERGING MARKETS
- EMERGING MARKETS FOR APPLICATIONS OF PLASTICS ADDITIVES
- EMERGING MARKETS FOR PLASTICS ADDITIVES BY COUNTRY
- Table 74: PLASTICS PRODUCTION IN THE EMERGING MARKETS BY COUNTRY/REGION,
THROUGH 2018
- Figure 57: PLASTICS PRODUCTION IN THE EMERGING MARKETS BY
COUNTRY/REGION, THROUGH 2018
Chapter - 7: INDUSTRY STRUCTURE AND COMPETITIVE ANALYSIS
- FACTORS AFFECTING THE PLASTICS ADDITIVES INDUSTRY
- MERGERS, ACQUISITIONS AND EXPANSION IN THE ADDITIVES INDUSTRY
Chapter - 8: APPENDIX A: U.S. PATENTS
- Table 128: LIST OF PATENTS COVERING PLASTICS ADDITIVES
Chapter - 9: APPENDIX B: MANUFACTURER/SUPPLIERS
- Table 129: MANUFACTURERS/SUPPLIERS OF PLASTICS ADDITIVES
Chapter - 10: APPENDIX C: PROFILES OF MAJOR PLASTICS ADDITIVES COMPANIES
- ACCUREL SYSTEMS
- AKCROS CHEMICALS LTD.
- AKCROS CHEMICALS AMERICA
- AKZONOBEL NV
- ALBEMARLE CORP.
- AMPACET CORP.
- AMERIBROM INC.
- ARKEMA INC.
- AXEL PLASTICS RESEARCH LABORATORIES INC.
- BAERLOCHER GMBH
- BASF SE
- B.I. CHEMICALS INC.
- BYK-CHEMIE GMBH
- CABOT CORP.
- CAROLINA COLOR CORP.
- CHEMSON POLYMER-ADDITIVE AG
- CHEMTURA CORP.
- CHEVRON PHILLIPS CHEMICAL CO.
- CLARIANT AG
- COLOR-CHEM INTERNATIONAL CORP.
- CRODA INTERNATIONAL PLC
- CYTEC INDUSTRIES INC.
- DEAD SEA BROMINE GROUP (DSBG)
- DOW CORNING CORP.
- DUPONT CO.
- DUPONT PERFORMANCE ELASTOMERS
- EASTMAN CHEMICAL CO.
- EMERSON & CUMING COMPOSITE MATERIALS INC.
- ENDEX POLYMER ADDITIVES INC.
- ENGELHARD CORP.
- EVONIK INDUSTRIES AG
- FERRO CORP.
- HALSTAB DIVISION
- HOLLIDAY PIGMENTS SA
- HUBEI NANXING POLYMER ADDITIVES CO. LTD.
- J.M. HUBER CORP.
- HURON TECHNOLOGIES INC.
- HYPERION CATALYSIS INTERNATIONAL
- ISHIHARA SANGYO KAISHA LTD.
- ISHIHARA CORP. (U.S.)
- KENRICH PETROCHEMICALS INC.
- KEYSTONE ANILINE CORP.
- LANXESS AG
- M.A. HANNA COLOR
- MILLENNIUM INORGANIC CHEMICALS INC.
- MILLIKEN CHEMICAL
- OCCIDENTAL PETROLEUM CORP.
- POLYONE CORP.
- PRABHU POLY COLOR LTD.
- SAUDI BASIC INDUSTRIES CORP. (SABIC)
- SHANGHAI FURUIHE CHEMICAL INDUSTRY CO. LTD.
- SPECIALTY MINERALS INC.
- SUMITOMO CHEMICAL CO. LTD.
- SUN CHEMICAL GROUP BV
- TEKNOR COLOR CO.
- TSE INDUSTRIES INC.
- UNIROYAL CHEMICAL CO. INC.
- VELSICOL CHEMICAL LLC
- WILLOW RIDGE PLASTICS INC.
- ZEON CHEMICALS LP
Chapter - 11: APPENDIX D: GOVERNMENT REGULATIONS
- REGULATIONS FOR THE USE OF PLASTICS AND PLASTICS ADDITIVES
- REGULATIONS CONCERNING APPLICATIONS OF PLASTICS
- ORGANIZATIONS REGULATING THE USE OF PLASTICS ADDITIVES IN PLASTICS
List of Tables
- Summary Table: GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
- Table 1: KEY MATERIAL TRENDS IN ADDITIVES
- Table 2: KEY ENVIRONMENTAL TRENDS IN ADDITIVES
- Table 3: THERMOPLASTICS AND THEIR USES
- Table 4: THERMOSETS AND THEIR USES
- Table 5: TYPES OF COMMON PLASTICS
- Table 6: TYPES OF SPECIAL-PURPOSE PLASTICS
- Table 7: ADVANTAGES OF PLASTICS ADDITIVES
- Table 8: MAJOR CLASSIFICATIONS OF PLASTICS ADDITIVES
- Table 9: TYPES OF PROPERTY MODIFIERS AND THEIR EFFECTS
- Table 10: TYPES OF PRIMARY PLASTICIZERS AND THEIR PROPERTIES
- Table 11: TYPE OF FILLERS AND THEIR PROPERTIES
- Table 12: ADVANTAGES OF SOLID GLASS MICROSPHERES
- Table 13: MATERIALS USED AS BLOWING AGENTS
- Table 14: U.S. PLASTICS ADDITIVES PATENTS BY COUNTRY, 2006 - 2011
- Table 15: U.S. PLASTIC ADDITIVES PATENTS BY TECHNOLOGY TYPE
- Table 16: U.S. PLASTICS ADDITIVES PATENTS BY YEAR ISSUED, 2006 - 2011
- Table 17: U.S. PLASTICS ADDITIVES PATENTS BY COMPANY, 2006 - 2011
- Table 18: GLOBAL PRODUCTION OF PLASTICS BY REGION, THROUGH 2018
- Table 19: GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
- Table 20: GLOBAL MARKET FOR PLASTICS ADDITIVES BY REGION, THROUGH 2018
- Table 21: GLOBAL MARKET FOR PLASTICIZERS BY TYPE, THROUGH 2018
- Table 22: GLOBAL MARKET FOR PLASTICIZERS BY REGION, THROUGH 2018
- Table 23: GLOBAL MARKET FOR FLAME RETARDANTS BY TYPE, THROUGH 2018
- Table 24: GLOBAL MARKET FOR FLAME RETARDANTS BY REGION, THROUGH 2018
- Table 25: GLOBAL MARKET FOR HEAT STABILIZERS BY TYPE, THROUGH 2018
- Table 26: GLOBAL MARKET FOR HEAT STABILIZERS BY REGION, THROUGH 2018
- Table 27: GLOBAL MARKET FOR FILLERS BY TYPE, THROUGH 2018
- Table 28: GLOBAL MARKET FOR FILLERS BY REGION, THROUGH 2018
- Table 29: GLOBAL MARKET FOR IMPACT MODIFIERS BY TYPE, THROUGH 2018
- Table 30: GLOBAL MARKET FOR IMPACT MODIFIERS BY REGION, THROUGH 2018
- Table 31: GLOBAL MARKET FOR ANTIOXIDANTS BY TYPE, THROUGH 2018
- Table 32: GLOBAL MARKET FOR ANTIOXIDANTS BY REGION, THROUGH 2018
- Table 33: GLOBAL MARKET FOR COLORANTS BY TYPE, THROUGH 2018
- Table 34: GLOBAL MARKET FOR COLORANTS BY REGION, THROUGH 2018
- Table 35: GLOBAL MARKET FOR LUBRICANTS BY TYPE, THROUGH 2018
- Table 36: GLOBAL MARKET FOR LUBRICANTS BY REGION, THROUGH 2018
- Table 37: GLOBAL MARKET FOR LIGHT STABILIZERS BY TYPE, THROUGH 2018
- Table 38: GLOBAL MARKET FOR LIGHT STABILIZERS BY REGION, THROUGH 2018
- Table 39: GLOBAL MARKET FOR BLOWING AGENTS BY TYPE, THROUGH 2018
- Table 40: GLOBAL MARKET FOR BLOWING AGENTS BY REGION, THROUGH 2018
- Table 41: GLOBAL MARKET FOR BIOCIDES BY TYPE, THROUGH 2018
- Table 42: GLOBAL MARKET FOR BIOCIDES BY REGION, THROUGH 2018
- Table 43: GLOBAL MARKET FOR ANTISTATIC AGENTS BY TYPE, THROUGH 2018
- Table 44: GLOBAL MARKET FOR ANTISTATIC AGENTS BY REGION, THROUGH 2018
- Table 45: GLOBAL MARKET FOR MISCELLANEOUS ADDITIVES BY TYPE, THROUGH 2018
- Table 46: GLOBAL MARKET FOR MISCELLANEOUS ADDITIVES BY REGION, THROUGH 2018
- Table 47: GLOBAL MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES BY
INDUSTRY, THROUGH 2018
- Table 48: GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 49: GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 50: GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
PRODUCTS, 2010-2018
- Table 51: GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 52: GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 53: GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 54: GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS PRODUCTS,
THROUGH 2018
- Table 55: GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS INDUSTRIES,
THROUGH 2018
- Table 56: GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 57: GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 58: GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 59: GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 60: GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 61: GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 62: GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS PRODUCTS,
THROUGH 2018
- Table 63: GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 64: GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 65: GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 66: GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 67: GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 68: GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS PRODUCTS,
THROUGH 2018
- Table 69: GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS INDUSTRIES,
THROUGH 2018
- Table 70: GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 71: GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 72: GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
PRODUCTS, THROUGH 2018
- Table 73: GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
INDUSTRIES, THROUGH 2018
- Table 74: PLASTICS PRODUCTION IN THE EMERGING MARKETS BY COUNTRY/REGION,
THROUGH 2018
- Table 75: EMERGING MARKETS FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
- Table 76: EMERGING MARKETS FOR PLASTICIZERS BY TYPE, THROUGH 2018
- Table 77: EMERGING MARKETS FOR FLAME RETARDANTS BY TYPE, THROUGH 2018
- Table 78: EMERGING MARKETS FOR HEAT STABILIZERS BY TYPE, THROUGH 2018
- Table 79: EMERGING MARKETS FOR FILLERS BY TYPE, THROUGH 2018
- Table 80: EMERGING MARKETS FOR IMPACT MODIFIERS BY TYPE, THROUGH 2018
- Table 81: EMERGING MARKETS FOR ANTIOXIDANTS BY TYPE, THROUGH 2018
- Table 82: EMERGING MARKETS FOR COLORANTS BY TYPE, THROUGH 2018
- Table 83: EMERGING MARKETS FOR LUBRICANTS BY TYPE, THROUGH 2018
- Table 84: EMERGING MARKETS FOR LIGHT STABILIZERS BY TYPE, THROUGH 2018
- Table 85: EMERGING MARKETS FOR BLOWING AGENTS BY TYPE, THROUGH 2018
- Table 86: EMERGING MARKETS FOR BIOCIDES BY TYPE, THROUGH 2018
- Table 87: EMERGING MARKETS FOR ANTISTATIC AGENTS BY TYPE, THROUGH 2018
- Table 88: EMERGING MARKETS FOR MISCELLANEOUS ADDITIVES BY TYPE, THROUGH
2018
- Table 89: EMERGING MARKETS FOR APPLICATIONS OF PLASTICS ADDITIVES IN
INDUSTRIES, THROUGH 2018
- Table 90: EMERGING MARKETS FOR APPLICATION OF PLASTICIZERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 91: EMERGING MARKETS FOR APPLICATION OF PLASTICIZERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 92: EMERGING MARKETS FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 93: EMERGING MARKETS FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 94: EMERGING MARKETS FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 95: EMERGING MARKETS FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 96: EMERGING MARKETS FOR APPLICATION OF FILLERS IN VARIOUS PRODUCTS,
THROUGH 2018
- Table 97: EMERGING MARKETS FOR APPLICATION OF FILLERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 98: EMERGING MARKETS FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 99: EMERGING MARKETS FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 100: EMERGING MARKETS FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 101: EMERGING MARKETS FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 102: EMERGING MARKETS FOR APPLICATION OF PLASTICS COLORANTS IN
VARIOUS PRODUCTS, THROUGH 2018
- Table 103: EMERGING MARKETS FOR APPLICATION OF PLASTICS COLORANTS IN
VARIOUS INDUSTRIES, THROUGH 2018
- Table 104: EMERGING MARKETS FOR APPLICATION OF LUBRICANTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 105: EMERGING MARKETS FOR APPLICATION OF LUBRICANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 106: EMERGING MARKETS FOR APPLICATION OF LIGHT STABILIZERS IN
VARIOUS PRODUCTS, THROUGH 2018
- Table 107: EMERGING MARKETS FOR APPLICATION OF LIGHT STABILIZERS IN
VARIOUS INDUSTRIES, THROUGH 2018
- Table 108: EMERGING MARKETS FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 109: EMERGING MARKETS FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 110: EMERGING MARKETS FOR APPLICATION OF BIOCIDES IN VARIOUS
PRODUCTS, THROUGH 2018
- Table 111: EMERGING MARKETS FOR APPLICATION OF BIOCIDES IN VARIOUS
INDUSTRIES, THROUGH 2018
- Table 112: EMERGING MARKETS FOR APPLICATION OF ANTISTATIC AGENTS IN
VARIOUS PRODUCTS, THROUGH 2018
- Table 113: EMERGING MARKETS FOR APPLICATION OF ANTISTATIC AGENTS IN
VARIOUS INDUSTRIES, THROUGH 2018
- Table 114: EMERGING MARKETS FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
PRODUCTS, THROUGH 2018
- Table 115: EMERGING MARKETS FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
INDUSTRIES, THROUGH 2018
- Table 116: MARKET FOR PLASTICS ADDITIVES IN THE EMERGING MARKETS BY
COUNTRY/REGION, THROUGH 2018
- Table 117: BRAZILIAN MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
- Table 118: BRAZILIAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, THROUGH 2018
- Table 119: REST OF SOUTH AMERICA MARKET FOR PLASTICS ADDITIVES BY TYPE,
THROUGH 2018
- Table 120: REST OF SOUTH AMERICA MARKET FOR APPLICATION OF PLASTICS
ADDITIVES IN VARIOUS INDUSTRIES, THROUGH 2018
- Table 121: SOUTH AFRICAN MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH
2018
- Table 122: SOUTH AFRICAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, THROUGH 2018
- Table 123: REST OF AFRICA MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH
2018
- Table 124: REST OF AFRICA MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, THROUGH 2018
- Table 125: MIDDLE EAST MARKET FOR PLASTICS ADDITIVES BY TYPE, THROUGH 2018
- Table 126: MIDDLE EAST MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, THROUGH 2018
- Table 127: LIST OF MERGERS/ACQUISITIONS/EXPANSIONS IN PLASTICS ADDITIVE
INDUSTRY, 2007 - 2012
- Table 128: LIST OF PATENTS COVERING PLASTICS ADDITIVES
- Table 129: MANUFACTURERS/SUPPLIERS OF PLASTICS ADDITIVES
List of Figures
- Summary Figure: GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
- Figure 1: GLOBAL PRODUCTION OF PLASTICS BY REGION, 2010-2018
- Figure 2: GLOBAL MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
- Figure 3: GLOBAL MARKET FOR PLASTICS ADDITIVES BY REGION, 2010-2018
- Figure 4: GLOBAL MARKET FOR PLASTICIZERS BY TYPE, 2010-2018
- Figure 5: GLOBAL MARKET FOR PLASTICIZERS BY REGION, 2010-2018
- Figure 6: GLOBAL MARKET FOR FLAME RETARDANTS BY TYPE, 2010-2018
- Figure 7: GLOBAL MARKET FOR FLAME RETARDANTS BY REGION, 2010-2018
- Figure 8: GLOBAL MARKET FOR HEAT STABILIZERS, 2010-2018
- Figure 9: GLOBAL MARKET FOR HEAT STABILIZERS BY REGION, 2010-2018
- Figure 10: GLOBAL MARKET FOR FILLERS BY REGION, 2010-2018
- Figure 11: GLOBAL MARKET FOR FILLERS BY REGION, 2010-2018
- Figure 12: GLOBAL MARKET FOR IMPACT MODIFIERS BY TYPE, 2010-2018
- Figure 13: GLOBAL MARKET FOR IMPACT MODIFIERS BY REGION, 2010-2018
- Figure 14: GLOBAL MARKET FOR ANTIOXIDANTS BY TYPE, 2010-2018
- Figure 15: GLOBAL MARKET FOR ANTIOXIDANTS BY REGION, 2010-2018
- Figure 16: GLOBAL MARKET FOR COLORANTS BY TYPE, 2010-2018
- Figure 17: GLOBAL MARKET FOR COLORANTS BY REGION, 2010-2018
- Figure 18: GLOBAL MARKET FOR LUBRICANTS BY TYPE, 2010-2018
- Figure 19: GLOBAL MARKET FOR LUBRICANTS BY REGION, 2010-2018
- Figure 20: GLOBAL MARKET FOR LIGHT STABILIZERS BY TYPE, 2010-2018
- Figure 21: GLOBAL MARKET FOR LIGHT STABILIZERS BY REGION, 2010-2018
- Figure 22: GLOBAL MARKET FOR BLOWING AGENTS BY TYPE, 2010-2018
- Figure 23: GLOBAL MARKET FOR BLOWING AGENTS BY REGION, 2010-2018
- Figure 24: GLOBAL MARKET FOR BIOCIDES BY TYPE, 2010-2018
- Figure 25: GLOBAL MARKET FOR BIOCIDES BY REGION, 2010-2018
- Figure 26: GLOBAL MARKET FOR ANTISTATIC AGENTS BY TYPE, 2010-2018
- Figure 27: GLOBAL MARKET FOR ANTISTATIC AGENTS BY REGION, 2010-2018
- Figure 28: GLOBAL MARKET FOR MISCELLANEOUS ADDITIVE BY TYPE, 2010-2018
- Figure 29: GLOBAL MARKET FOR MISCELLANEOUS ADDITIVES BY REGION, 2010-2018
- Figure 30: GLOBAL MARKET FOR APPLICATIONS OF PLASTICS ADDITIVES BY
INDUSTRY, 2010-2018
- Figure 31: GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 32: GLOBAL MARKET FOR APPLICATION OF PLASTICIZERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 33: GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 34: GLOBAL MARKET FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 35: GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 36: GLOBAL MARKET FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 37: GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS PRODUCTS,
2010-2018
- Figure 38: GLOBAL MARKET FOR APPLICATION OF FILLERS IN VARIOUS INDUSTRIES,
2010-2018
- Figure 39: GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 40: GLOBAL MARKET FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 41: GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 42: GLOBAL MARKET FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 43: GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 44: GLOBAL MARKET FOR APPLICATION OF PLASTICS COLORANTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 45: GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 46: GLOBAL MARKET FOR APPLICATION OF LUBRICANTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 47: GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 48: GLOBAL MARKET FOR APPLICATION OF LIGHT STABILIZERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 49: GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 50: GLOBAL MARKET FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 51: GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS PRODUCTS,
2010-2018
- Figure 52: GLOBAL MARKET FOR APPLICATION OF BIOCIDES IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 53: GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 54: GLOBAL MARKET FOR APPLICATION OF ANTISTATIC AGENTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 55: GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
PRODUCTS, 2010-2018
- Figure 56: GLOBAL MARKET FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
INDUSTRIES, 2010-2018
- Figure 57: PLASTICS PRODUCTION IN THE EMERGING MARKETS BY COUNTRY/REGION,
THROUGH 2018
- Figure 58: EMERGING MARKETS FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
- Figure 59: EMERGING MARKETS FOR PLASTICIZERS BY TYPE, 2010-2018
- Figure 60: EMERGING MARKETS FOR FLAME RETARDANTS BY TYPE, 2010-2018
- Figure 61: EMERGING MARKETS FOR HEAT STABILIZERS BY TYPE, 2010-2018
- Figure 62: EMERGING MARKETS FOR FILLERS BY TYPE, 2010-2018
- Figure 63: EMERGING MARKETS FOR IMPACT MODIFIERS BY TYPE, THROUGH 2018
- Figure 64: EMERGING MARKETS FOR ANTIOXIDANTS BY TYPE, THROUGH 2018
- Figure 65: EMERGING MARKETS FOR COLORANTS BY TYPE, 2010-2018
- Figure 66: EMERGING MARKETS FOR LUBRICANTS BY TYPE, 2010-2018
- Figure 67: EMERGING MARKETS FOR LIGHT STABILIZERS BY TYPE, 2010-2018
- Figure 68: EMERGING MARKETS FOR BLOWING AGENTS BY TYPE, 2010-2018
- Figure 69: EMERGING MARKETS FOR BIOCIDES BY TYPE, 2010-2018
- Figure 70: EMERGING MARKETS FOR ANTISTATIC AGENTS BY TYPE, THROUGH 2018
- Figure 71: EMERGING MARKETS FOR MISCELLANEOUS ADDITIVES BY TYPE, 2010-2018
- Figure 72: EMERGING MARKETS FOR APPLICATIONS OF PLASTICS ADDITIVES IN
INDUSTRIES, THROUGH 2018
- Figure 73: EMERGING MARKETS FOR APPLICATION OF PLASTICIZERS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 74: EMERGING MARKETS FOR APPLICATION OF PLASTICIZERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 75: EMERGING MARKETS FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 76: EMERGING MARKETS FOR APPLICATION OF FLAME RETARDANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Figure 77: EMERGING MARKETS FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
PRODUCTS, THROUGH 2018
- Figure 78: EMERGING MARKETS FOR APPLICATION OF HEAT STABILIZERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 79: EMERGING MARKETS FOR APPLICATION OF FILLERS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 80: EMERGING MARKETS FOR APPLICATION OF FILLERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 81: EMERGING MARKETS FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 82: EMERGING MARKETS FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 83: EMERGING MARKETS FOR APPLICATION OF IMPACT MODIFIERS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 84: EMERGING MARKETS FOR APPLICATION OF ANTIOXIDANTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 85: EMERGING MARKETS FOR APPLICATION OF PLASTICS COLORANTS IN
VARIOUS PRODUCTS, 2010-2018
- Figure 86: EMERGING MARKETS FOR APPLICATION OF PLASTICS COLORANTS IN
VARIOUS INDUSTRIES, 2010-2018
- Figure 87: EMERGING MARKETS FOR APPLICATION OF LUBRICANTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 88: EMERGING MARKETS FOR APPLICATION OF LUBRICANTS IN VARIOUS
INDUSTRIES, THROUGH 2018
- Figure 89: EMERGING MARKETS FOR APPLICATION OF LIGHT STABILIZERS IN
VARIOUS PRODUCTS, 2010-2018
- Figure 90: EMERGING MARKETS FOR APPLICATION OF LIGHT STABILIZERS IN
VARIOUS INDUSTRIES, 2010-2018
- Figure 91: EMERGING MARKETS FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
PRODUCTS, 2010-2018
- Figure 92: EMERGING MARKETS FOR APPLICATION OF BLOWING AGENTS IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 93: EMERGING MARKETS FOR APPLICATION OF BIOCIDES IN VARIOUS
PRODUCTS, 2010-2018
- Figure 94: EMERGING MARKETS FOR APPLICATION OF BIOCIDES IN VARIOUS
INDUSTRIES, 2010-2018
- Figure 95: EMERGING MARKETS FOR APPLICATION OF ANTISTATIC AGENTS IN
VARIOUS PRODUCTS, 2010-2018
- Figure 96: EMERGING MARKETS FOR APPLICATION OF ANTISTATIC AGENTS IN
VARIOUS INDUSTRIES, 2010-2018
- Figure 97: EMERGING MARKETS FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
PRODUCTS, 2010-2018
- Figure 98: EMERGING MARKETS FOR APPLICATION OF MISCELLANEOUS ADDITIVES IN
INDUSTRIES, 2010-2018
- Figure 99: MARKET FOR PLASTICS ADDITIVES IN THE EMERGING MARKETS BY
COUNTRY/REGION, 2010-2018
- Figure 100: BRAZILIAN MARKET FOR PLASTIC ADDITIVES BY TYPE, 2010-2018
- Figure 101: BRAZILIAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, 2010-2018
- Figure 102: REST OF SOUTH AMERICA MARKET FOR PLASTICS ADDITIVES BY TYPE,
2010-2018
- Figure 103: REST OF SOUTH AMERICA MARKET FOR APPLICATION OF PLASTICS
ADDITIVES IN VARIOUS INDUSTRIES, 2010-2018
- Figure 104: SOUTH AFRICAN MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
- Figure 105: SOUTH AFRICAN MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, 2010-2018
- Figure 106: REST OF AFRICA MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
- Figure 107: REST OF AFRICA MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, 2010-2018
- Figure 108: MIDDLE EAST MARKET FOR PLASTICS ADDITIVES BY TYPE, 2010-2018
- Figure 109: MIDDLE EAST MARKET FOR APPLICATION OF PLASTICS ADDITIVES IN
VARIOUS INDUSTRIES, 2010-2018
